scholarly journals Experimental/Numerical Evaluation of Steel Trapezoidal Corrugated Infill Panels with an Opening

2021 ◽  
Vol 11 (7) ◽  
pp. 3275
Author(s):  
Majid Yaseri Gilvaee ◽  
Massood Mofid
Keyword(s):  
Energy Dissipation ◽  
Ultimate Strength ◽  
Steel Plate ◽  
Shear Walls ◽  
Experimental Results ◽  
Structural Performance ◽  
Initial Stiffness ◽  
Infill Panels ◽  
Energy Dissipation Capacity ◽  
Ductility Ratio

This paper investigates the influence of an opening in the infill steel plate on the behavior of steel trapezoidal corrugated infill panels. Two specimens of steel trapezoidal corrugated shear walls were constructed and tested under cyclic loading. One specimen had a single rectangular opening, while the other one had two rectangular openings. In addition, the percentage of opening in both specimens was 18%. The initial stiffness, ultimate strength, ductility ratio and energy dissipation capacity of the two tested specimens are compared to a specimen without opening. The experimental results indicate that the existence of an opening has the greatest effect on the initial stiffness of the corrugated steel infill panels. In addition, the experimental results reveal that the structural performance of the specimen with two openings is improved in some areas compared to the specimen with one opening. To that end, the energy dissipation capacity of the specimen with two openings is obtained larger than the specimen with one opening. Furthermore, a number of numerical analyses were performed. The numerical results show that with increasing the thickness of the infill plate or using stiffeners around the opening, the ultimate strength of a corrugated steel infill panel with an opening can be equal to or even more than the ultimate strength of that panel without an opening.

Experimental Study on Seismic Behavior of Double-Wall Precast Concrete Shear Wall

2014 ◽  
Vol 919-921 ◽  
pp. 1812-1816 ◽  
Author(s):  
Quan Dong Xiao ◽  
Zheng Xing Guo
Keyword(s):  
Energy Dissipation ◽  
Seismic Behavior ◽  
Failure Modes ◽  
Precast Concrete ◽  
Shear Walls ◽  
Shear Wall ◽  
Initial Stiffness ◽  
Displacement Ductility ◽  
Energy Dissipation Capacity ◽  
Double Wall

To study the seismic behavior of Double-Wall Precast Concrete (DWPC) shear wall, three full scale specimens are tested and compared under low-cyclic reversed loading, including two DWPC shear walls and one normal Cast-In-Situ (CIS) shear wall. By observing their experimental phenomena and failure modes, contrasting their displacement ductility coefficients, hysteretic curves, skeleton curves and energy dissipation capacity, the seismic behavior were synthetically evaluated on aspects of strength, stiffness, ductility and energy dissipation. Compared with CIS specimen, DWPC specimens have higher initial stiffness, increased cracking loads by 43% to 47%, and the ultimate loads increased by 22% to 23%. The displacement ductility ratios also meet the ductility requirements with value of 5. The hysteretic curves of three specimens are plump, and the trend of skeleton curves is basically the same. The DWPC specimens demonstrated a good energy dissipation capacity. All the specimens had shown favorable seismic performance.

scholarly journals Seismic Evaluation of New Steel Infill Panels for Steel Shear Walls

2021 ◽  
Vol 7 (4) ◽  
pp. 633-648
Author(s):  
Ali Joharchi ◽  
Siti Aminah Osman ◽  
Mohd Yazmil Md Yatim ◽  
Mohammad Ansari
Keyword(s):  
Energy Dissipation ◽  
Ultimate Load ◽  
Shear Walls ◽  
Shear Wall ◽  
Cyclic Behavior ◽  
Lower Amount ◽  
Seismic Evaluation ◽  
Steel Plate Shear Wall ◽  
Infill Panels ◽  
Energy Dissipation Capacity

Corrugated Steel Shear Wall (CSSW) is an efficient shear wall system, which has higher energy dissipation capacity, ductility and stiffness when compared to the Steel Plate Shear Wall (SPSW) with flat infill plate. Despite of these advantages, the ultimate load of CSSW is lower than that of SPSW. Various studies conducted to improve the cyclic behavior of CSSW revealed that increasing corrugation angle might enhance energy dissipation capacity and toughness of CSSWs. However, the ultimate load of CSSW was not improved by increasing the corrugation angle. Thus, the current study proposed new corrugated infill panel schemes to improve the ultimate load of CSSWs. To this end, Finite Element (FE) models were established using ABAQUS/Standard and verified with the experimental results from previous researches. The corrugation angle of the proposed plates was found based on a numerical investigation on seven CSSW FE models with the corrugation angle ranges from 30° to 120°. The FE results revealed that the model with the corrugation angle of 120 achieved highest ultimate load, energy dissipation capacity and toughness amongst the CSSW models. In addition, the ultimate loads, energy dissipation capacities and toughness of the proposed infill plates were up to 11.8%, 53.9% and 8.8% respectively higher than those of CSSW model with the corrugation angle of 120°. Furthermore, the proposed infill plates use up to 13.4% lower amount of steel compared to the corrugated plate with the corrugation angle of 120. Doi: 10.28991/cej-2021-03091678 Full Text: PDF

