scholarly journals Common-mode suppressed differential bandpass filter based on open complementary split ring resonators fabricated in microstrip technology without ground plane etching

2014 ◽  
Vol 56 (4) ◽  
pp. 910-916 ◽  
Author(s):  
Paris Vélez ◽  
Miguel Durán-Sindreu ◽  
Jordi Naqui ◽  
Jordi Bonache ◽  
Ferran Martín
2012 ◽  
Vol 2012 ◽  
pp. 1-6 ◽  
Author(s):  
P. Vélez ◽  
J. Naqui ◽  
M. Durán-Sindreu ◽  
J. Bonache ◽  
F. Martín

Broadband bandpass filters based on open complementary split ring resonators (OCSRRs) coupled through admittance inverters, and implemented in microstrip technology, are reported. As compared to other broadband filters based on open split ring resonators (OSRRs), ground plane etching is not necessary in the proposed filters. The selectivity of the filters at the upper transition band is improved thanks to the presence of a controllable transmission zero. To demonstrate the potential of this approach, two illustrative prototype devices have been designed and fabricated.


DYNA ◽  
2015 ◽  
Vol 82 (193) ◽  
pp. 9-15
Author(s):  
Iván Eduardo Díaz Pardo ◽  
Carlos Arturo Suárez Fajardo ◽  
Gustavo Adolfo Puerto Leguizamón

This paper presents the study of the ground plane effect in passband filters using metamaterial cells in Open Split Ring Resonators (OSRR) structures on microstrip substrates. Three different configurations have been proposed, namely: by removing partially the ground plane of the OSRR cell back end, by windows design over the ground plane at the back end of each cell and by placing a full ground plane. The conducted analysis shows that the filter transmission response featuring a ground plane including windows proved to be the most flattened with the middle bandwidth of the three configurations. On the other hand, the performance of these filters is similar to a conventional filter based on three-pole microstrip technology but with a considerable reduction in size of about 60%.


2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
M. M. Islam ◽  
M. R. I. Faruque ◽  
M. T. Islam

A band-removal property employing microwave frequencies using complementary split ring resonators (CSRRs) is applied to design a compact UWB antenna wishing for the rejection of some frequency band, which is meanwhile exercised by the existing wireless applications. The reported antenna comprises optimization of a circular radiating patch, in which slotted complementary SRRs are implanted. It is printed on low dielectric FR4 substrate material fed by a partial ground plane and a microstrip line. Validated results exhibit that the reported antenna shows a wide bandwidth covering from 3.45 to more than 12 GHz, with a compact dimension of 22 × 26 mm2, and VSWR < 2, observing band elimination of 5.5 GHz WLAN band.


2012 ◽  
Vol 60 (10) ◽  
pp. 3023-3034 ◽  
Author(s):  
Jordi Naqui ◽  
Armando Fernandez-Prieto ◽  
Miguel Duran-Sindreu ◽  
Francisco Mesa ◽  
Jesús Martel ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document