scholarly journals Determination of bromide, chloride, fluoride, nitrate and sulphate by ion chromatography: comparisons of methodologies for rainfall, cloud water and river waters at the Plynlimon catchments of mid-Wales

2007 ◽  
Vol 11 (1) ◽  
pp. 294-300 ◽  
Author(s):  
M. Neal ◽  
C. Neal ◽  
H. Wickham ◽  
S. Harman

Abstract. The results of determination of bromide, chloride, fluoride, nitrate and sulphate using ion chromatography (IC) are compared with those obtained by colorimetric and inductively coupled plasma optical emission spectroscopy (ICPOES) for rainfall, cloud water and stream waters in the Plynlimon experimental catchments of mid-Wales. For bromide, the concentrations determined by IC are lower than those for the colorimetric method used; the colorimetric method probably determined bromide plus organo-bromine compounds. It is suggested that the values determined by the colorimetric method be termed dissolved labile bromine (DLBr). The study shows that sulphate is the overriding form of sulphur in the waters. For chloride and nitrate, measurements by both methods approach a 1:1 relationship that is barely statistically significantly different from unity. For fluoride, the IC method gives lower values than the colorimetric, especially for the stream waters. However, the colorimetric method determines total fluorine so that a difference is to be expected (for example, fluoride strongly complexes with aluminium that is present, especially in the streamwater).

2010 ◽  
Vol 16 (1) ◽  
pp. 65-71 ◽  
Author(s):  
A. Gonzálvez ◽  
M.E. Ghanjaoui ◽  
M. El Rhazi ◽  
M. de la Guardia

A methodology based on inductively coupled plasma optical emission spectroscopy (ICP-OES) after microwave assisted acid digestion has been developed to determine the trace element content of Moroccan argan oil. Limit of detection values equal or lower than few mg/kg were obtained for all elements under study. To assure the accuracy of the whole procedure, recovery studies were carried out on argan oil samples spiked at different concentration levels from 10 to 200 µg/L. Quantitative average recovery values were obtained for all elements evaluated, demonstrating the suitability of this methodology for the determination of trace elements in argan oil samples. Aluminum, calcium, chromium, iron, potassium, lithium, magnesium, sodium, vanadium and zinc were quantitatively determined in Moroccan argan oils being found that their concentration is different of that found in other edible oils thus offering a way for authentication and for the evaluation of possible adulterations.


2009 ◽  
Vol 92 (2) ◽  
pp. 555-560 ◽  
Author(s):  
Kamal Saberyan

Abstract A method is presented for the selective preconcentration and determination of ultratrace amounts of Ce3 ions by inductively coupled plasma-optical emission spectroscopy in the presence of Sm3, La3, Dy3, Yb3, and common interfering ions. In this method, thio-functionalized MCM-41 is used in the preconcentration step. Extraction efficiency and the influence of sample matrix, pH of sample solution, type and minimum amount of tripping acid, and flow rates were investigated. The preconcentration is pH-dependent, and the best results were obtained in the pH range of 8.510.3. The maximum capacity of 2 mg absorbent was found to be 170 4 g. The detection limit of the measurements after the preconcentration step was found to be 114 ng Ce3/L.


Sign in / Sign up

Export Citation Format

Share Document