scholarly journals COMPARATIVE ASSESSMENT OF SOME PHYSICAL PROPERTIES AND ORGANIC MATTER CONTENT OF SOILS DERIVED FROM DIFFERENT PARENT MATERIALS IN AKWA IBOM STATE, NIGERIA

2019 ◽  
Vol 18 (1) ◽  
pp. 107-125
Author(s):  
P. C. OGUIKE ◽  
U. E. UTIN

The study of soils derived from different parent materials is useful in formulating appropriate management schemes for soil health and agricultural production. A comparative assessment of some physical properties and organic matter content of soils formed from coastal plain sands (CPS), sandstone (SST) and river alluvium (ALV) was conducted in Akwa Ibom State, Nigeria. Topsoil samples (0 – 30 cm) were collected from ten points in soils of each of the three parent materials for laboratory analyses. The soil samples were analyzed for texture, macro and micro aggregate stability indices, soil water characteristics, bulk density and organic matter. Data generated were subjected to Analysis of Variance to compare properties of soils of the different parent materials. Significantly different means were separated using the Least Significant Difference at 5% probability level. Results showed that soils of SST and CPS parent materials both had loamy sand texture while that of ALV soil was clay. Bulk density of ALV soil (1.20 Mg m-3) was significantly lower (p≤0.05) than those of CPS (1.55 Mg m-3) and SST (1.39 Mg m-3).  Significantly higher (p≤0.05) mean weight diameter (MWD) (2.01 mm), aggregated silt+clay (51.96%) and clay flocculation index (89.00%) were observed in ALV soils than in CPS and SST soils while the dispersion ratio and clay dispersion index were significantly higher (p≤0.05) in CPS and SST soils than in the ALV soil. Alluvial soil had significantly higher (p≤0.05) saturation water content (SWC), field capacity (FC), permanent wilting point (PWP) and available water content (AWC) of 0.61, 0.45, 0.25 and 0.20 m3 m-3, respectively, than those of CPS and SST. Alluvial soil also had the lowest cumulative infiltration (3.05 cm) and saturated hydraulic conductivity (0.40 cm hr-1) relative to those of CPS and SST. The CPS soil had significantly lower (p≤0.05) organic matter content (2.07%) than SST (3.06%) and ALV (3.34%) soils. Cumulative infiltration (I) significantly and positively correlated with total sand (TS) (r = 0.710*) in the CPS soil, and Ksat (r = 0.681*), MWD (r = 0.829**) and CFI (r = 0.655*) in the SST soil. In the ALV soil, cumulative infiltration positively correlated with total porosity (r = 0.770**) and negatively with bulk density (r = - 0.770**). Saturated hydraulic conductivity (Ksat) had a positive correlation with SWC (r = 0.745*) and TP (r = 0.833**), but a significant and negative correlation with BD (r = - 0.833**) in SST soil. Field capacity (FC) positively and significantly correlated with TP (r = 0.638*) in CPS soil, and with MWD (r = 0.713*), CFI (r = 0.647*) and OM (r = 0.651*) in SST soil and with TP (r = 0.790**) and OM (r = 0.672*) in ALV soil. The correlations of FC with BD (r = - 0.638*) in CPS soil, with CDI (r = -0.647*) in SST soil and with BD (r = -0.790**) in ALV soil were significant and negative. MWD positively and significantly correlated with organic matter (r = 0.699*).  The clayey ALV soil will be suitable for paddy rice production and dry season crops due to its higher water retention capacity than the CPS and SST soils which will be better utilized for vegetable crop production under irrigation. The CPS and SST soils can also be applied to intensive crop production under rain fed condition and supplemented with irrigation.  

2018 ◽  
Vol 2 ◽  
pp. 10-22
Author(s):  
Abdulkadir Abdullahi

The study was conducted to investigate if erosion is a major problem and to identify the effect of erosion on some physical properties on selected farmlands on four farms in Gidan kwano. It was done by observation, interview, and questionnaire and soil sample analysis. The infiltration rate, bulk density, porosity, organic matter content, particle size and aggregate stability were determined for all the sample location. The erosion fields results were compared with the results of the non-eroded fields. The results showed that farming was done with simple method and mechanized equipment when available and erosion was considered a major problem in all the farms. The results revealed that bulk density values ranged between 1.475gcm-3and 1.606gcm-3, cumulative infiltration rate fluctuated between 29.75cm/hr and 37.48cm/hr, porosity ranged between 36.49% and 44.34%, organic matter content fluctuated between 0.29% and 0.73% and aggregate stability ranged between 58.00% and 67.60% for the erosion field. The results also revealed that bulk density fluctuated between 1.458gcm-3and 1.544gcm-3, cumulative infiltration rate ranged between 32.19 cm/hr and 40.48cm/hr, porosity fluctuated between 41.73% and 44.98%, organic matter content ranged between 0.30% and 1.09% and aggregate stability ranged between 63.97% and 68.93% for the non-eroded field. From the results, it provides evidence that the effects of erosion on the physical properties were increased bulk density, decreased infiltration rate, organic matter content, porosity, aggregate stability and percentage sand, silt and clay content. Statistical analysis proved that the results were significant (p<0.05) except for the bulk density and porosity which could be attributed to the swelling and compaction characteristics of the soils.


