scholarly journals A Rare Presentation of Bilateral Maxillary Dens Invaginatus Diagnosed Using Cone Beam Computed Tomography

2013 ◽  
Vol 3 ◽  
pp. 8 ◽  
Author(s):  
Sainath Dinapadu ◽  
Swathi Aravelli ◽  
Srikanth Pasari ◽  
Narender Reddy Marukala

Dens invaginatus is a developmental variation in the formation of a tooth that causes changes in the internal anatomy of the tooth. The presence of double dens invaginatus is extremely rare. Understanding the type, extension, and complex morphology of dens invaginatus is essential. Diagnosis of this condition using conventional radiographic techniques is not easy. Advanced imaging techniques, such as cone beam computed tomography (CBCT) are very helpful in diagnosis of these complex anatomic variations. In the present case report, we demonstrate the use of CBCT in the evaluation and treatment planning of bilateral maxillary dens invaginatus, of which one presented as a case of double dens.

2017 ◽  
Vol 34 (2) ◽  
pp. 136-142 ◽  
Author(s):  
T. Katarzyna Różyło ◽  
Ingrid Różyło-Kalinowska ◽  
Magdalena Piskórz

2011 ◽  
Vol 45 (2) ◽  
pp. 198-208 ◽  
Author(s):  
F. V. Vier-Pelisser ◽  
A. Pelisser ◽  
L. C. Recuero ◽  
M. V. R. Só ◽  
M. G. Borba ◽  
...  

2012 ◽  
Vol 29 (1) ◽  
pp. 70-73 ◽  
Author(s):  
Frederico Sampaio Neves ◽  
Andréa dos Anjos Pontual ◽  
Paulo Sérgio Flores Campos ◽  
Marco Antônio Gomes Frazão ◽  
Solange Maria de Almeida ◽  
...  

2012 ◽  
Vol 2 ◽  
pp. 13 ◽  
Author(s):  
B. S. Deepak ◽  
T. S. Subash ◽  
V. J. Narmatha ◽  
T. Anamika ◽  
T. K. Snehil ◽  
...  

This review provides an overview of the relevance of imaging techniques such as, computed tomography, cone beam computed tomography, and ultrasound, to endodontic practice. Many limitations of the conventional radiographic techniques have been overcome by the newer methods. Advantages and disadvantages of various imaging techniques in endodontic practice are also discussed.


2020 ◽  
Vol 3 (2) ◽  
pp. 112-118
Author(s):  
Mustafa Mohamadamin ◽  
Karam Thiab ◽  
Ribwar Khalid ◽  
Khidir Khidir

Background and Objectives: The success of root canal therapy is depending on cleaning and shaping of the root canals. The root canals have complex morphology and wide individual variations. The purpose of this study was to investigate the prevalence of second mesiobuccal canal (MB2) of maxillary first molars in Erbil population using cone beam computed tomography (CBCT). Materials and Methods: A total of 101 permanent maxillary first molars were randomly se-lected from Erbil citizens. All teeth were examined for the number of root canals and the pres-ence of second mesiobuccal canal by Cone Beam Computed Tomography (CBCT). Result: The MB2 canal was found in 80.2% (the 95% CI is 72.3% to 87.1%) of the analyzed cas-es (81/101). Conclusion: The second mesiobuccal canal was found in a high percentage of the samples. And it is within normal magnitude in comparison with the common findings in the literature. These results indicate that CBCT is an effective, high-precision diagnostic tool for detecting canals. Keywords: Maxillary first molars, second mesiobuccal canal, cone beam computed tomography, Erbil Citizens.


2019 ◽  
Vol 21 (5) ◽  
pp. 474-476
Author(s):  
Ana Paula Tulio Manfron ◽  
Alessandra Soares Ditzel ◽  
Flávia Gasparini Kiatake Fontão ◽  
Luciana Rei Azevedo-Alanis

