Microstructure Formation and Nanoindentation Behavior of Rapidly Solidified Cu-Fe-Zr Immiscible Alloys

2020 ◽  
Vol 993 ◽  
pp. 39-44
Author(s):  
Xiao Jun Sun ◽  
Jie He ◽  
Jiu Zhou Zhao

The binary Cu-Fe system is characterized by a metastable liquid miscibility gap. WhenZr is added into the Cu-Fe alloy, the miscibility gap can be extended into Cu-Fe-Zr ternary system. In the present study Cu-Fe-Zr alloys were prepared by single-roller melting-spinning method, and the samples were characterized by the SEM, EDS, HRTEM and nanoidentation. The results show that liquid-liquid phase separation into CuZr-rich and FeZr-rich liquids takes place during rapid cooling the Cu-Fe-Zr alloy, and the mechanism depends on the atomic ratio of Cu to Fe. With increasing Zr content, the size of secondary phase formed by the liquid-liquid phase separation reduces to nanoscale. The structure with amorphous Cu-rich nanoparticles embedded in the amorphous Fe-rich matrix was obtained in the as-quenched Cu20Fe20Zr60 alloy. For its structure particularity of the Cu20Fe20Zr60 sample, mechanical evaluation was carried out by using nanoindentation.

2010 ◽  
Vol 10 (16) ◽  
pp. 7795-7820 ◽  
Author(s):  
A. Zuend ◽  
C. Marcolli ◽  
T. Peter ◽  
J. H. Seinfeld

Abstract. Semivolatile organic and inorganic aerosol species partition between the gas and aerosol particle phases to maintain thermodynamic equilibrium. Liquid-liquid phase separation into an organic-rich and an aqueous electrolyte phase can occur in the aerosol as a result of the salting-out effect. Such liquid-liquid equilibria (LLE) affect the gas/particle partitioning of the different semivolatile compounds and might significantly alter both particle mass and composition as compared to a one-phase particle. We present a new liquid-liquid equilibrium and gas/particle partitioning model, using as a basis the group-contribution model AIOMFAC (Zuend et al., 2008). This model allows the reliable computation of the liquid-liquid coexistence curve (binodal), corresponding tie-lines, the limit of stability/metastability (spinodal), and further thermodynamic properties of multicomponent systems. Calculations for ternary and multicomponent alcohol/polyol-water-salt mixtures suggest that LLE are a prevalent feature of organic-inorganic aerosol systems. A six-component polyol-water-ammonium sulphate system is used to simulate effects of relative humidity (RH) and the presence of liquid-liquid phase separation on the gas/particle partitioning. RH, salt concentration, and hydrophilicity (water-solubility) are identified as key features in defining the region of a miscibility gap and govern the extent to which compound partitioning is affected by changes in RH. The model predicts that liquid-liquid phase separation can lead to either an increase or decrease in total particulate mass, depending on the overall composition of a system and the particle water content, which is related to the hydrophilicity of the different organic and inorganic compounds. Neglecting non-ideality and liquid-liquid phase separations by assuming an ideal mixture leads to an overestimation of the total particulate mass by up to 30% for the composition and RH range considered in the six-component system simulation. For simplified partitioning parametrizations, we suggest a modified definition of the effective saturation concentration, Cj*, by including water and other inorganics in the absorbing phase. Such a Cj* definition reduces the RH-dependency of the gas/particle partitioning of semivolatile organics in organic-inorganic aerosols by an order of magnitude as compared to the currently accepted definition, which considers the organic species only.


2016 ◽  
Vol 849 ◽  
pp. 100-106
Author(s):  
Zhong Yuan Wang ◽  
Jie He ◽  
Bai Jun Yang ◽  
Hong Xiang Jiang ◽  
Jiu Zhou Zhao ◽  
...  