1987 ◽  
Vol 67 (4) ◽  
pp. 747-763 ◽  
Author(s):  
M. A. NAETH ◽  
A. W. BAILEY ◽  
W. B. McGILL

A study was conducted in Solonetzic mixed prairie of southern Alberta to evaluate and determine the longevity of selected ecosystem responses to pipeline installation. Five adjacent natural gas pipelines on a series of rights-of-way (ROW) were studied at three sites. The lines, which were installed in 1957, 1963, 1968, 1972 and 1981, had diameters of 86, 86, 91, 107 and 107 cm, respectively. Soils were analyzed for particle size distribution, bulk density, pH, electrical conductivity, ion composition, and organic matter content. It was concluded that pipeline construction in Solonetzic mixed prairie range-land initially tended to improve surface soil chemical and physical properties compared to blowouts, but reduced soil quality in vegetated native prairie. Surface bulk density increased to 1.3–1.6 Mg m−3 from an undisturbed density of 0.9–1.0 Mg m−3. Increased densities were evident to 55 cm in all 1981 transects except the trench where subsurface densities were reduced. Chemical changes were associated with reduced organic matter and increased salts at the surface. On the basis of differences between the various ages of pipelines (1981, youngest; 1957, oldest) there was evidence for greater amelioration of chemical changes than of physical disturbances over time. The time needed to restore half the lost organic matter was estimated to be approximately 50 y. Key words: Pipeline, Solonetzic soil, rangeland (native), soil chemistry, bulk density, reclamation


1998 ◽  
Vol 16 (8) ◽  
pp. 583-594 ◽  
Author(s):  
Dhirendra Singh

The effect of exchangeable cations (H+ and Na+). autoclaving, organic matter, anionic surfactants and temperature on the adsorption of phosphamidon on two different types of Indian soil was studied. The adsorption isotherms for all the effects/treatments were in close agreement with the Freundlich equation and yielded S-shaped isotherms. The amount of phosphamidon adsorbed in all cases was higher in medium black (silt loam) soil than alluvial soil (sandy loam) and was related to the organic matter content, clay content, CaCO3 content, surface area and cation-exchange capacity of the soils. The adsorption on both types of soil follows the order H+-soil > Na+-soil > natural soil at 10°C > natural soil at 20°C > autoclaved soil > organic matter-removed soil > anionic surfactant > natural soil at 40°C, which was in accordance with the Freundlich constant, KF, and distribution coefficient, Kd, values. The adsorption capacity of phosphamidon for organic matter and clay content for both the soils was evaluated by calculating the Kom and Kc values when it was found that phosphamidon adsorption was better correlated with the clay content than with the orgnic matter content on the basis of adsorption isotherms. Various thermodynamic parameters such as the thermodynamic equilibrium constant (K0), the standard free energy (ΔG0), the standard enthalpy (ΔH0) and the standard entropy (ΔS0) changes have been calculated as a means of predicting the nature of the isotherms.


Author(s):  
Sidinei Julio Beutler ◽  
Marcos Gervasio Pereira ◽  
Wagner de Souza Tassinari ◽  
Michele Duarte de Menezes ◽  
Gustavo Souza Valladares ◽  
...  

2016 ◽  
Vol 30 (1) ◽  
pp. 19-23 ◽  
Author(s):  
Ewa A. Czyż ◽  
Anthony R. Dexter

Abstract Soil bulk density was investigated as a function of soil contents of clay and organic matter in arable agricultural soils at a range of locations. The contents of clay and organic matter were used in an algorithmic procedure to calculate the amounts of clay-organic complex in the soils. Values of soil bulk density as a function of soil organic matter content were used to estimate the amount of pore space occupied by unit amount of complex. These estimations show that the effective density of the clay-organic matter complex is very low with a mean value of 0.17 ± 0.04 g ml−1 in arable soils. This value is much smaller than the soil bulk density and smaller than any of the other components of the soil considered separately (with the exception of the gas content). This low value suggests that the clay-soil complex has an extremely porous and open structure. When the complex is considered as a separate phase in soil, it can account for the observed reduction of bulk density with increasing content of organic matter.


