scholarly journals Optimal Setting of Interline Power Flow Controller for Congestion and Contingency Management

2019 ◽  
Vol 4 (2) ◽  
Author(s):  
Charles Akinropo ◽  
Gbenga A Olarinoye
Keyword(s):  
Power System ◽  
Power Flow ◽  
Reactive Power ◽  
Contingency Management ◽  
Severity Index ◽  
Optimal Placement ◽  
Utilization Factor ◽  
Active And Reactive Power ◽  
Flow Controller ◽  
Power Flow Controller

The effect of outages in transmission lines and generator units can be predictable for stable and reliable operation of power system through contingency assessment. Hence, contingency assessment is an important task for stable and effective operation of power system. In this paper, a method of placement of interline power flow controller (IPFC) based on the probability of severity has been proposed. Contingency ranking of lines has been done using Composite Severity Index which is a probabilistic based strategy for the placement of IPFC. IPFC is placed on the line with highest probability of severity during the occurrence of different outages. Thereafter, the size of the IPFC was optimized using cuckoo search algorithm. The proposed methodology has been applied on the IEEE 14 bus system data and results presented. The system overall CSI, active and reactive power were reduced by 7.31%, 10.17% and 14.46% respectively. The results show that optimal placement of IPFC effectively reduces line congestion, improves voltage stability and reduces the active and reactive power loss of the system.Keyword- Power Flow, line utilization factor, severity index, Contingency Management

scholarly journals Optimal Placement of Unified Power Flow Controller by TOPSIS Method for Loss Minimization

2021 ◽  
Vol 10 (1) ◽  
pp. 126-131
Author(s):  
Million Alemayehu Bedasso* ◽  
R. Srinu Naik
Keyword(s):  
Power System ◽  
Power Flow ◽  
Reactive Power ◽  
Optimization Technique ◽  
Optimal Placement ◽  
Unified Power Flow Controller ◽  
Power Losses ◽  
Active And Reactive Power ◽  
Flow Controller ◽  
Power Flow Controller

In order to eliminate active and reactive power losses in the power system, this paper proposes TOPSIS and DE algorithm for determining the best location and parameter settings for the Unified Power Flow Controller (UPFC). To mitigate power losses, the best UPFC allocation can be achieved by re-dispatching load flows in power systems. The cost of incorporating UPFC into the power system. As a consequence, the proposed objective feature in this paper was created to address this problem. The IEEE 14-bus and IEEE 30-bus systems were used as case studies in the MATLAB simulations. When compared to particle swarm optimization, the results show that DE is a simple to use, reliable, and efficient optimization technique than (PSO). The network's active and reactive power losses can be significantly reduced by putting UPFC in the optimum position determined by TOPSIS ranking method.

scholarly journals Real and Reactive Power Control by using 48-pulse Series Connected Three-level NPC Converter for UPFC

2011 ◽  
pp. 1-5
Author(s):  
A. Naveena ◽  
M.Venkateswara Rao
Keyword(s):  
Transmission Line ◽  
Power Flow ◽  
Reactive Power ◽  
System Stability ◽  
Unified Power Flow Controller ◽  
Control Mechanisms ◽  
Active And Reactive Power ◽  
Reactive Power Flow ◽  
Flow Controller ◽  
Power Flow Controller

The equipments based on the power electronics have been improved under the name of Flexible Alternating Current Transmission Systems (FACTS) in the last years. Unified Power Flow Controller (UPFC) is the most widely used FACTS device to control the power flow and to optimize the system stability in the transmission line. UPFC is a FACTS devices that can control active and reactive power flow in transmission line by means of injection controllable series voltage to the transmission line. This paper proposes a new connection for a Unified Power Flow Controller (UPFC) to control the active and reactive power flow control in two sides of a transmission line independently and it regulates bus voltage in the same transmission line, furthermore it is possible to balance line current too. This connection of the UPFC will be called an center node UPFC (C_UPFC). It is one of the newest devices within the FACTS technology. The structure and capability of the C_UPFC is discussed and its control scheme is based on the d-q orthogonal coordinates. According to this, the performance of UPFC for several modes of operations using different control mechanisms based on Proportional-Integral (PI) and PID based controllers has been studied. The obtained simulation results from Matlab/simulink confirm the effective features.

