The material ratio of roadside backfill body based on spatiotemporal law of ground pressure: a case study of Xingtai Mine, China

The material ratio of the roadside backfill body in gob-side entry retaining determines its mechanical properties, which plays an important role in the supporting effect of the roadway surrounding rock. In this paper, a similar material modeling is used to verify the spatiotemporal law of the ground pressure in the engineering case of dense solid backfilling mining in Xingtai Mine, China. Based on that law, the theoretical requirements for the bearing performance of the roadside backfill body are proposed. Finally, a material ratio that meets the theoretical requirements is obtained by compression test, and the deformation and failure characteristics of the backfill body with this ratio are analyzed. The results show that the maximum pressure of the backfill body measured in Xingtai Mine is 5.5 MPa, which is about 40 m away from the coal face, after 40m, the pressure of the backfill body will not increase anymore. The similar simulation test also proved that the ground pressure behind the coal face increases gradually and tends to be stable during the backfilling process, which shows certain spatiotemporal characteristics. Through the proportioning experiment, it is determined that the optimal material ratio of the roadside backfill body is gangue: fly ash: cement = 10:3:1, which meets the theoretical requirement that the strength of the roadside backfill body at any position is not less than the ground pressure at that position. The research results provide a reference for the engineering practice of gob-side entry retaining in dense backfilling mining.