Development of liquid-phase separated bulk metallic glasses is retarded due to difficulties in finding of immiscible systems with high glass-forming ability (GFA) of coexistent liquids. Zr-Ce alloy is a typical liquid immiscible system characterized by a liquid miscibility gap. We added Co and Cu into the Zr-Ce immiscible system and optimized the composition of the designed Zr-Ce-Co-Cu immiscible alloys. The solidification experiments were carried out for the quaternary alloys. The result indicates that the melt separated into ZrCo-rich and CeCu-rich liquids upon cooling through the miscibility gap. By optimizing the relative atomic ratio of Co:Cu, the coexistent ZrCo-rich and CeCu-rich liquids automatically assembled eutectic compositions during the liquid-liquid phase separation (LLPS). Under the condition of fast quenching, the two liquids subsequently undergo liquid-to-glass transition, resulting in the formation of composite structure with two glasses in the samples. We successfully developed phased-separated metallic glasses based on the Zr-Ce-Co-Cu immiscible alloys. This work not only strengthens the understanding in the LLPS but also provides a new strategy on the design of the dual glassy composites.


2010 ◽  
Vol 10 (5) ◽  
pp. 12497-12561 ◽  
Author(s):  
A. Zuend ◽  
C. Marcolli ◽  
T. Peter ◽  
J. H. Seinfeld

Abstract. Semivolatile organic and inorganic aerosol species partition between the gas and aerosol particle phases to maintain thermodynamic equilibrium. Liquid-liquid phase separation into an organic-rich and an aqueous electrolyte phase can occur in the aerosol as a result of the salting-out effect. Such liquid-liquid equilibria (LLE) affect the gas/particle partitioning of the different semivolatile compounds and might significantly alter both particle mass and composition as compared to a one-phase particle. We present a new liquid-liquid equilibrium and gas/particle partitioning model, using as a basis the group-contribution model AIOMFAC (Zuend et al., 2008). This model allows the reliable computation of the liquid-liquid coexistence curve (binodal), corresponding tie-lines, the limit of stability/metastability (spinodal), and further thermodynamic properties of the phase diagram. Calculations for ternary and multicomponent alcohol/polyol-water-salt mixtures suggest that LLE are a prevalent feature of organic-inorganic aerosol systems. A six-component polyol-water-ammonium sulphate system is used to simulate effects of relative humidity (RH) and the presence of liquid-liquid phase separation on the gas/particle partitioning. RH, salt concentration, and hydrophilicity (water-solubility) are identified as key features in defining the region of a miscibility gap and govern the extent to which compound partitioning is affected by changes in RH. The model predicts that liquid-liquid phase separation can lead to either an increase or decrease in total particulate mass, depending on the overall composition of a system and the particle water content, which is related to the hydrophilicity of the different organic and inorganic compounds. Neglecting non-ideality and liquid-liquid phase separations by assuming an ideal mixture leads to an overestimation of the total particulate mass by up to 30% for the composition and RH range considered in the six-component system simulation. For simplified partitioning parametrizations, we suggest a modified definition of the effective saturation concentration, C*j, by including water and other inorganics in the absorbing phase. Such a C*j definition reduces the RH-dependency of the gas/particle partitioning of semivolatile organics in organic-inorganic aerosols by an order of magnitude as compared to the currently accepted definition, which considers the organic species only.


2017 ◽  
Vol 727 ◽  
pp. 82-87
Author(s):  
Chang Rong Qu ◽  
Xue Lian Li ◽  
Li Wang ◽  
Jin Bao Liu ◽  
Xing Hua Tong

Liquid-liquid phase separation (LLPS) in the rapidly solidified Fe71Cu10P10B9 alloy under different casting conditions is investigated based on the XRD, DSC, and SEM measurements. It is found that during rapid solidification process, Cu-rich globules precipitated in the matrix which mainly consists of α-Fe and Fe3B0.82P0.18 crystals. With increasing cooling rate, LLPS becomes weaker, leading to less precipitation of Cu-rich globules, while the microstructure of the matrix became finer. Magnetic measurements show that the saturation induction and the coercivity of the present samples increase first and then decrease with increasing cooling rate. The corresponding mechanisms related to magnetic performance are also discussed details.


2021 ◽  
Vol 433 (2) ◽  
pp. 166731
Author(s):  
Yanxian Lin ◽  
Yann Fichou ◽  
Andrew P. Longhini ◽  
Luana C. Llanes ◽  
Pengyi Yin ◽  
...  

Author(s):  
Yanting Xing ◽  
Aparna Nandakumar ◽  
Aleksandr Kakinen ◽  
Yunxiang Sun ◽  
Thomas P. Davis ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document