AbstractThe retromolar canal is an anatomical variation of the mandibular canal. Its neurovascular bundle may extend to areas of the temporalis tendon, and areas of buccinator muscle insertion in the alveolar process at lower third molar region, beside the retromolar fossa. The observation of the retromolar canal in conventional radiographs is limited by the presence of increased bone condensation in the region due to overlapping anatomical structures. The use of three-dimensional imaging techniques, such as cone beam computed tomography can contribute significantly for the treatment planning.Some complications may occur in surgical procedures involving the retromolar area when the retromolar canals are present, such as hemorrhage, failure in anesthesia and injuries to nerve branches. This study reported an unusual case of a double retromolar canal on the left side of the mandible, that led  to the change of the treatment planning in a 54-year-old male patient. Furthermore, the clinical and surgical consequences of these findings in oral rehabilitation were discussed. The cone beam computed tomography was  an important diagnostic tool in the observation of the presence and the exact location of retromolar canal. Retromolar canals may be detected on a panoramic radiograph. However, more precise information about the anatomical variation can be shown on cross sectional cone beam computed tomography images. Keywords: Anatomic Variation. Mandible. Cone-Beam Computed Tomography. ResumoO canal retromolar é uma variação anatômica do canal da mandíbula. Seu feixe vásculo-nervoso pode se estender para áreas do tendão do músculo temporal, áreas de inserção do músculo bucinador e no processo alveolar na região do terceiro molar inferior, além da fossa retromolar. A observação do canal retromolar em radiografias convencionais é limitada pela presença de condensação óssea com sobreposição de estruturas anatômicas. Devido a esse fato o uso de técnicas de imagem tridimensionais, como a tomografia computadorizada de feixe cônico, contribuem significativamente para o planejamento do tratamento. Algumas complicações podem ocorrer em procedimentos cirúrgicos envolvendo a região retromolar quando o canal retromolar está presente, como hemorragia, falha na anestesia e lesões aos ramos nervosos. Este estudo relatou um caso incomum de canal retromolar duplo, do lado esquerdo da mandíbula, causando alterações no planejamento clínico do tratamento de um paciente do sexo masculino de 54 anos de idade. Além disso, as consequências clínicas e cirúrgicas desses achados na reabilitação bucal foram discutidas. Atomografia computadorizada de feixe cônico apresentou-se como importante ferramenta diagnóstica na observação da presença e localização exata do canal retromolar. Canais retromolares podem ser detectados em uma radiografia panorâmica. No entanto, informações mais precisas sobre esta variação anatômica podem ser mostradas em imagens de tomografia computadorizada de feixe cônico. Palavras-chave: Variação Anatômica. Mandíbula. Tomografia Computadorizada de Feixe Cônico.AbstractThe retromolar canal is an anatomical variation of the mandibular canal. Its neurovascular bundle may extend to areas of the temporalis tendon, and areas of buccinator muscle insertion in the alveolar process at lower third molar region, beside the retromolar fossa. The observation of the retromolar canal in conventional radiographs is limited by the presence of increased bone condensation in the region due to overlapping anatomical structures. The use of three-dimensional imaging techniques, such as cone beam computed tomography can contribute significantly for the treatment planning.Some complications may occur in surgical procedures involving the retromolar area when the retromolar canals are present, such as hemorrhage, failure in anesthesia and injuries to nerve branches. This study reported an unusual case of a double retromolar canal on the left side of the mandible, that led  to the change of the treatment planning in a 54-year-old male patient. Furthermore, the clinical and surgical consequences of these findings in oral rehabilitation were discussed. The cone beam computed tomography was  an important diagnostic tool in the observation of the presence and the exact location of retromolar canal. Retromolar canals may be detected on a panoramic radiograph. However, more precise information about the anatomical variation can be shown on cross sectional cone beam computed tomography images. Keywords: Anatomic Variation. Mandible. Cone-Beam Computed Tomography. ResumoO canal retromolar é uma variação anatômica do canal da mandíbula. Seu feixe vásculo-nervoso pode se estender para áreas do tendão do músculo temporal, áreas de inserção do músculo bucinador e no processo alveolar na região do terceiro molar inferior, além da fossa retromolar. A observação do canal retromolar em radiografias convencionais é limitada pela presença de condensação óssea com sobreposição de estruturas anatômicas. Devido a esse fato o uso de técnicas de imagem tridimensionais, como a tomografia computadorizada de feixe cônico, contribuem significativamente para o planejamento do tratamento. Algumas complicações podem ocorrer em procedimentos cirúrgicos envolvendo a região retromolar quando o canal retromolar está presente, como hemorragia, falha na anestesia e lesões aos ramos nervosos. Este estudo relatou um caso incomum de canal retromolar duplo, do lado esquerdo da mandíbula, causando alterações no planejamento clínico do tratamento de um paciente do sexo masculino de 54 anos de idade. Além disso, as consequências clínicas e cirúrgicas desses achados na reabilitação bucal foram discutidas. Atomografia computadorizada de feixe cônico apresentou-se como importante ferramenta diagnóstica na observação da presença e localização exata do canal retromolar. Canais retromolares podem ser detectados em uma radiografia panorâmica. No entanto, informações mais precisas sobre esta variação anatômica podem ser mostradas em imagens de tomografia computadorizada de feixe cônico. Palavras-chave: Variação Anatômica. Mandíbula. Tomografia Computadorizada de Feixe Cônico.


Sign in / Sign up

Export Citation Format

Share Document