ABSTRACT
Objective:
To find an optimal force that can be loaded onto an orthodontic microimplant to fulfill the biomechanical demands of orthodontic treatment without diminishing the stability of the microimplant.
Materials and Methods:
Using the finite element analysis method, 3-D computer-aided design models of a microimplant and four cylindrical bone pieces (incorporating cortical bone thicknesses of 0.5, 1.2, 2.0, and 3.0 mm) into which the microimplant was inserted were used. Various force magnitudes of 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, and 4.0 N were then horizontally and separately applied to the microimplant head as inserted into the different bone assemblies. For each bone/force assembly tested, peak stresses developed at areas of intimate contact with the microimplant along the force direction were then calculated using regression analysis and compared with a threshold value at which pathologic bone resorption might develop.
Results:
The resulting peak stresses showed that bone pieces with thicker cortical bone tolerated higher force magnitudes better than did thinner ones. For cortical bone thicknesses of 0.5, 1.2, 2.0, and 3.0 mm, the maximum force magnitudes that could be applied safely were 3.75, 4.1, 4.3, and 4.45 N, respectively.
Conclusions:
For the purpose of diminishing orthodontic microimplant failure, an optimal force that can be safely loaded onto a microimplant should not exceed a value of around 3.75–4.5 N.
Optimal force magnitude loaded to orthodontic microimplants: A finite element analysis