Effect of Gamma-irradiation on the Physicochemical, Functional, and Antioxidant Properties of Unpigmented Brown Whole Rice Flour

Whole grain brown rice, being a rich source of fiber and other bioactive compounds like polyphenols is effective in reducing the risk of chronic diseases including cardiovascular diseases, hypercholesterolemia and Type II diabetes. The study was aimed to evaluate the effect of gamma irradiation on the physicochemical, functional and antioxidant properties of whole grain brown rice flour. The brown rice flour was conditioned to two different moisture contents of 10% and 12% and treated with gamma irradiation doses of 0 kGy (native or control), 2.5 kGy and 5 kGy. Moisture, protein, fat, ash and carbohydrate content of native flour was found as 10 g/100 g, 6.54 g/100 g, 1.54 g/100 g, 1.0 g/100 g, and 81.48 g/100 g, respectively. The hunter color ‘L’, ‘a’, and ‘b’ values of the native brown rice flour sample were found as 81.95, −0.97 and 17.36, respectively and were non-significantly ( p ≥ 0.05) affected by gamma irradiation. Apparent amylose content was observed to decrease significantly ( p ≤ 0.05) from 29.97 to 20.30 g/100 g with the increase in gamma irradiation dose and moisture content. The pasting properties such as peak viscosity, trough viscosity and final viscosity of all the flour samples decreased significantly ( p ≤ 0.05) with the increase in irradiation dose. The functional properties such as water and oil absorption and emulsion capacities were increased while emulsion stability and foaming stability decreased upon irradiation. Irradiation led to an overall increase in the antioxidant activity of rice flours. In general, FTIR spectra revealed a decrease in the absorption intensities of the functional groups. Therefore, it can be concluded that gamma irradiation can be used as a tool to modify the physicochemical properties of rice flours as well as to improve their antioxidant properties.

Effect of different extrusion methods on physicochemical properties and qualities of noodles based on rice flour

Rice noodles have been manufactured in the food industry using different extrusion methods, such as traditional and modern extrusions, which affect the noodle structure and qualities. Therefore, the effects of the extrusion process on qualities of rice noodles using the same blend of rice flour and crosslinked starch were evaluated. In this study, a capillary rheometer was used as an alternative approach to simulate the traditional extrusion method in which the noodles are obtained by continuously pressing the pregelatinized noodle dough through a die. For modern extrusion, a twin-screw extruder was employed to obtain the noodles in a one-step process. The optimal range of moisture content used in the formulation was studied. Upon cooking, the noodles showed a decrease in cooking time and cooking loss with increasing moisture content in the formulation. All cooked noodles showed comparable tensile strength, but those extruded by a twin-screw extruder had substantially greater elongation. Scanning electron micrographs revealed that the noodles prepared using the extruder had a denser starch matrix, while those obtained from a capillary rheometer showed the aggregation of starch fragments relevant to the existence of starch gelatinization endotherm from differential scanning calorimetry. This indicated that the extrusion process using the twin-screw extruder provided a more uniform starch transformation, i.e., more starch granule disruption and gelatinization, thus giving the noodles a more coherent structure and better extensibility after cooking. The obtained results suggested that different thermomechanical processes used in the noodle industry gave the extruded rice noodles different qualities respective to their different microstructures.

Proximate composition, pasting and functional properties of composite flour blends from cassava and chia seeds flour

The study established the proximate composition, pasting, and functional properties of cassava flour (CF) blended with chia seeds flour (CSF). Composite flour was prepared by blending CF with CSF in the ratios of 95:05, 90:10, 85:15, 80:20, and 75:25 with CF and CSF used as controls, respectively. The effect of blending significantly (p < 0.05) increased protein, fat, fibre, and ash contents as CSF increased. On other hand, moisture and carbohydrate contents decreased significantly. Pasting properties of composite flour blends decreased significantly (p < 0.05) as the incorporation of CSF increased and a noticeable change was observed for composite flour (75:25) except for peak time and pasting temperature. Functional properties of water absorption capacity (WAC) of CSF were significantly different with CF and composite flour blends. Oil absorption capacity (OAC) of CF and CSF were significantly different, while the composite flour blends had varied OAC due to the inclusion of the different amounts of CSF. The swelling capacity (SC) of CF and CSF were not significantly different, but composite flour blends were significantly different from both CSF and CF. The least gelation concentration (LGC) and bulk density (BD) increased significantly as chia seeds increased. Increased concentration of chia CSF in the composite flour blends showed to alter the functional properties. This study recommends composite flour 75:25 for processing semiliquid products like porridge due to reduced pasting properties values that may be associated with increased energy density compared to CF.

