The Development and the Validation of a Novel Dissolution Method of Favipiravir Film-Coated Tablets

The aim of this study was to develop and validate a dissolution test for favipiravir release in a tablet dosage form using ultra-high performance liquid chromatography (UHPLC). The dissolution method was developed by testing the solubility of favipiravir in media with different pH values. The results demonstrated that the best dissolution was achieved in phosphate buffer with a pH of 6.8. The amount of favipiravir that was released was about 100% after 30 min. The UHPLC method presented linearity (R = 1.000) in the concentration range of 0.044–0.44 mg/mL. The recovery parameter that was achieved ranged from 102.5% to 104.2%. The system suitability, repeatability, and intermediate precision RSD% results were found to be 0.36%, 1.99%, and 2.49%, respectively. In addition to these parameters and results, an F-test was performed using the Minitab 18 Statistical Software program for the intermediate precision and repeatability results. The standard and sample solutions were found to be stable for 2 days in their respective dissolution medium. This analytical method was also found to be selective for favipiravir. In conclusion, a simple and feasible dissolution method with a short run time of 2.5 min was developed and validated successfully. The obtained results demonstrated that the dissolution test developed here is adequate for its purpose and can be applied as the dissolution method for favipiravir in film-coated tablets for release analyses.

Development and Validation of RP-HPLC Chromatographic Dissolution Method for the Simultaneous Estimation of Ramipril and Hydrochlorothiazide from Solid Dosage Formulation

The present study describes the dissolution method development and validation of Ramipril and Hydrochlorothiazide in tablet dosage form by HPLC Method. A simple, rapid, selective, reproducible and isocratic reversed-phase high performance liquid chromatographic (RP-HPLC) method has been developed and validated as per ICH guidelines. Analysis was performed on a Thermo, Sunniest C8 (150 mm x 4.6 mm, 5 µm) with the mobile phase consisting of mixing 500 mL of buffer solution and 500 mL of acetonitrile at a flow rate of 1.0mL/min. UV detection was performed at 210nm and the Run time for Ramipril and Hydrochlorothiazide were 10 minutes. The calibration curve was linear (correlation coefficient = 1.000) in the selected range for both analytes. The optimized dissolution conditions include the USP Type 1 (Basket) rotation rate of 100 rpm and 750 mL of 0.1 N Hydrochloric acid as dissolution medium, at 37.0 ± 0.5°C. The method was validated for precision, linearity, specificity, accuracy, limit of quantitation and ruggedness. The system suitability parameters, such as theoretical plate, tailing factor and relative standard deviation (RSD) between six standard replicates were well within the limits. The stability result shows that the drug is stable in the prescribed dissolution medium.