The Research and Application of Multi-Point and Time-Sharing Measurement Method on NC Machine Tool

2011 ◽  
Vol 697-698 ◽  
pp. 249-252
Author(s):  
Yu Fen Deng ◽  
Jun Jie Guo ◽  
Jin Dong Wang ◽  
H. Wang
Keyword(s):  
Machine Tool ◽  
Basic Principle ◽  
Measurement Method ◽  
Geometric Error ◽  
Laser Tracker ◽  
Time Sharing ◽  
Nc Machine Tool ◽  
Nc Machine

The paper presents the principle and algorithm of multi-point and time-sharing measurement method to detect the machine geometric accuracy.Its basic principle is based on laser tracker and the multilateral method,moreover,only one laser tracker is used in the measurement.Its cost is lower than multi-point and simultaneous measurement.Then the application of the method is introduced on a glass measuring instrument.The geometric error of the machine is separated in x and y direction.

The technical method of geometric error measurement for multi-axis NC machine tool by laser tracker

2012 ◽  
Vol 23 (4) ◽  
pp. 045003 ◽  
Author(s):  
Jindong Wang ◽  
Junjie Guo ◽  
Guoxiong Zhang ◽  
Bao'an Guo ◽  
Hongjian Wang
Keyword(s):  
Machine Tool ◽  
Geometric Error ◽  
Laser Tracker ◽  
Error Measurement ◽  
Nc Machine Tool ◽  
Nc Machine ◽  
Geometric Error Measurement

Method of Volumetric Error Compensation for 3-Axis NC Machine Tool

2012 ◽  
Vol 472-475 ◽  
pp. 2371-2376 ◽  
Author(s):  
Jin Dong Wang ◽  
Jun Jie Guo ◽  
Yu Fen Deng ◽  
Hai Tao Li
Keyword(s):  
Machine Tool ◽  
Error Compensation ◽  
Geometric Error ◽  
Machining Process ◽  
Laser Tracker ◽  
Machining Accuracy ◽  
Volumetric Error ◽  
Nc Machine Tool ◽  
Nc Machine ◽  
G Code

Error compensation is an effective method to improve the machining accuracy of NC machine tool. A laser tracker is used to rapidly and accurately detect the geometric error of NC machine tool in the paper. The machine tool is controlled to move on the preset path in the space, and a laser tracker is used to measure the motion trajectory of the machine tool. Each geometric error can be identified by error separation. Based on the error model of 3-axis machine tool, error compensation can be carried out by modifying the machining process (G code). Results of experiment show that, this measurement method is feasible, and modifying the G code for error compensation is also effective.

The Detection of NC Machine Geometric Accuracy Based on the Principle of Multiple-Time GPS

2011 ◽  
Vol 308-310 ◽  
pp. 531-537
Author(s):  
Yu Fen Deng ◽  
Jun Jie Guo ◽  
Jin Dong Wang ◽  
Jun Feng Lu
Keyword(s):  
Measurement Method ◽  
Geometric Error ◽  
Measurement Precision ◽  
Target Point ◽  
Laser Tracker ◽  
Multiple Time ◽  
Geometric Accuracy ◽  
Gps Positioning ◽  
Nc Machine ◽  
Machine Spindle

This paper presents a measurement method of NC machine geometric accuracy. The principle is that a laser tracker is used to collect a lot of target point coordinates on four different locations around the machine during the machine spindle moving. A redundant equations could be established through target point coordinates,then the exact location of each target point coordinates could be determined by the principles of GPS positioning.Through the target point coordinates,the geometric error of machine could be separated. The method has fast measuring speed and low cost.Moreover the measurement precision is higher than direct measurement only using one laser tracker because the GPS positioning principle is used to avoid the angle measurment of laser tracker.

Geometric Error Compensation Methods of Numerical Control Machine Tool

2012 ◽  
Vol 426 ◽  
pp. 239-242
Author(s):  
Xiao Jun Wang ◽  
Xiao Guang Fu
Keyword(s):  
Machine Tool ◽  
Error Compensation ◽  
Reference Value ◽  
Geometric Error ◽  
Numerical Control ◽  
Control Machine Tool ◽  
Nc Machine Tool ◽  
Machining Center ◽  
Compensation Methods ◽  
Nc Machine

In this paper the characteristics of geometric errors is discussed in detail, error compensation methods used in productive practice and relevant examples are given. Finally, the application of error compensation in different situation is discussed according to the characteristics of machining center. The machine accuracy can be improved by error compensation. It has important practical reference value for reasonable use and maintaining of NC machine tool.

The Study of Compensation Method to Numerically-Controlled Machine Tool Geometrical Error

2014 ◽  
Vol 670-671 ◽  
pp. 1403-1405
Author(s):  
Lian Bing Wang
Keyword(s):  
Machine Tool ◽  
Error Compensation ◽  
Geometric Error ◽  
Compensation Method ◽  
System Error ◽  
Nc Machine Tool ◽  
Geometrical Error ◽  
Compensation Methods ◽  
Nc Machine ◽  
Software Upgrade

In this paper, the cause of nc machine tool geometric error made a more detailed analysis, the system error compensation methods are summarized, and on this basis this paper expounds the applications of all kinds of error compensation method, in order to further realize the accuracy of machine tool software upgrade to lay the foundation.

A Geometric Error Identification and Simulation Method Based on Laser Tracker for Large-Scale Multi-Axis NC Machine Tools

2012 ◽  
Vol 472-475 ◽  
pp. 556-560
Author(s):  
Ji Yang Ma ◽  
Fang Yu Peng ◽  
Rong Yan ◽  
Jing Wu
Keyword(s):  
Machine Tool ◽  
Coordinate System ◽  
Large Scale ◽  
Simulation Method ◽  
Geometric Error ◽  
Least Square ◽  
Laser Tracker ◽  
Profile Error ◽  
Error Identification ◽  
Nc Machine

To evaluate the profile error of manufacture mainly caused by geometric error of machine tool, this paper proposes a geometric error identification and profile error simulation method. The identify method measures each axis of machine tool based on laser tracker, then using the least square method to fit the axis, as a result the coordinate system of each axis can be built. The geometric error of machine tool can be gained by analysis of the coordinate system. Building the kinematics model of large-scale multi-axis NC machine tool considered the geometric error, then using MATLAB and UG second development to achieve simulation of profile error.

Error Modeling and Identification Technology for Circular Path of NC Machine Tools

2013 ◽  
Vol 278-280 ◽  
pp. 345-349
Author(s):  
Zhen Ya He ◽  
Jian Zhong Fu ◽  
Xin Hua Yao
Keyword(s):  
Machine Tool ◽  
Machine Tools ◽  
Measurement Method ◽  
Geometric Error ◽  
Error Modeling ◽  
Circular Path ◽  
Rate Condition ◽  
Nc Machine ◽  
High Feed ◽  
Nc Machine Tools

An error mapping modeling and identification technology for the circular path test of NC machine tools is proposed. First, geometric error modeling of the NC machine tool was established and the theory of the laser measurement method was introduced. Then through further analyzing the influence of the geometric errors to circular path deviations, the error items were identified, such as the displacement errors, backlashes and squareness errors. Finally measurement and compensation experiment of circular path was conducted. The experimental results show that the geometric error modeling is feasible, and the measurement method can be set up easily and rapidly, even can be used to measure smaller radius circular path under a high feed rate condition. After compensation, the accuracy of the circular path of the machine tool is improved by 50.88%.

Sign in / Sign up

Export Citation Format

Share Document