Design and research of dual-wavelength polarization multiplexing multifocal metalens based on superimposed nano-antenna array

In this study, based on the single-layer metasurface structure, a dual-wavelength polarization multiplexing metalens is designed at the communication wavelengths of 1310 nm and 1550 nm, respectively. Using the dual-phase modulation method, a single-wavelength polarization multiplexing metalens is proposed, which can simultaneously control left-handed circularly polarized light (LCP) and right-handed circularly polarized light (RCP). Furthermore, the cross superposition method is used to combine them to achieve the dual-wavelength polarization multiplexing metalens. The results show that the system can achieve polarization multiplexing at the two wavelengths of 1310 nm and 1550 nm, which is consistent with the expected results, and the focusing efficiency reached 61%. With the increase of the numerical aperture, the focusing intensity of the left and right focal points gradually approaches, and the difference between the full width at half maximum of the two focal points also decreases accordingly. It provides a new way for the optical imaging, information detection and the realization of multifunctional ultra-surface devices.

An experimental millimeter wave radio over fiber link with double polarization multiplexing

A novel approach, an optical radio over fiber link with double polarization multiplexing is presented. In the two orthogonal polarizations of the optical beam the contents of information to be transmitted are different doubling the link capacity this way. For experimental verification a millimeter wave radio over fiber link with double polarization multiplexing has been developed. To ensure low cross polarization an incoherent approach is used. A high quality signal transmission is achieved by a proper procedure providing high polarization extinction ratio. In the experimental investigations different bit rates and fiber lengths are used. A signal with 12 Gbit/s bit rate is transmitted over a 25 km long link with about 1.10–8 bit error rate. That result is much better than the already published data measured on experimental links.