Annual bank and point bar morphodynamics of a meandering river determined by high-accuracy multitemporal laser scanning and flow data

2014 ◽  
Vol 50 (7) ◽  
pp. 5532-5559 ◽  
Author(s):  
E. Lotsari ◽  
M. Vaaja ◽  
C. Flener ◽  
H. Kaartinen ◽  
A. Kukko ◽  
...  
Keyword(s):  
Laser Scanning ◽  
High Accuracy ◽  
Flow Data ◽  
Point Bar ◽  
Meandering River

Application Of BIM-Technology In The Restoration Of Buildings

2020 ◽  
pp. 42-48
Keyword(s):  
Chinese Communist Party ◽  
Laser Scanning ◽  
High Accuracy ◽  
Information Environment ◽  
Information Modeling ◽  
Structural Scheme ◽  
Traditional Design ◽  
Information Interaction ◽  
Heritage Buildings ◽  
Effective Organization

The paper describes the main trends in the development of BIM technologies in the field of restoration and reconstruction of historical and cultural heritage buildings. The practical part of the paper presents the experience in using information modeling technologies when restoring the building, where the VI Congress of the Chinese Communist Party in Moscow took place. The use of laser scanning technologies made it possible to reproduce with high accuracy in the information model the original appearance of the building using Autodesk RevitR software. It is shown, how the use of information modeling technologies affects the duration of restoration process, taking into account the calculation of the structural scheme and bearing structures of the building, ensuring the identity of the decoration and the effective organization of electromechanical installation. Operating in a single BIM information environment makes it possible to continuously obtain reliable information on the project, which provides more effective information interaction and communication of participants compared to using traditional design methods.

Ultra-Small Laser Scanning Module with High Accuracy Alignment

2009 ◽  
Vol 129 (12) ◽  
pp. 433-438 ◽  
Author(s):  
Shinji Yoshihara ◽  
Junji Ohara ◽  
Katsunori Abe ◽  
Yukihiro Takeuchi ◽  
Nobuaki Kawahara
Keyword(s):  
Laser Scanning ◽  
High Accuracy

scholarly journals Modeling of dense well block point bar architecture based on geological vector information: A case study of the third member of Quantou Formation in Songliao Basin

2021 ◽  
Vol 13 (1) ◽  
pp. 39-48
Author(s):  
Chao Luo ◽  
Ailin Jia ◽  
Jianlin Guo ◽  
Wei Liu ◽  
Nanxin Yin ◽  
...  
Keyword(s):  
River Sediments ◽  
Three Dimensional ◽  
Songliao Basin ◽  
Point Bar ◽  
Meandering River ◽  
Architecture Model ◽  
The Third ◽  
Continuous Convergence ◽  
Vector Information ◽  
Architecture Modeling

Abstract Although stochastic modeling methods can achieve multiple implementations of sedimentary microfacies model in dense well blocks, it is difficult to realize continuous convergence of well spacing. Taking the small high-sinuosity meandering river sediments of the third member of Quantou Formation in Songliao Basin as an example, a deterministic modeling method based on geological vector information was explored in this article. Quantitative geological characteristics of point bar sediments were analyzed by field outcrops, modern sediments, and dense well block anatomy. The lateral extension distance, length, and spacing parameters of the point bar were used to quantitatively characterize the thickness, dip angle, and frequency of the lateral layer. In addition, the three-dimensional architecture modeling of the point bar was carried out in the study. The established three-dimensional architecture model of well X24-1 had continuous convergence near all wells, which conformed to the geological knowledge of small high-sinuosity meandering river, and verified the reliability of this method in the process of geological modeling in dense well blocks.

scholarly journals Lithology distribution model of point-bar dominated meandering river deposits for uncertainty quantification

2013 ◽  
Vol 119 (8) ◽  
pp. IX-X
Author(s):  
Takashi Tsuji ◽  
Osamu Takano ◽  
Satoko Watanabe ◽  
Kinya Okada ◽  
Koji Kashihara ◽  
...  
Keyword(s):  
Uncertainty Quantification ◽  
Distribution Model ◽  
Point Bar ◽  
Meandering River ◽  
River Deposits

scholarly journals USING MOBILE LASER SCANNING DATA FOR FEATURES EXTRACTION OF HIGH ACCURACY DRIVING MAPS

2016 ◽  
Vol XLI-B3 ◽  
pp. 433-439 ◽  
Author(s):  
Bisheng Yang ◽  
Yuan Liu ◽  
Fuxun Liang ◽  
Zhen Dong
Keyword(s):  
Laser Scanning ◽  
Human Error ◽  
Traffic Accidents ◽  
Three Dimensional ◽  
Point Clouds ◽  
High Accuracy ◽  
3D Point Clouds ◽  
Assistant Systems ◽  
Novel Method ◽  
High Flexibility