Physical, morphological and storage stability of Clove oil nanoemulsion based delivery system

Clove oil based Nanoemulsions (NE) were prepared ultrasonically using Tween 80 and soy lecithin as synthetic and natural surfactants, respectively. The developed NEs were characterized for various parameters (particle size, polydispersity index, zeta potential, morphology, viscosity, colour, turbidity and pH) and the comparative effect of both the surfactants at variable levels (oil:tween 80-1:1, 1:2, 1:3 and 1:4 and oil: soy lecithin- 1:1, 1:1.5 and 1:2) was assessed. It was found that the type of surfactant and oil to surfactant ratio significantly affected particle size and stability of NEs. The NE prepared using tween 80 @1:3 had smallest average droplet diameter (40.9 nm). The formulated NEs were stored at 25 °C and 4 °C and analyzed for turbidity, pH and phase separation up to 90 days. Results revealed that the type and concentration of the surfactant significantly influenced the particle size and stability of NEs. NEs prepared using tween 80 were found to be more viscous than those prepared with soy lecithin. The prepared clove oil NEs have important implication to be used as a natural delivery system to increase the shelf life of food products.

Physicochemical, structural, and rheological characteristics of corn starch after thermal-ultrasound processing

Thermal-ultrasound treatment is a green technology that can significantly alter the structural and functional properties of starches. This research extend the effect of at different temperatures (25 °C, 45 °C, and 65 °C) and times (30 and 60 min) on the physicochemical, structural, and rheological properties of corn starch was studied. Amylose content, solubility, swelling power, and the least gelling content increased with increasing temperature and time. Starch treated at 45 °C for 30 min had the lowest syneresis among all treatments. Thermal-ultrasound treatment at 25 °C and 65 °C for 60 min caused increasing paste clarity. Microscopic observations demonstrated that the starch granules were agglomerated at 65 °C. Although the crystallinity of samples decreased from 35.42% to 8.94%, the storage modulus was more than the loss modulus during the frequency sweep test. Pasting properties showed that pasting temperatures shifted to higher values after treatment. Nonetheless, the maximum viscosity decreased, and the final viscosity of the treated samples demonstrated that short-term retrogradation could deteriorate. Results showed that thermal-ultrasound is a viable technique for starch modification compared to conventional thermal and ultrasound treatments.

A research note: Effect of Hofmeister salts on meat iridescence in cooked pork

The effect of Hofmeister salts (NaCl, NaSCN, Na2SO4, KCl, LiCl, CaCl2) on surface iridescence in cooked pork was investigated. Strongest iridescence occurred in samples treated with NaSCN, NaCl and KCl. Control samples and LiCl, CaCl2 and Na2SO4 treatments showed weaker iridescence. However, differences between KCl and LiCl, CaCl2 and Na2SO4 were not statistically significant (p > 0.05). Nevertheless, a tendency of chaotropic salts (NaSCN, NaCl, KCl) to cause stronger iridescence was noted that might be explained with a more effective solubilization of myofibrillar proteins (MPs), reducing incoherent scattering from the myofibrils and thus enhancing multilayer interference.

Microencapsulation of Brazilian Cherokee blackberry extract by freeze-drying using maltodextrin, gum Arabic, and pectin as carrier materials

There are many blackberry cultivars in Brazil; however, the characteristics and applications of the Cherokee cultivar have not yet been widely studied. For this reason, this research investigated the behaviour of maltodextrin (MD), gum Arabic (GA), and pectin (PEC), as carriers combined in different proportions (20% MD, 15% MD + 5% GA, 15% MD + 5% PEC), on encapsulation of Cherokee blackberry pulp extract obtained by freeze-drying. The results of moisture content (2.73-3.36%), water activity (aw) (0.11–0.15), solubility (52.40–54.11%), hygroscopicity (17.59–21.11%), colour (hue 0.24–0.32), retention of anthocyanins (51.55–60.53%), total phenolic compounds (39.72–70.73 mg GAE/100g), antioxidant activity at 25 mg/mL (77.89–80.02%), IC50 (12.26–14.53), simulated in vitro digestion and morphology were discussed. Concerning morphology, blackberry powders had irregular structures and amorphous structures. Comparatively, the best results were obtained for MD-GA. MD-GA presented the highest content of phenolic compounds (70.73 ± 1.84 mg GAE/100g) and antioxidant activity (80.02%), as well as the lowest IC50 value (12.26). In general, all powders showed an increase in phenolic compounds during in vitro digestion, because of the pH conditions and digestive enzymes present in the simulated digestive fluid. This result shows that the wall material provides protection, since the blackberry rich extract (RE) showed degradation of phenolic compounds in in vitro digestion. In this sense, freeze-drying is a suitable technique for the encapsulation of Cherokee blackberry pulp extract.