2020 ◽  
Vol 12 (4) ◽  
pp. 3189-3204
Author(s):  
Anne Hartmann ◽  
Markus Weiler ◽  
Theresa Blume

Abstract. Soil physical properties highly influence soil hydraulic properties, which define the soil hydraulic behavior. Thus, changes within these properties affect water flow paths and the soil water and matter balance. Most often these soil physical properties are assumed to be constant in time, and little is known about their natural evolution. Therefore, we studied the evolution of physical and hydraulic soil properties along two soil chronosequences in proglacial forefields in the Central Alps, Switzerland: one soil chronosequence developed on silicate and the other on calcareous parent material. Each soil chronosequence consisted of four moraines with the ages of 30, 160, 3000, and 10 000 years at the silicate forefield and 110, 160, 4900, and 13 500 years at the calcareous forefield. We investigated bulk density, porosity, loss on ignition, and hydraulic properties in the form of retention curves and hydraulic conductivity curves as well as the content of clay, silt, sand, and gravel. Samples were taken at three depths (10, 30, 50 cm) at six sampling sites at each moraine. Soil physical and hydraulic properties changed considerably over the chronosequence. Particle size distribution showed a pronounced reduction in sand content and an increase in silt and clay content over time at both sites. Bulk density decreased, and porosity increased during the first 10 millennia of soil development. The trend was equally present at both parent materials, but the reduction in sand and increase in silt content were more pronounced at the calcareous site. The organic matter content increased, which was especially pronounced in the topsoil at the silicate site. With the change in physical soil properties and organic matter content, the hydraulic soil properties changed from fast-draining coarse-textured soils to slow-draining soils with high water-holding capacity, which was also more pronounced in the topsoil at the silicate site. The data set presented in this paper is available at the online repository of the German Research Center for Geosciences (GFZ; Hartmann et al., 2020b). The data set can be accessed via the DOI https://doi.org/10.5880/GFZ.4.4.2020.004.


Author(s):  
E.O. Ogundipe

Soil properties are important to the development of agricultural crops. This study determined some selected soil properties of a drip irrigated tomato (Lycopersicon esculentum M.) field at different moisture regime in South-Western Nigeria. The experiment was carried out using Randomized Complete Block Design with frequency and depth of irrigation application as the main plot and sub-plot, respectively in three replicates. Three frequencies (7, 5 and 3 days) and three depths equivalent to 100, 75 and 50% of water requirement were used. Undisturbed and disturbed soil samples were collected from 0-5, 5-10, 10-20 and 20-30 cm soil layers for the determination of some soil properties (soil texture, organic matter content, bulk density, infiltration rate and saturated hydraulic conductivity) were determined using standard formulae. Soil Water Content (SWC) monitoring was conducted every two days using a gravimetric technique. The soil texture was sandy loam for all the soil depths; average value of soil organic matter was highest (1.8%) in the 0-5 cm surface layer and decreased with soil depth; the soil bulk density value before and after irrigation experiment ranged from 1.48 and 1.73 g/cm3 and 1.5 and 1.76 g/cm3, respectively; there was a rapid reduction in the initial infiltration and final infiltration rate. Saturated hydraulic conductivity show similar trend although the 20-30 cm layer had the lowest value (50.84 mm/h); the SWC affect bulk density during the growing season. The study showed that soil properties especially bulk density and organic matter content affect irrigation water movement at different depth..


2020 ◽  
Vol 4 (2) ◽  
pp. 695-698
Author(s):  
Akinrinshola Dare ◽  
Samson O. Okechalu ◽  
Bako Amos ◽  
Thompson Oluwole Ademola ◽  
G. Lapkat Luka

This paper shows the spatial variability of soil properties and factors that contribute to the pattern of variability in Federal College of Forestry Mechanization Research farm.   Nine (9) Soil samples were obtained from various points on the farm using random sampling procedure and these samples were subjected to further for laboratory analysis to determine the particle size fraction, soil pH, organic matter content, and from the data obtained was used to determine the Wilting Point (WP), Saturation Capacity (SC), Field Capacity (FC), Available Water Content (AW), Soil Hydraulic Conductivity (SHC), and Bulk density (BD) using SOILWAT software.  Descriptive statistics and factor analysis techniques was used to analyze the data obtained, the coefficient of variation ranged from 3.045 to 61.825% and factor analysis showed that the variability of the soil properties is as a result of the textural characteristics, and organic matter.


Sign in / Sign up

Export Citation Format

Share Document