Thermal Hardening of the Tin Bronze Alloyed with Nickel

2016 ◽  
Vol 712 ◽  
pp. 267-270
Author(s):  
N.S. Klochkov ◽  
U.P. Egorov ◽  
Oleg M. Utyev
Keyword(s):  
Thermal Hardening ◽  
Maximum Hardness ◽  
Tin Bronze ◽  
Metal Form ◽  
Nickel Additives

The article represents the results of thermal hardening of the stannic bronze alloyed with nickel without quenching. The samples were obtained by molding into a metal form applying centrifugal way of molding. Metallographic and phase analyses were carried out to define the mechanism of thermal hardening. The aging mode was chosen to ensure the maximum hardness of stannic bronze with nickel additives of the chosen structure.

Influence of arc surfacing modes on intergranular penetration of high-tin bronze into steel

2018 ◽  
Vol 2018 (3) ◽  
pp. 34-37
Author(s):  
T.B. Majdanchuk ◽  
◽  
V.M. Ilyushenko ◽  
A.N. Bondarenko ◽  
◽  
...  
Keyword(s):  
Tin Bronze ◽  
Intergranular Penetration

AMBRONZE 413

Alloy Digest ◽  
1969 ◽  
Vol 18 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Stress Corrosion Cracking ◽  
Electrical Contact ◽  
Heat Treating ◽  
Corrosion Cracking ◽  
Tin Bronze

Abstract AMBRONZE 413 is a copper-tin bronze recommended for plater's plates and electrical contact springs. It is relatively immune to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-201. Producer or source: Anaconda American Brass Company.

BUNTING ALLOY 907

Alloy Digest ◽  
1977 ◽  
Vol 26 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Tin Bronze ◽  
Standard Alloy

Abstract BUNTING Alloy 907 is a cast copper-tin alloy (tin bronze) recommended for severe service requirements. It is used widely for bearings and gears. It is a standard alloy for the manufacture of cast gear blanks and has long been known as Phosphor Gear Bronze. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-328. Producer or source: NL Industries Inc., Bearing Division.

COPPER ALLOY No. 510

Alloy Digest ◽  
1971 ◽  
Vol 20 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Fatigue Properties ◽  
Temperature Performance ◽  
Tin Bronze

Abstract COPPER ALLOY No. 510 is a tin bronze containing about 0.25% phosphorus. It combines high strength and toughness with excellent fatigue properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-238. Producer or source: Brass mills.

COPPER ALLOY No. C94300

Alloy Digest ◽  
1984 ◽  
Vol 33 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
High Speed ◽  
Heat Treating ◽  
Lead Alloy ◽  
Good Resistance ◽  
Tin Bronze ◽  
Strength Medium

Abstract Copper Alloy No. C94300 is a cast copper-tin-lead alloy (bronze). It is characterized by low hardness and strength, medium ductility, excellent machinability and good resistance to corrosion. Commercial names formerly used (but not recommended) are (1) Ingot No. 322, (2) Soft Bronze, (3) High-Leaded Tin Bronze and (4) 70-5-25. This alloy is recommended highly for high-speed bearings at light loads. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-470. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C93400

Alloy Digest ◽  
1980 ◽  
Vol 29 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Tin Bronze

Abstract Copper Alloy No. C93400 is cast bronze containing nominally 8% tin and 8% lead. Former commercial names (not recommended) are (1) High-Leaded Tin Bronze and (2) 84-8-8-0. It has excellent machinability, low strength and good resistance to corrosion. Its applications include bearings, pump impellers and corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-401. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C92800

Alloy Digest ◽  
1985 ◽  
Vol 34 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Piston Rings ◽  
Tin Bronze

Abstract Copper Alloy No. C92800 is a cast bronze containing nominally 16% tin and 5% lead. Former commercial names (not recommended) are (1) 295, (2) Leaded Tin Bronze, (3) Ring Metal and (4) 79-16-5-0. It has excellent machinability, moderate strength and good resistance to corrosion. A typical use is piston rings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-490. Producer or source: Copper alloy foundries.

PYRODUR 4923

Alloy Digest ◽  
2018 ◽  
Vol 67 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Scaling Up ◽  
Maximum Hardness ◽  
Temperature Performance ◽  
Molybdenum Addition

Abstract Pyrodur 4923 is a high-temperature resistant stainless steel with molybdenum addition. Special properties include resistant to scaling up to around 600 C (1110 F), and maximum hardness approximately 590 Hv. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1277. Producer or source: Deutsche Edelstahlwerke.

CYCLOPS M4

Alloy Digest ◽  
1978 ◽  
Vol 27 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Abrasion Resistance ◽  
High Speed ◽  
Heat Treating ◽  
Heavy Duty ◽  
Maximum Hardness ◽  
Temperature Performance ◽  
Sharp Edges ◽  
Normal Carbon

Abstract CYCLOPS M4 is a deep-hardening steel that was developed to utilize the excellent abrasion resistance that results from higher-than-normal carbon and vanadium contents in the molybdenum-tungsten family of high-speed steels. It is recommended for heavy-duty cutting operations and for sharp edges for fine cuts. Cyclops M4 should always be used at or near maximum hardness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-335. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document