Comparison of Stress Distribution in Surrounding Bone during Insertion of Dental Implants on Four Implant Threads under the Effect of an Impact: A Finite Element Study

2022 ◽  
Vol 54 ◽  
pp. 89-101
Author(s):  
Noureddine Djebbar ◽  
Abdessamed Bachiri ◽  
Benali Boutabout
Keyword(s):  
Finite Element ◽  
Stress Distribution ◽  
Load Transfer ◽  
Three Dimensional ◽  
Primary Stability ◽  
Implant Design ◽  
Element Analysis ◽  
Three Dimensional Finite Element ◽  
The Impact ◽  
Surrounding Bone

The design of an implant thread plays a fundamental role in the osseointegration process, particularly in low-density bone. It has been postulated that design features that maximize the surface area available for contact may improve mechanical anchorage and stability in cancellous bone. The primary stability of a dental implant is determined by the mechanical engagement between the implant and bone at the time of implant insertion. The contact area of implant-bone interfaces and the concentrated stresses on the marginal bones are principal concerns of implant designers. Numerous factors influence load transfer at the bone-implant interface, for example, the type of loading, surface structure, amount of surrounding bone, material properties of the implant and implant design. The purpose of this study was to investigate the effects of the impact two different projectile of implant threads on stress distribution in the jawbone using three-dimensional finite element analysis.

scholarly journals Three-Dimensional Finite Element Analysis of Stress Distribution in a Tooth Restored with Full Coverage Machined Polymer Crown

2021 ◽  
Vol 11 (3) ◽  
pp. 1220
Author(s):  
Azeem Ul Yaqin Syed ◽  
Dinesh Rokaya ◽  
Shirin Shahrbaf ◽  
Nicolas Martin
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Distribution ◽  
Three Dimensional ◽  
Intraoral Scanner ◽  
Element Analysis ◽  
Dental Ceramic ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element ◽  
Ceramic Crown

The effect of a restored machined hybrid dental ceramic crown–tooth complex is not well understood. This study was conducted to determine the effect of the stress state of the machined hybrid dental ceramic crown using three-dimensional finite element analysis. Human premolars were prepared to receive full coverage crowns and restored with machined hybrid dental ceramic crowns using the resin cement. Then, the teeth were digitized using micro-computed tomography and the teeth were scanned with an optical intraoral scanner using an intraoral scanner. Three-dimensional digital models were generated using an interactive image processing software for the restored tooth complex. The generated models were imported into a finite element analysis software with all degrees of freedom concentrated on the outer surface of the root of the crown–tooth complex. To simulate average occlusal load subjected on a premolar a total load of 300 N was applied, 150 N at a buccal incline of the palatal cusp, and palatal incline of the buccal cusp. The von Mises stresses were calculated for the crown–tooth complex under simulated load application was determined. Three-dimensional finite element analysis showed that the stress distribution was more in the dentine and least in the cement. For the cement layer, the stresses were more concentrated on the buccal cusp tip. In dentine, stress was more on the cusp tips and coronal 1/3 of the root surface. The conventional crown preparation is a suitable option for machined polymer crowns with less stress distribution within the crown–tooth complex and can be a good aesthetic replacement in the posterior region. Enamic crowns are a good viable option in the posterior region.

Three-dimensional finite element analysis comparative model of tooth–implant nonrigid fixation

SIMULATION ◽  
2020 ◽  
pp. 003754972097278
Author(s):  
Tigran A Muradyan ◽  
Nshan A Muradyan ◽  
Sergey V Verlinski ◽  
Anna Yu Poghosyan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Distribution ◽  
Three Dimensional ◽  
Rigid Fixation ◽  
Element Analysis ◽  
Validation Data ◽  
Vertical Loading ◽  
N Loading ◽  
Three Dimensional Finite Element

Connecting implants with teeth is sometimes considered for the support of prostheses in partial edentulism, especially in periodontally compromised and surgical treated patients. The aim of this study is the presentation of a model of tooth–implant nonrigid fixation in comparison with implant–implant and implant–tooth rigid fixation by three-dimensional (3D) finite element analysis. As a model, a situation with a mandibular second premolar and two molars edentulism was selected. Two implantation options with three prosthetics designs were considered. The comparative analysis of stress and strain distribution values under vertical 100 and 200 N loading was performed. The highest peri-implant crestal bone stress distribution was observed in the model with the implant–tooth rigid fixation with 200 N vertical loading with results of 136.56 MPa. In the model with implant–tooth nonrigid fixation, the maximum strain value was observed in the tooth–connector zone and the stress distribution was higher in the connectors and the prosthesis pontic zone, with a maximal value of 27.77 MPa. The design of a tooth–implant fixed denture could be suggested as a method of choice for rehabilitation of the posterior edentulous segment in cases when only one distal implant could be installed. Further clinical research is required to obtain reliable validation data for the proposed method.

Sign in / Sign up

Export Citation Format

Share Document