High Accuracy Driving Maps (HADMs) are the core component of Intelligent Drive Assistant Systems (IDAS), which can effectively reduce the traffic accidents due to human error and provide more comfortable driving experiences. Vehicle-based mobile laser scanning (MLS) systems provide an efficient solution to rapidly capture three-dimensional (3D) point clouds of road environments with high flexibility and precision. This paper proposes a novel method to extract road features (e.g., road surfaces, road boundaries, road markings, buildings, guardrails, street lamps, traffic signs, roadside-trees, power lines, vehicles and so on) for HADMs in highway environment. Quantitative evaluations show that the proposed algorithm attains an average precision and recall in terms of 90.6% and 91.2% in extracting road features. Results demonstrate the efficiencies and feasibilities of the proposed method for extraction of road features for HADMs.

scholarly journals Topographical change caused by moderate and small floods in a gravel bed ephemeral river – a depth-averaged morphodynamic simulation approach

2018 ◽  
Vol 6 (1) ◽  
pp. 163-185 ◽  
Author(s):  
Eliisa S. Lotsari ◽  
Mikel Calle ◽  
Gerardo Benito ◽  
Antero Kukko ◽  
Harri Kaartinen ◽  
...  
Keyword(s):  
Laser Scanning ◽  
River Channel ◽  
Erosion And Deposition ◽  
Channel Changes ◽  
Meandering River ◽  
Gravel Bed ◽  
Field Evidence ◽  
Ephemeral Rivers ◽  
Bedload Sediment ◽  
Low Magnitude

Abstract. In ephemeral rivers, channel morphology represents a snapshot at the end of a succession of geomorphic changes caused by floods. In most cases, the channel shape and bedform migration during different phases of a flood hydrograph cannot be identified from field evidence. This paper analyses the timing of riverbed erosion and deposition of a gravel bed ephemeral river channel (Rambla de la Viuda, Spain) during consecutive and moderate- (March 2013) and low-magnitude (May 2013) discharge events, by applying a morphodynamic model (Delft3D) calibrated with pre- and post-event surveys by RTK-GPS points and mobile laser scanning. The study reach is mainly depositional and all bedload sediment supplied from adjacent upstream areas is trapped in the study segment forming gravel lobes. Therefore, estimates of total bedload sediment mass balance can be obtained from pre- and post-field survey for each flood event. The spatially varying grain size data and transport equations were the most important factors for model calibration, in addition to flow discharge. The channel acted as a braided channel during the lower flows of the two discharge events, but when bars were submerged in the high discharges of May 2013, the high fluid forces followed a meandering river planform. The model results showed that erosion and deposition were in total greater during the long-lasting receding phase than during the rising phase of the flood hydrographs. In the case of the moderate-magnitude discharge event, deposition and erosion peaks were predicted to occur at the beginning of the hydrograph, whereas deposition dominated throughout the event. Conversely, the low-magnitude discharge event only experienced the peak of channel changes after the discharge peak. Thus, both type of discharge events highlight the importance of receding phase for this type of gravel bed ephemeral river channel.

scholarly journals Interpretasi Lingkungan Pengendapan Formasi Batuan Menggunakan Analisis Elektrofasies di Lokasi Tapak Puspiptek Serpong

EKSPLORIUM ◽  
2017 ◽  
Vol 38 (1) ◽  
pp. 29
Author(s):  
Heri Syaeful ◽  
Adi Gunawan Muhammad
Keyword(s):  
Depositional Environment ◽  
Gamma Ray ◽  
River System ◽  
Shape Variation ◽  
Point Bar ◽  
Meandering River ◽  
The North ◽  
Rock Formations ◽  
Subsurface Material ◽  
Crevasse Splay

