High Temperature Slag Corrosion of Metallic Materials

CORROSION ◽  
1962 ◽  
Vol 18 (3) ◽  
pp. 95t-102t ◽  
Author(s):  
W. J. GREENERT
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Metallic Materials ◽  
Vanadium Slag ◽  
Relative Resistance ◽  
Good Resistance ◽  
Slag Corrosion

Abstract The relative resistance of various materials and alloys to corrosion by laboratory slags was studied. The materials of interest were subjected to three selected laboratory slags: vanadium slag formed by mixing 70 percent V2O5 and 30 percent Na2SO4, non sulfated vanadium slag formed by mixing 79 percent V2O5 and 21 percent NaVO3, and a sulfate-chloride nonvanadium slag formed from 90 percent Na2SO4 and 10 percent NaCl. Materials showing greatest corrosion resistance to these slags were Hastelloy D, 100 Cr, 50 Cr-50Ni, and 25 Cr-5 Al-bal Fe. Other materials of greater utility showing good resistance were 60 Cr-40 Ni, 30 Cr-30 Ni-40 Co, 14 Cr-14 Mn-bal Fe, and Haynes-Stellite 31. 4.2.3

BÖHLER L359

Alloy Digest ◽  
2012 ◽  
Vol 61 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Good Resistance ◽  
Temperature Performance ◽  
Excellent Corrosion Resistance ◽  
Resistance To Stress ◽  
Nickel Base

Abstract Böhler (or Boehler) L359 is a nickel-base alloy with good resistance to stress-corrosion cracking, and excellent corrosion resistance to all types of nonuniform corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: Ni-700. Producer or source: Böhler-Uddeholm North America.

UNITEMP WASPALOY

Alloy Digest ◽  
1974 ◽  
Vol 23 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Resistance ◽  
Temperature Performance ◽  
Nickel Base ◽  
Corrosion And Oxidation

Abstract UNITEMP WASPALOY is a nickel-base, austenitic precipitation-hardenable alloy. It has excellent strength and good resistance to corrosion and oxidation at temperatures at least to 1600 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-46. Producer or source: Cyclops Corporation. Originally published November 1958, revised March 1974.

AMDRY 755

Alloy Digest ◽  
1974 ◽  
Vol 23 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Powder Metal ◽  
Good Resistance ◽  
Temperature Performance ◽  
Nickel Base

Abstract AMDRY 755 is a nickel-base alloy designed to provide good resistance to combinations of abrasion, corrosion, impact, heat and oxidation. The alloy has good machinability characteristics and is easier to machine than AMDRY 756. It is deposited by spraying on the desired surface at a thickness usually limited to a maximum of 0.080 inch. The data pertain to the deposit after fusing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and powder metal forms. Filing Code: Ni-204. Producer or source: Alloy Metals Inc..

AMDRY 754

Alloy Digest ◽  
1974 ◽  
Vol 23 (1) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Powder Metal ◽  
Good Resistance ◽  
Temperature Performance ◽  
Nickel Base

Abstract AMDRY 754 is a nickel-base alloy formulated to provide good resistance to combinations of abrasion, corrosion, heat, impact shock and oxidation. It is deposited by spraying on the desired surface at a thickness usually limited to a maximum of 0.080 inch. Properties are on the deposit. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and powder metal forms. Filing Code: Ni-199. Producer or source: Alloy Metals Inc..

AK STEEL NITRONIC 30

Alloy Digest ◽  
2013 ◽  
Vol 62 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Stainless Steels ◽  
Abrasion Resistance ◽  
Atmospheric Corrosion ◽  
High Strength ◽  
Good Resistance ◽  
Temperature Performance

Abstract AK Steel Nitronic 30 has good wet abrasion resistance, good resistance to aqueous and atmospheric corrosion, high strength, economy, and improved stress-corrosion cracking resistance over common 18-8 stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: SS-1138. Producer or source: AK Steel Corporation.

CRONIFER 2328

Alloy Digest ◽  
1982 ◽  
Vol 31 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Good Resistance ◽  
High Chromium ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
High Nickel

Abstract CRONIFER 2328 is a titanium-stabilized, high-chromium and high-nickel austenitic stainless steel with additions of molybdenum and copper. It exhibits good corrosion resistance against sulfuric and phosphoric acids. Also, it has good resistance against pitting and stress-corrosion cracking. Cronifer 2328 is used widely in the chemical industry for equipment and for the storage and transportation of various acids and solutions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-411. Producer or source: Vereingte Deutsche Metallwerke AG.

OUTOKUMPU MODA 410S/4000

Alloy Digest ◽  
2020 ◽  
Vol 69 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Resistance ◽  
Temperature Performance ◽  
Corrosive Environments

Abstract Outokumpu Moda 410S/4000 is a 13% Cr, ferritic stainless steel that is used in applications requiring good resistance to mildly corrosive environments. It is a low carbon, non-hardening modification of Type 410 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1329. Producer or source: Outokumpu Oyj.

UDIMET 75

Alloy Digest ◽  
1972 ◽  
Vol 21 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
High Temperature Alloy ◽  
Good Resistance ◽  
Temperature Performance ◽  
Resistance To Oxidation ◽  
Nickel Base

Abstract UDIMET 75 is a nickel-base high-temperature alloy developed for good resistance to oxidation and scaling to 2000 F. It can be fabricated and welded readily. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-171. Producer or source: Special Metals Corporation.

MAGNESIUM AZ91A

Alloy Digest ◽  
1966 ◽  
Vol 15 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Resistance ◽  
Temperature Performance

Abstract Magnesium AZ91A is a magnesium die casting alloy combining good mechanical properties, good casting characteristics and good resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-61. Producer or source: Magnesium Elektron Ltd.

AA 355.0

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Casting Alloy ◽  
Good Resistance ◽  
Temperature Performance

Abstract AA 355.0 is a general-purpose, high-strength casting alloy containing silicon and copper as the major alloying elements. Its casting characteristics are excellent and it is recommended for pressure-tight castings. It can be age hardened and has good resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-291. Producer or source: Various aluminum companies.

Sign in / Sign up

Export Citation Format

Share Document