Simulation and Optimization for Polymer Processing

2009 ◽  
pp. 189-218
Author(s):  
J. Sienz ◽  
J.F.T. Pittman ◽  
A. Polynkin
Keyword(s):  
Polymer Processing ◽  
Simulation And Optimization

Observing the relaxation of molecular orientation in sheared liquid crystalline polymer solutions

1990 ◽  
Vol 48 (4) ◽  
pp. 1092-1093
Author(s):  
Wendy Putnam ◽  
Christopher Viney
Keyword(s):  
Molecular Orientation ◽  
Liquid Crystalline Polymer ◽  
Liquid Crystalline ◽  
Crystalline Polymer ◽  
Polymer Processing ◽  
Molecular Alignment ◽  
Global Alignment ◽  
Shear Direction ◽  
Axial Strength ◽  
Strength And Stiffness

Liquid crystalline polymers (solutions or melts) can be spun into fibers and films that have a higher axial strength and stiffness than conventionally processed polymers. These superior properties are due to the spontaneous molecular extension and alignment that is characteristic of liquid crystalline phases. Much of the effort in processing conventional polymers goes into extending and aligning the chains, while, in liquid crystalline polymer processing, the primary microstructural rearrangement involves converting local molecular alignment into global molecular alignment. Unfortunately, the global alignment introduced by processing relaxes quickly upon cessation of shear, and the molecular orientation develops a periodic misalignment relative to the shear direction. The axial strength and stiffness are reduced by this relaxation.Clearly there is a need to solidify the liquid crystalline state (i.e. remove heat or solvent) before significant relaxation occurs. Several researchers have observed this relaxation, mainly in solutions of hydroxypropyl cellulose (HPC) because they are lyotropic under ambient conditions.

Degassing during polymer processing

2002 ◽  
Author(s):  
Ingo Gestring ◽  
Dieter Mewes
Keyword(s):  
Polymer Processing

Numerical Simulation and Optimization of Heat Transfer in Reciprocating Flows

2009 ◽  
Vol 16 (3) ◽  
pp. 287-299 ◽  
Author(s):  
Hossein Shokouhmand ◽  
Ali Mosahebi ◽  
Behrouz Karami Halashi
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Simulation And Optimization

Survey of Relations of Chemical Constituents in Polymer-Based Materials with Brittleness and its Associated Properties

2016 ◽  
Vol 10 (4s) ◽  
pp. 595-600 ◽  
Author(s):  
Witold Brostow ◽  
◽  
Haley E. Hagg Lobland ◽  
Keyword(s):  
Chemical Composition ◽  
Impact Strength ◽  
Free Volume ◽  
Chemical Constituents ◽  
Polymer Processing ◽  
Brittle Behavior ◽  
Composition And Structure ◽  
Common Thread

The property of brittleness for polymers and polymer-based materials (PBMs) is an important factor in determining the potential uses of a material. Brittleness of polymers may also impact the ease and modes of polymer processing, thereby affecting economy of production. Brittleness of PBMs can be correlated with certain other properties and features of polymers; to name a few, connections to free volume, impact strength, and scratch recovery have been explored. A common thread among all such properties is their relationship to chemical composition and morphology. Through a survey of existing literature on polymer brittleness specifically combined with relevant reports that connect additional materials and properties to that of brittleness, it is possible to identify chemical features of PBMs that are connected with observable brittle behavior. Relations so identified between chemical composition and structure of PBMs and brittleness are described herein, advancing knowledge and improving the capacity to design new and to choose among existing polymers in order to obtain materials with particular property profiles.

PREDICTIVE SIMULATION AND OPTIMIZATION ORIENTED MODELING FOR THE EXTRACTION OF METAL IONS FROM SOLUTIONS INTO A NOVEL BIS-SCHIFF BASE

2019 ◽  
pp. 1-8
Author(s):  
F. S. Nworie ◽  
S. O. Ngele ◽  
J. C. Onah
Keyword(s):  
Metal Ions ◽  
Metal Concentration ◽  
Acid Concentration ◽  
Aqueous Media ◽  
Industrial Effluents ◽  
Ligand Concentration ◽  
Simulation And Optimization ◽  
Chemometric Technique ◽  
Model Equations ◽  
Level Of Significance

Metal ions present in waste samples, industrial effluents, acid mines and other aqueous media constitute a serious challenge in different human activities. Solvent extraction a technique for preconcentration, separation and identification of trace amount of metal ions coupled with multivariate chemometric technique was used for the determination of Fe(II) and Cr(III) from solutions in the presence of bis(salicylidene)ethylenediamine (SALEN). The influence of main extraction variables affecting the extraction efficiency was simultaneously studied and regression model equations illustrating the relationship between variables predicted. The extraction parameters (time of extraction, acid concentration, ligand concentration, temperature and metal concentration) were optimized using experimental designs with the contributions of the various parameters to extraction of the metal ions bound to the complexone evaluated using SPSS19.0 software. The statistically determined simulated models for the parameters were R2 = 0.946, 0.727, 0.793, 0.53, 0.53, 1.000 and F- values of 70.400, 13. 285, 15.348, 4.646 and 2.569×105 respectively for time of extraction, acid concentration, ligand concentration, temperature and metal concentration for Cr (III). For Fe (II), R2 = 0.243, 0.371, 0.519, 0.446, 1.000 and F-values of 0.964, 2.953, 4.310, 3.216 and 2.516×105 for time of extraction, acid concentration, ligand concentration, temperature and metal concentration respectively. The level of significance of the models as predicted was both lower than 5% making it feasible, efficient, reproducible and accurate. This means that metal ions at the conditions stated could be removed from waste samples, industrial effluents, acid mines and other aqueous media with extension in industrial scale application.

Sign in / Sign up

Export Citation Format

Share Document