scholarly journals Cyclic tests of four two-story narrow steel plate shear walls. Part 2: experimental results and design implications

2009 ◽  
pp. n/a-n/a ◽  
Author(s):  
Chao-Hsien Li ◽  
Keh-Chyuan Tsai ◽  
Chih-Han Lin ◽  
Pei-Ching Chen
Keyword(s):  
Steel Plate ◽  
Shear Walls ◽  
Experimental Results ◽  
Cyclic Tests ◽  
Steel Plate Shear Walls

scholarly journals Cyclic tests on corrugated steel plate shear walls with openings in modularized-constructions

2017 ◽  
Vol 138 ◽  
pp. 675-691 ◽  
Author(s):  
Yang Ding ◽  
En-Feng Deng ◽  
Liang Zong ◽  
Xiao-Meng Dai ◽  
Ni Lou ◽  
...  
Keyword(s):  
Steel Plate ◽  
Shear Walls ◽  
Cyclic Tests ◽  
Steel Plate Shear Walls

scholarly journals Experimental/Numerical Evaluation of Steel Trapezoidal Corrugated Infill Panels with an Opening

2021 ◽  
Vol 11 (7) ◽  
pp. 3275
Author(s):  
Majid Yaseri Gilvaee ◽  
Massood Mofid
Keyword(s):  
Energy Dissipation ◽  
Ultimate Strength ◽  
Steel Plate ◽  
Shear Walls ◽  
Experimental Results ◽  
Structural Performance ◽  
Initial Stiffness ◽  
Infill Panels ◽  
Energy Dissipation Capacity ◽  
Ductility Ratio

This paper investigates the influence of an opening in the infill steel plate on the behavior of steel trapezoidal corrugated infill panels. Two specimens of steel trapezoidal corrugated shear walls were constructed and tested under cyclic loading. One specimen had a single rectangular opening, while the other one had two rectangular openings. In addition, the percentage of opening in both specimens was 18%. The initial stiffness, ultimate strength, ductility ratio and energy dissipation capacity of the two tested specimens are compared to a specimen without opening. The experimental results indicate that the existence of an opening has the greatest effect on the initial stiffness of the corrugated steel infill panels. In addition, the experimental results reveal that the structural performance of the specimen with two openings is improved in some areas compared to the specimen with one opening. To that end, the energy dissipation capacity of the specimen with two openings is obtained larger than the specimen with one opening. Furthermore, a number of numerical analyses were performed. The numerical results show that with increasing the thickness of the infill plate or using stiffeners around the opening, the ultimate strength of a corrugated steel infill panel with an opening can be equal to or even more than the ultimate strength of that panel without an opening.

scholarly journals Experimental Investigation of Steel Plate Shear Walls under Shear-Compression Interaction

2019 ◽  
Vol 2019 ◽  
pp. 1-11
Author(s):  
Yang Lv ◽  
Ling Li ◽  
Di Wu ◽  
Bo Zhong ◽  
Yu Chen ◽  
...  
Keyword(s):  
Stress Distribution ◽  
Steel Plate ◽  
Axial Stress ◽  
Shear Walls ◽  
Shear Capacity ◽  
Steel Plate Shear Walls ◽  
Steel Plate Shear Wall ◽  
Gravity Load ◽  
Moment Resisting ◽  
Axial Stress Distribution

Four scaled one-storey single-bay steel plate shear wall (SPSW) specimens with unstiffened panels were tested to determine their behaviour under cyclic loadings. The shear walls had moment-resisting beam-to-column connections. Four different vertical loads, i.e., 300 kN, 600 kN, 900 kN, and 1200 kN, representing the gravity load of the upper storeys were applied at the top of the boundary columns through a force distribution beam. A horizontal cyclic load was then applied at the top of the specimens. The specimen behaviour, envelope curves, axial stress distribution of the infill steel plate, and shear capacity were analyzed. The axial stress distribution and envelope curves were compared with the values predicted using an analytical model available in the literature.

Sign in / Sign up

Export Citation Format

Share Document