Intelligent Optimal Control in Rare-Earth Countercurrent Extraction Process via Soft-Sensor

Author(s):  
Hui Yang ◽  
Chunyan Yang ◽  
Chonghui Song ◽  
Tianyou Chai
2013 ◽  
Vol 31 (2) ◽  
pp. 169-173 ◽  
Author(s):  
Fuxiang CHENG ◽  
Sheng WU ◽  
Chunsheng LIAO ◽  
Chunhua YAN

Minerals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 61
Author(s):  
Wenjie Zhang ◽  
Xian Xie ◽  
Xiong Tong ◽  
Yunpeng Du ◽  
Qiang Song ◽  
...  

Solvent extraction is the most widely used method for separation and purification of rare earth elements, and organic extractants such as di(2-ethylhexyl) phosphoric acid (P204) and di(1-methyl-heptyl) methyl phosphonate (P350) are most commonly used for industrial applications. However, the presence of impurity ions in the feed liquid during extraction can easily emulsify the extractant and affect the quality of rare earth products. Aluminum ion is the most common impurity ion in the feed liquid, and it is an important cause of emulsification of the extractant. In this study, the influence of aluminum ion was investigated on the extraction of light rare earth elements by the P204-P350 system in hydrochloric acid medium. The results show that Al3+ competes with light rare earths in the extraction process, reducing the overall extraction rate. In addition, the Al3+ stripping rate is low and there is continuous accumulation of Al3+ in the organic phase during the stripping process, affecting the extraction efficiency and even causing emulsification. The slope method and infrared detection were utilized to explore the formation of an extraction compound of Al3+ and the extractant P204-P350 that entered the organic phase as AlCl[(HA)2]2P350(o).


Author(s):  
Wei Li ◽  
Cheng Zheng ◽  
Jian Zhao ◽  
Zhengxiang Ning

A novel microwave assisted multi-stage countercurrent extraction (MAMCE) technique was developed for the extraction of dihydromyricetin from Chinese rattan tea, Ampelopsis grossedentata. The technique combined the advantages of microwave heating and dynamic multi-stage countercurrent extraction and achieved marked improvement in extraction efficiency over microwave assisted batch extraction. Analysis of dihydromyricetin concentrations in the solvent and matrix throughout the extraction process showed that by dividing the extraction into multiple stages and exchanging of solvents between stages, steady and substantial concentration gradients were established between the matrix and solvent, thus enabling the achievement of high extraction efficiency. The yield of dihydromyricetin was significantly affected by temperature, pH, solvent/material ratio and extraction time, and optimal extraction conditions were found to be 80-100°C, at acidic pH with a solvent/material ratio of 25-30 to 1 and extraction time of 5-10 min. With the high extraction efficiency and low usage of extraction solvent, MAMCE could prove to be a promising extraction technique which can be applied to the extraction of dihydromyricentin and other bioactive substances from natural materials.


Sign in / Sign up

Export Citation Format

Share Document