High Sensitivity Fiber Gas Pressure Sensor with Two Separated Fabry–Pérot Interferometers Based on the Vernier Effect

A high sensitivity optical fiber gas pressure sensor based on paralleled Fabry–Pérot interferometers (FPIs) was demonstrated. One micro-cavity FPI is used as a reference FPI (FPI-1) to generate a Vernier effect and the other FPI (FPI-2) is used as a sensing tip. Both FPIs are connected by a 3-dB coupler to form a paralleled structure. The FPI-1 was fabricated by fusion splicing a piece of hollow core fiber (HCF) between two sections of single-mode fibers (SMF), whereas FPI-2 was formed by fusion splicing a section of HCF between SMF and a piece of HCF with a slightly smaller inner diameter for sensing pressure. The gas pressure sensitivity was amplified from 4 nm/MPa of single FPI to 45.76 nm/MPa of paralleled FPIs with an amplification factor of 11.44 and a linearity of 99.9%. Compared with the traditional fiber gas pressure sensors, the proposed sensor showed great advantages in sensitivity, mechanical strength, cost, and temperature influence resistant, which has potential in adverse-circumstance gas pressure sensing.

Numerical analysis of the elastic-plastic behavior of a tubular structure in FGM under pressure and defect presence

Given the field of application and the many advantages, the use of FGM (Functionally Graded Materials) materials has recently been extended in several components and more particularly in cylindrical structures, which have been the subject of several recent studies. Our work aims to use the finite element method to analyze a cylindrical structure in FGM with properties gradated in the direction of the radius (Thickness) solicited purely in internal pressure by the implementation of a UMAT subroutine in the calculation code ABAQUS. The elasto-plastic behavior of the FGM is described by the flow theory represented by the equivalent stress of Von Mises and an incremental hardening variable. The TTO model (Tamura-Tomota-Ozawa) was used only to determine the elastic-plastic properties of the FGM material. The radial, tangential and axial stresses according to the thickness were evaluated in the first part of our work. In the second part, these stresses are evaluated under the same conditions but with the presence of a micro-cavity. The results obtained show clearly that these stresses are in direct relation not only with the thickness and properties of the FGM tube but also with the presence of the cavity.

Controllable optical bistability based on rotation in semiconductor micro-cavity

In this paper, we discuss a possibility to realize the optical bistability in a rotating semiconductor micro-cavity system. To study the mean cavity photon number profile, we have obtained stationary solution by solving Heisenberg–Langevin equations of motion. In a rotating semiconductor micro-cavity system, bistability is observed when the cavity is driven externally in one direction but not the other direction. The bistable behavior is possible for strong coupling regime, and this can be controlled by hopping strength, decay rates and pump power. The photon profile also shows tunable zero intensity window. The system may be useful to design all-optical switch and optical flip–flop i.e., optical memory element, which would be faster in applications and compact in size.

Modulation and optimization of terahertz absorption in micro-cavity quantum well structures by graphene grating

Metal-insulator-metal (MIM)-based plasmonic microcavity has attracted widespread interest due to its ability in manipulating and concentrating photons on the sub-wavelength scale. However, noble metals suffer from large intrinsic loss and lack active tunability. Here, a micro-cavity structure of quantum well sandwiched between periodic top contact of graphene grating and bottom contact graphene was proposed. Graphene plasmons provide a suitable alternative for metal plasmons and provide the advantage of being highly tunable by electrostatic gating. Effect of changes in both graphene physical and device structural parameters on optimized absorption performance was systematically analyzed through the calculation of reflectivity curves of incident light. Our results indicate that intersubband absorption of device can be improved by adjusting parameters of both graphene material and device structure. Furthermore, cavity resonant mode excited by surface plasmon polariton can be tuned to response frequency of quantum well under optimized parameters. Intersubband absorption is almost 1.5 times higher than that of a micro-cavity structure that uses metal grating.

High-performance narrow spectrum green phosphorescent top-emitting organic light-emitting devices with external quantum efficiency up to 38%

In this work, we have experimentally demonstrated the efficacy of micro-cavity effect in realizing high-performance top-emitting organic light-emitting diodes (TEOLEDs). By optimizing the thickness of top Yb/Ag electrode and cavity length, highly efficient green TEOLED with external quantum efficiency as high as 38% was achieved. A strong dependence of electroluminescent (EL) performances and spectrum on cavity length was observed, and there was also a significant angle dependence of EL spectrum. Ultimately, ultra-high current efficiency up to 161.17 cd/A (3.2 V) was obtained by the device with emission peak at 552 nm, which is 35 nm longer than the intrinsic emission peak (517 nm) of utilized green emitter. Interestingly, this device displayed narrow emission with full-width at half-maximum (FWHM) of less than 20 nm, which was obtained by increasing the Ag layer thickness.