Analysis of Atmospheric Factors affecting wildfires

2021 ◽  
Author(s):  
Yujie Li ◽  
Xiaoqing Gao ◽  
Zhenchao Li ◽  
Junxia Jiang ◽  
Peidu Li
2018 ◽  
Vol 71 ◽  
pp. 00019
Author(s):  
Paulina Kaczor

The study of vertical displacements of hydrotechnical objects, slender constructions, opencast mines or flotation waste reservoirs often requires continuous geodetic monitoring, which in real time defines potential threats resulting from changes in the geometry of the object. In order to ensure high accuracy in determining vertical displacements, a precise robotic tacheometer is used as one of the monitoring sensors. In the case of trigonometric leveling, the quality of measurements is affected not only by the accuracy of the instrument, but also by the centre through which the laser beam emitted by it passes. The radius emitted by the tacheometer due to the layered structure of the atmosphere is deflected, and the angle that it creates with the theoretical course of rays is called the angle of vertical refraction. In order to eliminate the influence of this type of errors, so-called atmospheric correction is introduced to all tacheometric measurements. Currently, total stations automatically determine and introduce corrections for observation, usually using only air temperature and atmospheric pressure. However, the number of factors responsible for the change in atmosphere density, and thus the deflection of the laser beam is much greater. And its influence is also affected by the length of the target and roughness of the area over which the measurement is made. The paper presents the analysis of the significance of various atmospheric and terrain factors that may affect the value of the vertical refraction angle. By the multiple regression method, with the use of the analyzed factors, equations describing the phenomenon of vertical refraction for four seasons have been designated. The defined equation coefficients were used to determine the refraction angle for the observations recorded on the post-flotation waste tank. To confirm the rightness of introducing an additional atmospheric correction, analyses were performed showing the percentage of corrected results.


2020 ◽  
Vol 216 ◽  
pp. 01075
Author(s):  
M.I. Bilalov ◽  
M.G. Ziganshin

Field testing of samples containing hexavalent chromium and organic compounds were carried out, which showed the possibility of intensifying the processes of their heat treatment using solar energy. The correlation analysis between various factors of atmospheric exposure and changes in the state of sam-ples was performed. In the course of the study, an estimate was obtained for the wavelength ranges of the near-UV, visible and near-IR spectrum, within which photo-chemical reactions of hexavalent chromium re-duction are possible. The temperature and hydrostatic pressure influence on the chemical reactions intensity in the sample was also assessed. Based on the data obtained, theoretical pre-conditions of energy efficiency of heat treatment process were formed, which should be verified by subsequent laboratory tests.


Author(s):  
F. A. Heckman ◽  
E. Redman ◽  
J.E. Connolly

In our initial publication on this subject1) we reported results demonstrating that contrast is the most important factor in producing the high image quality required for reliable image analysis. We also listed the factors which enhance contrast in order of the experimentally determined magnitude of their effect. The two most powerful factors affecting image contrast attainable with sheet film are beam intensity and KV. At that time we had only qualitative evidence for the ranking of enhancing factors. Later we carried out the densitometric measurements which led to the results outlined below.Meaningful evaluations of the cause-effect relationships among the considerable number of variables in preparing EM negatives depend on doing things in a systematic way, varying only one parameter at a time. Unless otherwise noted, we adhered to the following procedure evolved during our comprehensive study:Philips EM-300; 30μ objective aperature; magnification 7000- 12000X, exposure time 1 second, anti-contamination device operating.


Sign in / Sign up

Export Citation Format

Share Document