Optimization of fermentation conditions in Barbari bread based on mixed whole flour (barley and sprouted wheat) and sourdough

The purpose of this study was to use a mixture of whole wheat–barley flour mixture in the preparation of traditional Iranian bread (Barbari) in the optimum condition of fermentation to benefit from all available nutrients. In this study, bread parameters such as specific volume, porosity, textural characteristics, zinc, iron, phytic acid and organoleptic properties were investigated. In this research, different percentages of sourdough (15–30%) and fermentation time (30 – 120 min) were applied. Results showed that the phytic acid content significantly decreased ( p < 0.05) (0.23 – 0.14) by increasing sourdough and fermentation time, which result in increasing in zinc (17.49 – 22.89%) and iron (36.44 – 45.32%) content. Both the sourdough content and fermentation time parameters had a significant effect ( p < 0.05) on the better porosity (9.05 – 13.50%) and overall acceptability of bread (2.15 – 3.85). The hardness, gumminess, chewiness, porosity, phytic acid and overall acceptance parameters were used to optimize the fermentation conditions of Barbari bread by response surface methodology using a central composite design. Optimal conditions for the production of Barbari bread were 29.53% sourdough and 120 min fermentation time. Under optimal conditions, the overall acceptance, hardness, porosity, chewability, gumminess and phytic acid were 3.84, 60.81 N, 14.09%, 302.01 N/mm, 41.37 N and 0.15%, respectively.

Effects of superheated steam processing on the physicochemical properties of sea rice bran

Sea rice bran powder is a new type of instant food additive. Currently, its solubility is low, and its flavor is not pleasant. Superheated steam cooking is a promising treatment in cellulose-rich substances, which essentially improves quality. To gain better sea rice bran powder, physicochemical properties of sea rice bran were investigated using 100 °C, 110 °C, 120 °C, and 130 °C superheated steam treatments for 10, 20, 30, and 40 min. After the treatment, these samples were cooled down, dried, and milled to assess sea rice bran powder's product qualities. Profiles of odor, taste, aroma, and aliphatic acids were determined using e-nose, e-tongue, and gas chromatography–mass spectroscopy. Results revealed that superheated steam brought new profiles of odors and tastes for consumers. Superheated steam treatment was found to decrease swelling capacity. Methane (2,2,4,6,6-pentamethyl, heptane) was seen as a significant odor component, whereas umami and bitterness were considered considerable taste components. Superheated steam treatment retained higher content of aliphatic acids: saturated fatty acids 218–204 mg/100 g and unsaturated fatty acids 830–781 mg/100 g. This study discovered that superheated steam is suitable for processing rice bran as food ingredients; 100 °C-120°C and 10-30 min could be suggested for suitable cooking sea rice bran.

Development of technology for producing wheat bread enriched with soy ingredient

Nutritional supplements produced from soy and being rich in protein, fat and many other valuable substances have become a promising source of fortification of bakery products. This study aimed to develop a technology for producing wheat bread enriched with a protein-vitamin-mineral ingredient (PVMI) obtained from germinated soybeans. When kneading the dough, PVMI was added together with wheat flour and other dry components. Mathematical modeling of the wheat bread sensory evaluation showed the optimal content of PVMI in the recipe was 20% of the weight of wheat flour. As a result of the correlation-regression analysis, the most rational production characteristics for obtaining bread enriched with BVMI have been established. The amount of protein in the bread sample increased by 71.9%, dietary fiber - by 40.9%, vitamin E - by 34.7%, vitamin B1 - by 190%, vitamin B2 - by 80%, choline - by 186%. The fat quantity was 4.1 times more. At the same time, the total carbohydrate content decreased by 18.1% compared to the control sample. The improved chemical composition makes it possible to classify wheat bread with PVMI as an enriched food product.