Using Hybrid Power Flow Controller (HPFC) to Improve Performance of Old and Existing Compensators in Power System

2012 ◽  
Vol 622-623 ◽  
pp. 1048-1055 ◽  
Author(s):  
Mojtaba Hakimzadeh ◽  
Reza Sedaghati ◽  
Masoud Parhoodeh
Keyword(s):  
Power System ◽  
Power Flow ◽  
Reactive Power ◽  
Hybrid Structure ◽  
Improve Performance ◽  
Matlab Software ◽  
Hybrid Power ◽  
Flow Controller ◽  
Continuous Power ◽  
Power Flow Controller

In this paper, a hybrid topology of FACTS devices has been investigated to improve stability features of static voltage. The primary assumption is a power system which has been located under SVC parallel compensation. HPFC forms a hybrid controller using IPFC series converters as a hybrid with existing parallel and passive compensator (SVC) in power system. Thus, simultaneous and independent control of active power flow can be reached through transmission lines and the exchanged reactive power values towards sending and receiving line. Using a hybrid structure makes the use of convertors to improve performance of the old and existing compensators in the power system possible. In this study, the power injection model (PIM) has been used to model series-parallel parts of hybrid power flow controller in Newton-Raphson load flow, and all have been simulated in M-file environment of MATLAB software. In order to investigate the effect of this controller on stability properties of static voltage, P-V curve of PQ buses of a prototype system has been evaluated in a continuous power flow (CPF) in M-file environment of MATLAB software. In the section of simulation results, SVC parallel compensation and UPFC series-parallel compensation are compared in terms of the amount of losses, active and reactive power, and improvement of the system’s loading limit with the proposed hybrid structure.

scholarly journals Voltage Profile Improvement with Combined UPFC and IPFC Facts Devices: A Review

2020 ◽  
Vol 1 (1) ◽  
pp. 26-30
Author(s):  
Violet Kaswii ◽  
Michael Juma Saulo
Keyword(s):  
Power System ◽  
Power Flow ◽  
Reactive Power ◽  
Voltage Control ◽  
System Stability ◽  
Voltage Profile ◽  
Transmission Systems ◽  
Facts Devices ◽  
Flow Controller ◽  
Power Flow Controller

The interline power flow controller (IPFC) and the unified power flow controller (UPFC) are both advanced types of flexible AC transmission systems (FACTS). These devices can provide the power system with control of voltage, and that of real and reactive power. This paper reviews the literature on UPFC and IPFC FACTS devices in voltage control and covers two main areas of research (i) voltage control using FACTS devices, and (ii) UPFCs / IPFCs and their applications in power systems. FACTs devices are applied in modern power system networks for the purpose of voltage control while at the same time providing enhanced power system stability. Research has shown that their benefits in the long run outweighs their high cost especially when they are optimally sized and located in the power network. Moreover, in the planning of power transmission systems, a Multi-Criteria Decision Making (MCDM) technique can help in the incorporation of both the costs and technical viability. This approach provides techno-economic optimization and at the same time meeting environmental criteria.

Optimal location of interline power flow controller in a power system network using ABC algorithm

2013 ◽  
Vol 62 (1) ◽  
pp. 91-110 ◽  
Author(s):  
S. Sreejith ◽  
Sishaj Psimon ◽  
M.P. Selvan
Keyword(s):  
Power System ◽  
Transmission Lines ◽  
Power Flow ◽  
Reactive Power ◽  
Optimal Location ◽  
Voltage Profile ◽  
Optimal Position ◽  
Flow Controller ◽  
Power Flow Controller ◽  
Installation Cost

Abstract This paper proposes a methodology based on installation cost for locating the optimal position of interline power flow controller (IPFC) in a power system network. Here both conventional and non conventional optimization tools such as LR and ABC are applied. This methodology is formulated mathematically based on installation cost of the FACTS device and active power generation cost. The capability of IPFC to control the real and reactive power simultaneously in multiple transmission lines is exploited here. Apart from locating the optimal position of IPFC, this algorithm is used to find the optimal dispatch of the generating units and the optimal value of IPFC parameters. IPFC is modeled using Power Injection (PI) model and incorporated into the problem formulation. This proposed method is compared with that of conventional LR method by validating on standard test systems like 5-bus, IEEE 30-bus and IEEE 118-bus systems. A detailed discussion on power flow and voltage profile improvement is carried out which reveals that incorporating IPFC into power system network in its optimal location significantly enhance the load margin as well as the reliability of the system.

Sign in / Sign up

Export Citation Format

Share Document