Experimental study of infrared – assisted heat pump drying of lime slices

This paper describes the experimental drying of lime slices using an infrared –assisted heat pump dryer. Experiments were carried out on a heat pump dryer model with a capacity of 1 HP integrated with 2000 W infrared radiator whose power can be varied from 0% to 100%. Experiments have been performed with the drying capacity of 1,2 kg/batch and the drying air velocity of 1,2 m/s. Three evaluations were considered: the effect of material thickness on drying time; the effect of temperature in drying chamber and intensity of infrared radiation on drying time, power consumption and product quality. The results showed that the drying process having 3 mm thickness of lime slices, the temperature in the drying chamber of 42,5¸45oC and the radiation intensity of 110¸300W/m2 was the good effective drying range. In addition, the study formulated a linear regression equation for the drying time relationship with drying chamber temperature and infrared radiation intensity. This mathematical model can be used as reference to determine actual drying time as well as a helpful tool for designing infrared - heat pump dryer.

Inverse Contrast in Non-Destructive Materials Research by Using Active Thermography

Background: it is undesirable for defects to occur in building partitions and units. There is a need to develop and improve research techniques for locating such defects, especially non-destructive techniques for active thermography. The aim of the experiment was to explore the possibility of using active thermography for testing large-sized building units (with high heat capacity) in order to locate material inclusions. Methods: as part of the experiment, two building partition models—one made of gypsum board (GB) and another made of oriented strand board (OSB)—were built. Three material inclusions (styrofoam, granite, and steel), considerably differing in their thermal parameters, were placed in each of the partitions. A 7.2 kW infrared radiator was used for thermally exciting (heating) the investigated element for 30 min. The distribution of the temperature field was studied on both sides of the partition for a few hours. Results: using the proposed investigative method, one can detect defects in building partitions under at least 22 mm of thick cladding. At a later cooling down phase, inverse temperature contrasts were found to occur—the defects, which at the beginning of cooling down were visible as warmer areas, at a later phase of cooling down are perceived as cooler areas, and vice versa (on the same front surface). In the transmission mode, the defects are always visible as areas warmer than defect-free areas. Moreover, a quantitative (defect location depth) analysis with an accuracy of up to 10% was carried out using the Echo Defect Shape method. Conclusions: active thermography can be used in construction for non-destructive materials testing. When the recording of thermograms is conducted for an appropriate length of time, inverse contrasts can be observed (on the same front surface).