ABSTRAKKegiatan karakterisasi material bawah permukaan penyusun pondasi tapak merupakan bagian dari studi tapak instalasi nuklir. Karakterisasi dilakukan dengan berbagai metode, diantaranya pemahaman tentang sistem pengendapan formasi batuan. Sebagai bagian dari metode interpretasi lingkungan pengendapan, analisis pemodelan fasies berdasarkan elektrofasies memberikan informasi yang cepat mengenai sistem pengendapan suatu formasi batuan. Metodologi yang digunakan adalah dengan interpretrasi log sinar gamma (log GR) menggunakan korelasi relatif antara variasi bentuk log dan fasies sedimentasi. Berdasarkan analisis diketahui Formasi Bojongmanik terbentuk pada lingkungan marine-lagoonal dengan pengaruh gelombang sangat rendah. Log GR yang menunjukan bentuk funnel, bergerigi dan simetris, mengindikasikan fasies shoreface, lagoon, dan tidal point bar. Arah sedimentasi, cekungan, dan suplai pada pengendapan sedimen Formasi Bojongmanik diinterpretasikan relatif ke utara. Formasi Serpong diendapkan pada sistem sungai bermeander dan tersusun atas endapan point bar, crevasse splay dan floodplain. Hasil analisis ini diharapkan dapat menjadi panduan dalam analisis lanjutan terkait karakterisasi material pondasi. ABSTRACTThe activity of subsurface material composing site foundation characterization is part of nuclear installation siting study. Characterization conducted by several methods, such as understanding the depositional environment of rock formations. As a segment of depositional environment interpretation method, facies model analysis based on electrofacies provides quicker information on depositional system of rock formation. Methodology applied is gamma ray log (log GR) interpretation using relative correlation between log shape variation and sedimentation facies. Based on the analysis, Bojongmanik Formation was deposited on marine-lagoonal environment with very low wave influence. Log GR that shows shape of funnel, serrated, and symmetry, indicate shoreface, lagoon, and tidal point bar facies. The direction of sedimentation, basin, and supply of Bojongmanik Formation interpreted relatively to the north. Serpong Formation deposited on meandering river system, and composed of point bar deposit, crevasse splay, and floodplain deposit. The result of analysis is expected to be guidance in further analysis related to the characterization of foundation materials.

scholarly journals River response to climate and sea level changes during the Late Saalian/Early Eemian in northern Poland – a case study of meandering river deposits in the Chłapowo cliff section

Geologos ◽  
2016 ◽  
Vol 22 (1) ◽  
pp. 1-14
Author(s):  
Damian Moskalewicz ◽  
Robert J. Sokołowski ◽  
Stanisław Fedorowicz
Keyword(s):  
Sea Level ◽  
River Sediments ◽  
Luminescence Dating ◽  
Heavy Minerals ◽  
Sea Level Changes ◽  
Point Bar ◽  
Meandering River ◽  
Base Level ◽  
River Deposits ◽  
And Sea Level

Abstract Fluvial sediments in the Chłapowo cliff section were studied in order to reconstruct their palaeoflow conditions and stratigraphical position. Lithofacies, textural and palaeohydraulic analyses as well as luminescence dating were performed so as to achieve the aim of study. Sedimentary successions were identified as a record of point bar cycles. The fluvial environment probably functioned during the latest Saalian, shortly after the retreat of the Scandinavian Ice Sheet. Discharge outflow was directed to the northwest. The river used the older fluvioglacial valley and probably was directly connected to the Eem Sea. Good preservation and strong aggradation of point-bar cycles were related to a rapid relative base level rise. The meandering river sediments recognised showed responses to climate and sea level changes as illustrated by stratigraphical, morphological and sedimentological features of the strata described. The present study also revealed several insights into proper interpretation of meandering fluvial successions, in which the most important were: specific lithofacies assemblage of GSt (St, Sp) → Sl → SFrc → Fm (SFr) and related architectural elements: channel/sandy bedforms CH/SB → lateral accretion deposits LA → floodplain fines with crevasse splays FF (CS); upward-fining grain size and decreasing content of denser heavy minerals; estimated low-energy flow regime with a mean depth of 1.6–3.3 m, a Froude number of 0.2–0.4 and a sinuosity of 1.5.

Sign in / Sign up

Export Citation Format

Share Document