Hysteretic Behavior of Semi-Rigid Composite Steel Frame with Cross-Stiffened Steel Plate Shear Walls

2010 ◽  
Vol 163-167 ◽  
pp. 205-210
Author(s):  
Hong Chao Guo ◽  
Ji Ping Hao ◽  
Feng Li
Keyword(s):  
Energy Dissipation ◽  
Carrying Capacity ◽  
Steel Plate ◽  
Shear Wall ◽  
Load Carrying Capacity ◽  
Steel Plate Shear Wall ◽  
Infill Panels ◽  
Load Carrying ◽  
Energy Dissipation Capacity ◽  
Stiffened Steel

Based on the experiment of a one-third scale, single-span, two-storey semi-rigid composite steel frame model with cross-stiffened steel plate shear wall under lateral cyclic loadings, the interactive effect between the joint stiffness and the cross-stiffened steel plate shear wall, the failure mode and energy dissipation mechanism of the structure system were analyzed, some important parameters were obtained in regard to load-carrying capacity, ductility, stiffness and energy dissipation capacity. The results showed that the specimen exhibited excellent ductility, energy dissipation capacity and great safety margin; the stiffness degradation of the joints was not serious, the requirement of ductility was lowered by setting up infill panels, the cooperative work between the frame and the steel plate shear wall was well; stiffeners improved the force condition of steel panels, increased the stiffness and load-carrying capacity of panels, lightened the pinch of hysteretic loops and reduced the noise and tremor of panels. The failure mode of the structure induced by buckling of stiffeners, local buckling and interactive buckling of infill panels，plastic hinges were formed at the bottom of column and semi-rigid connection, the in-plane deformation of specimen was bending failure. The research provides a basis for engineering application and theoretical analysis of the structural system.

scholarly journals Effect of Different Infill Types and Welding Separation on the Cyclic Behavior of Steel Shear Walls

2021 ◽  
Author(s):  
Osman Shallan ◽  
Hassan M. Maaly ◽  
Mohammed M. Elgiar ◽  
Alaa El-Din Elsisi
Keyword(s):  
Energy Dissipation ◽  
Carrying Capacity ◽  
Seismic Behavior ◽  
Steel Plate ◽  
Shear Wall ◽  
Load Carrying Capacity ◽  
Initial Stiffness ◽  
Steel Plate Shear Wall ◽  
Load Carrying ◽  
Energy Dissipation Capacity

Abstract Currently, the steel plate shear wall (SPSW) is commonly used in high-rise steel buildings as a lateral load resisting system. The SPSW consists of the boundary frame and infill plate. The objectives of this work are to study the effect of same weight different infill plate types, the effect of boundary frame characteristics, and the effect of infill plate weld separation on the seismic behavior of the SPSWs. A numerical method was proposed to have a comprehensive comparison of seismic behaviors of different types of SPSWs, having the same weight. The model was validated by using previously published numerical and experimental works. The study covers unstiffened (USPSW), stiffened (SSPSW), and corrugated steel plate shear wall (CSPSW). Similarly, the effect of boundary frame stiffness and welding separation characteristics between the plate and boundary frame will be studied, and key issues, such as load-carrying capacity, stiffness, and energy-dissipation capacity were discussed deeply. It was found that the SSPSW has better seismic behavior than USPSW and CSPSW. SSPSW has a higher load-carrying capacity than USPSW, and CSPSW by about 14, 24%, respectively. USPSW is more sensitive to the stiffness of the boundary frame than CSPSW. The plate welding separation has a greater impact on the initial stiffness than load-carrying capacity. When plate-column welding separation occurs, the initial stiffness, and the energy dissipation capacity reduces by about 21%, and 14%. Whereas, when the plate-beam separation occurs, the initial stiffness and energy dissipation capacity reduce by about 36%, and 20.5%.

Estimation of Seismic Energy Dissipation for Steel Slit Shear Walls Considering Out-of-Plane Buckling

2021 ◽  
Author(s):  
Yiming Ma ◽  
Liusheng He ◽  
Ming Li
Keyword(s):  
Energy Dissipation ◽  
Shear Walls ◽  
Seismic Energy ◽  
Thickness Ratio ◽  
Design Parameters ◽  
Test Results ◽  
Loading Test ◽  
Aspect Ratios ◽  
Out Of Plane ◽  
Energy Dissipation Capacity

Steel slit shear walls (SSSWs), made by cutting slits in steel plates, are increasingly adopted in seismic design of buildings for energy dissipation. This paper estimates the seismic energy dissipation capacity of SSSWs considering out-of-plane buckling. In the experimental study, three SSSW specimens were designed with different width-thickness ratios and aspect ratios and tested under quasi-static cyclic loading. Test results showed that the width-thickness ratio of the links dominated the occurrence of out-of-plane buckling, which produced pinching in the hysteresis and thus reduced the energy dissipation capacity. Out-of-plane buckling occurred earlier for the links with a larger width-thickness ratio, and vice versa. Refined finite element model was built for the SSSW specimens, and validated by the test results. The concept of average pinching parameter was proposed to quantify the degree of pinching in the hysteresis. Through the parametric analysis, an equation was derived to estimate the average pinching parameter of the SSSWs with different design parameters. A new method for estimating the energy dissipation of the SSSWs considering out-of-plane buckling was proposed, by which the predicted energy dissipation agreed well with the test results.

