THE PREDICTION METHOD FOR RESPONSE SPECTRA OF EARTHQUAKE GROUND MOTION BASED ON CHARACTERIZED GREEN'S FUNCTION

ABSTRACT For earthquake-resistant design purposes, ground-motion intensity is usually characterized using response spectra. The amplitude of response spectral ordinates of horizontal components varies significantly with changes in orientation. This change in intensity with orientation is commonly known as ground-motion directionality. Although this directionality has been attributed to several factors, such as topographic irregularities, near-fault effects, and local geologic heterogeneities, the mechanism behind this phenomenon is still not well understood. This work studies the directionality characteristics of earthquake ground-motion intensity using synthetic ground motions and compares their directionality to that of recorded ground motions. The two principal components of horizontal acceleration are sampled independently using a stochastic model based on finite-duration time-modulated filtered Gaussian white-noise processes. By using the same stochastic process to sample both horizontal components of motion, the variance of horizontal ground acceleration has negligible orientation dependence. However, these simulations’ response spectral ordinates present directionality levels comparable to those found in real ground motions. It is shown that the directionality of the simulated ground motions changes for each realization of the stochastic process and is a consequence of the duration being finite. Simulated ground motions also present similar directionality trends to recorded earthquake ground motions, such as the increase of average directionality with increasing period of vibration and decrease with increasing significant duration. These results suggest that most of the orientation dependence of horizontal response spectra is primarily explained by the finite significant duration of earthquake ground motion causing inherent randomness in response spectra, rather than by some physical mechanism causing polarization of shaking.

Download Full-text

Reproducing the Spatial Characteristics of High-Frequency Ground Motions for the 1850 M 7.5 Xichang Earthquake

Seismological Research Letters ◽

10.1785/0220210076 ◽

2021 ◽

Author(s):

Zongchao Li ◽

Jize Sun ◽

Lihua Fang ◽

Xueliang Chen ◽

Mengtan Gao ◽

...

Keyword(s):

Green’S Function ◽

Ground Motion ◽

Green's Function ◽

Function Method ◽

Ground Motions ◽

Empirical Green’S Function ◽

Green’S Function Method ◽

Spatial Characteristics ◽

Meizoseismal Area ◽

Empirical Green's Function

Abstract Reproducing the spatial characteristics of large historical earthquakes and predicting the strong ground motions of future destructive large earthquakes through actual small earthquakes have high-practical value. The empirical Green’s function method is a numerical simulation method that can impart real seismic information in synthetic ground motions. In this article, we use data from the 2018 M 5.1 Xichang earthquake to reproduce the ground-motion characteristics of the 1850 M 7.5 Xichang earthquake using the empirical Green’s function method. The uncertainties of the parameters, such as the number, area, and locations of asperities, are considered. The synthetic time histories, peak ground accelerations (PGAs), and response spectra are obtained through simulation. The main results are as follows. (1) The synthetic Xichang earthquake (such as the ground-motion intensity and attenuation characteristic of the PGA) matches well with the M 8.0 Wenchuan earthquake and M 7.3 Jiji earthquake. When the number of asperities is 1 or 2, the PGA characteristics of the Xichang earthquake match well not only with the Next Generation Attenuation-West2 (2014) ground-motion model in the range of 100 km but also with the seismic ground-motion parameter zonation map of China in the range of 20–100 km. (2) The prediction results based on the asperity source model are relatively reliable in the range of 20–100 km. The one-asperity and two-asperity models of the Xichang earthquake match better than the three-asperity and four-asperity models. (3) We can speculate that when the M 7.5 earthquake struck the Xichang area, the damage was relatively strong. The PGA may have exceeded 1.0g in the meizoseismal area, and the seismic intensity in the meizoseismal area may have reached or exceeded a degree of X–XI. Therefore, the synthesized M 7.5 Xichang earthquake has the strength characteristics of a large destructive earthquake.

Download Full-text