scholarly journals Estimating the atmospheric boundary layer height over sloped, forested terrain from surface spectral analysis during BEARPEX

2010 ◽  
Vol 10 (11) ◽  
pp. 25759-25801 ◽  
Author(s):  
W. Choi ◽  
I. C. Faloona ◽  
M. McKay ◽  
A. H. Goldstein ◽  
B. Baker
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Sierra Nevada ◽  
Sonic Anemometer ◽  
Coniferous Forest ◽  
Power Spectra ◽  
Nocturnal Boundary Layer ◽  
Layer Height ◽  
Boundary Layer Height ◽  
Stable Conditions

Abstract. In this study the atmospheric boundary layer (ABL) height (zi) over complex, forested terrain is estimated based on the power spectra and the integral length scale of horizontal winds obtained from a three-axis sonic anemometer during the BEARPEX (Biosphere Effects on Aerosol and Photochemistry) Experiment. The zi values estimated with this technique showed very good agreement with observations obtained from balloon tether sonde (2007) and rawinsonde (2009) measurements under unstable conditions (z/L < 0) at the coniferous forest in the California Sierra Nevada. The behavior of the nocturnal boundary layer height (h) and power spectra of lateral winds and temperature under stable conditions (z/L > 0) is also presented. The nocturnal boundary layer height is found to be fairly well predicted by a recent interpolation formula proposed by Zilitinkevich et al. (2007), although it was observed to only vary from 60–80 m during the experiment. Finally, significant directional wind shear was observed during both day and night with winds backing from the prevailing west-southwesterlies in the ABL (anabatic cross-valley circulation) to consistent southerlies in a layer ~1 km thick just above the ABL before veering to the prevailing westerlies further aloft. We show that this is consistent with the forcing of a thermal wind driven by the regional temperature gradient directed due east in the lower troposphere.

scholarly journals Estimating the atmospheric boundary layer height over sloped, forested terrain from surface spectral analysis during BEARPEX

2011 ◽  
Vol 11 (14) ◽  
pp. 6837-6853 ◽  
Author(s):  
W. Choi ◽  
I. C. Faloona ◽  
M. McKay ◽  
A. H. Goldstein ◽  
B. Baker
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Sierra Nevada ◽  
Sonic Anemometer ◽  
Power Spectra ◽  
Nocturnal Boundary Layer ◽  
Wind Component ◽  
Layer Height ◽  
Boundary Layer Height ◽  
Stable Conditions

Abstract. The atmospheric boundary layer (ABL) height (zi) over complex, forested terrain is estimated based on the power spectra and the integral length scale of cross-stream winds obtained from a three-axis sonic anemometer during the two summers of the BEARPEX (Biosphere Effects on Aerosol and Photochemistry) Experiment. The zi values estimated with this technique show very good agreement with observations obtained from balloon tether sondes (2007) and rawinsondes (2009) under unstable conditions (z/L < 0) at the coniferous forest in the California Sierra Nevada. On the other hand, the low frequency behavior of the streamwise upslope winds did not exhibit significant variations and was therefore not useful in predicting boundary layer height. The behavior of the nocturnal boundary layer height (h) with respect to the power spectra of the v-wind component and temperature under stable conditions (z/L > 0) is also presented. The nocturnal boundary layer height is found to be fairly well predicted by a recent interpolation formula proposed by Zilitinkevich et al. (2007), although it was observed to only vary from 60–80 m during the 2009 experiment in which it was measured. Finally, significant directional wind shear was observed during both day and night soundings. The winds were found to be consistently backing from the prevailing west-southwesterlies within the ABL (the anabatic cross-valley circulation) to southerlies in a layer ~1–2 km thick just above the ABL before veering to the prevailing westerlies further aloft. This shear pattern is shown to be consistent with the forcing of a thermal wind driven by the regional temperature gradient directed east-southeast in the lower troposphere.

scholarly journals Lidar-based remote sensing of atmospheric boundary layer height over land and ocean

2014 ◽  
Vol 7 (1) ◽  
pp. 173-182 ◽  
Author(s):  
T. Luo ◽  
R. Yuan ◽  
Z. Wang
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Marine Boundary Layer ◽  
Mixing Layer ◽  
Layer Height ◽  
Boundary Layer Height ◽  
Lidar Measurements ◽  
Mixing Layer Height ◽  
Atmospheric Radiation Measurement ◽  
Atmospheric Boundary Layer Height

Abstract. Atmospheric boundary layer (ABL) processes are important in climate, weather and air quality. A better understanding of the structure and the behavior of the ABL is required for understanding and modeling of the chemistry and dynamics of the atmosphere on all scales. Based on the systematic variations of the ABL structures over different surfaces, different lidar-based methods were developed and evaluated to determine the boundary layer height and mixing layer height over land and ocean. With Atmospheric Radiation Measurement Program (ARM) Climate Research Facility (ACRF) micropulse lidar (MPL) and radiosonde measurements, diurnal and season cycles of atmospheric boundary layer depth and the ABL vertical structure over ocean and land are analyzed. The new methods are then applied to satellite lidar measurements. The aerosol-derived global marine boundary layer heights are evaluated with marine ABL stratiform cloud top heights and results show a good agreement between them.

scholarly journals A Review of Techniques for Diagnosing the Atmospheric Boundary Layer Height (ABLH) Using Aerosol Lidar Data

2019 ◽  
Vol 11 (13) ◽  
pp. 1590 ◽  
Author(s):  
Ruijun Dang ◽  
Yi Yang ◽  
Xiao-Ming Hu ◽  
Zhiting Wang ◽  
Shuwen Zhang
Keyword(s):  
Boundary Layer ◽  
Air Quality ◽  
Atmospheric Boundary Layer ◽  
Weather Prediction ◽  
Mixing Layer ◽  
Accurate Estimation ◽  
Layer Height ◽  
Boundary Layer Height ◽  
Vertical Distributions ◽  
Multi Wavelength

The height of the atmospheric boundary layer (ABLH) or the mixing layer height (MLH) is a key parameter characterizing the planetary boundary layer, and the accurate estimation of that is critically important for boundary layer related studies, which include air quality forecasts and numerical weather prediction. Aerosol lidar is a powerful remote sensing instrument frequently used to retrieve the ABLH through detecting the vertical distributions of aerosol concentration. Presently available methods for ABLH determination from aerosol lidar are summarized in this review, including a lot of classical methodologies as well as some improved versions of them. Some new recently developed methods applying advanced techniques such as image edge detection, as well as some new methods based on multi-wavelength lidar systems, are also summarized. Although a lot of techniques have been proposed and have already given reasonable results in several studies, it is impossible to recommend a technique which is suitable in all atmospheric scenarios. More accurate instantaneous ABLH from robust techniques is required, which can be used to estimate or improve the boundary layer parameterization in the numerical model, or maybe possible to be assimilated into the weather and environment models to improve the simulation or forecast of weather and air quality in the future.

Atmospheric Boundary Layer Height Monitoring Using a Kalman Filter and Backscatter Lidar Returns

2014 ◽  
Vol 52 (8) ◽  
pp. 4717-4728 ◽  
Author(s):  
Diego Lange ◽  
Jordi Tiana-Alsina ◽  
Umar Saeed ◽  
Sergio Tomas ◽  
Francesc Rocadenbosch
Keyword(s):  
Boundary Layer ◽  
Kalman Filter ◽  
Atmospheric Boundary Layer ◽  
Layer Height ◽  
Boundary Layer Height ◽  
Atmospheric Boundary Layer Height
Sign in / Sign up

Export Citation Format

Share Document