scholarly journals Development Behavior for Post-Tensioned Self-Centering Steel Connection under Cyclic Loading

2017 ◽  
Vol 3 (3) ◽  
pp. 152-159
Author(s):  
Ahmadreza Torabipour ◽  
M. R. Shiravand
Keyword(s):  
Energy Dissipation ◽  
Numerical Models ◽  
Perfect Match ◽  
High Strength ◽  
Relative Displacement ◽  
Initial Stiffness ◽  
Validation Parameters ◽  
Steel Connection ◽  
Energy Dissipation Capacity ◽  
Post Tensioned

One of the newest steel beam-column joints to replace conventional welded connections, post-tensioned connection steel is with the upper and lower angles. In this connection are high-strength steel strands that parallel beam web and angles between beams and column. Actually high resistance strands and upper and lower angles respectively are provider centralization properties and energy dissipation capacity of the connection. The benefits of post-tensioned steel can be used in connection with the centralization and lack of relative displacement (drift) persistent, stay elastic core components such as connecting beams, columns and fountains connection, appropriate initial stiffness and joint manufacture with materials and traditional skills. . In this study, numerical modelling in Abaqus software, the results of the analysis were compared with the results of laboratory samples and the results showed that the two together are a perfect match. After validation, parameters influential centrist connection then pulled the thick angles in three numerical models were evaluated.  The results show that by increasing the thickness of the angles, increase energy dissipation capacity and ductility connection and the β₁ value does not experience tangible changes with changes in angle thickness.

scholarly journals Effect of Corrugation Angle and Direction on the Performance of Corrugated Steel Plate Shear Walls

2018 ◽  
Vol 4 (11) ◽  
pp. 2667
Author(s):  
Hayder Fadhil ◽  
Amer Ibrahim ◽  
Mohammed Mahmood
Keyword(s):  
Steel Plate ◽  
Low Cost ◽  
Shear Walls ◽  
High Strength ◽  
Shear Wall ◽  
Initial Stiffness ◽  
Construction Time ◽  
Element Analysis ◽  
Steel Plate Shear Wall ◽  
Steel Shear Wall

Corrugated steel plate shear wall (CSPSW) is one of the lateral resistance systems which consists mainly of steel frame (beam and column) with vertical or horizontal corrugated steel plate connected to the frame by weld, bolts or both. This type of steel shear wall characterized by low cost and short construction time with high strength, ductility, initial stiffness and excellent ability to dissipate energy. The aim of this paper is to evaluate the effect of corrugation angle and its direction on the performance of CSPSW under cyclic loading. The Finite element analysis was employed to achieve the research aim. The FE models were validated with experimental data available in the literature. Results reveal that the corrugation angle has a clear influence on initial stiffness, strength, ductility, and energy dissipation of CSPSW. The optimum performance of CSPSW can be obtained with angles of 30o for CSPSW with vertical corrugation and 20o for CSPSW with horizontal corrugation. The use of CSPSW with vertical corrugation provides higher strength, stiffness, and ductility compared to CSPSW with horizontal corrugation. Therefore, it is recommended to use CSPSW with vertical corrugation.

An innovative system of coupled steel plate shear wall with pin FUSE in link beam: Cyclic behavior and energy dissipation

2021 ◽  
pp. 136943322110542
Author(s):  
Mahdi Usefvand ◽  
Ahmad Maleki ◽  
Babak Alinejad
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Energy Dissipation ◽  
Steel Plate ◽  
Shear Walls ◽  
Shear Wall ◽  
High Ductility ◽  
The Finite Element Method ◽  
Steel Plate Shear Walls ◽  
Steel Plate Shear Wall

Coupled steel plate shear wall (C-SPSW) is one of the resisting systems with high ductility and energy absorption capacity. Energy dissipation in the C-SPSW system is accomplished by the bending and shear behavior of the link beams and SPSW. Energy dissipation and floor displacement control occur through link beams at low seismic levels, easily replaced after an earthquake. In this study, an innovative coupled steel plate shear wall with a yielding FUSE is presented. The system uses a high-ductility FUSE pin element instead of a link beam, which has good replaceability after the earthquake. In this study, four models of coupled steel plate shear walls were investigated with I-shaped link beam, I-shaped link beam with reduced beam section (RBS), box-link beam with RBS, and FUSE pin element under cyclic loading. The finite element method was used through ABAQUS software to develop the C-SPSW models. Two test specimens of coupled steel plate shear walls were validated to verify the finite element method results. Comparative results of the hysteresis curves obtained from the finite element analysis with the experimental curves indicated that the finite element model offered a good prediction of the hysteresis behavior of C-SPSW. It is demonstrated in this study that the FUSE pin can improve and increase the strength and energy dissipation of a C-SPSW system by 19% and 20%, respectively.

Sign in / Sign up

Export Citation Format

Share Document