In recent decades, geopolymer concrete (GPC) has been extensively researched as a potential substitute sustainable building material that may reduce CO2 emissions due to its utilization of industrial by-products. Fly ash (FA) and ground-granulated blast-furnace slag (GGBFS) are preferred geopolymer raw materials due to their obtainability and high alumina and silica concentrations. GGBFS-FA based GPC offers a clean and sustainable development technology alternative. In this study, the Taguchi method was used to optimize the mixed proportions of geopolymer concrete to achieve desired strength criteria. Four factors and four levels were considered: binder content, including four combinations of FA and GGFBS dosage, dosage of superplasticizer (0.5, 1.0, 1.5 and 2%), Na2SiO3/NaOH ratio (1.5, 2.0, 2.5 and 3), and molarity (6, 8, 10 and 12). Using these ingredients and factors, the effect of compressive strength was examined. The Taguchi approach using an L16 orthogonal array was employed to find the optimum condition of every factor while limiting the number of experiments. The findings indicated that the optimum synthesis conditions for maximum compressive strength obtained from the binder comprised 45% of FA, 45% of GGBFS and 10% of silica fume, 1.5% dosage of superplasticizer, Na2SiO3/NaOH ratio = 1.5, and 12 molar contents.
Desulfurization Ability of Blast Furnace Slag Containing High Al2O3 at 1773 K