Optimization of novel single-step gelatin extraction method using RSM model for valorization of surimi industry by-products

Surimi industry produces large quantity of by-products as a combination of skin, bones, and scale, which due to technical difficulty in separation, are being currently utilized for production of low- value products such as biofertilizers and fish feed. Present paper focuses on utilization of combined skin, bones, and scale from Pink Perch (Nemipterus japonicus) obtained from surimi industry for gelatin extraction using single step process. Single step extraction method with acetic acid and water was optimized using Response Surface Methodology (RSM) to maximize yield and gel strength so that the process can be applied for sustainable utilization. Parameters such as pH (A), extraction temperature (B) and extraction time (C) with respect to yield and L-hydroxyproline content were optimized. Highest gelatin yield was obtained at pH 3, 75°C extraction temperature, and 30 min extraction time. Gelatin yield and L-hydroxyproline content under optimum condition were 16.2% and 41.62 mg.g−1. The chemical composition, functional, rheological, and structural properties of gelatin were examined and compared with commercial bovine gelatin. Gelatin thus obtained at optimized condition exhibited high gel strength (793g) and higher imino acid content (18.1%) than bovine gelatin. FTIR spectra depicted high similarities between both gelatin sample. Thus, the optimized method can be utilized for gelatin extraction from Pink Perch by-products for development of high value products such as food application.

Reflux Extraction Optimization and Antioxidant Activity of Phenolic Compounds from Pleioblastus amarus (Keng) Shell

Phenols were extracted from the Pleioblastus amarus (Keng) shell (PAS) using ethanol. A Plackett–Burman assessment indicated that the factors affecting polyphenol extraction included the ethanol concentration, extraction temperature, liquid to solid ratio, extraction time, and reflux extraction times; the best extraction parameters were the ethanol concentration of 75%, a 20:1 liquid to solid ratio, and an extraction time of 2.1 h. The number of polyphenols was 7.216 mg/g. Furthermore, the phenol composition analysis showed the presence of p-Coumaric acid (196.88 mg /mL) and rutin (312.9 mg /mL), which were used for the in vitro extraction and determination of the antioxidant activity. According to the A, B, C, and D antioxidant activity assays, the ethyl acetate phase was the strongest with low IC50 values of 0.169 ± 0.01 mg/mL, 0.289 ± 0.01 mg/mL, 0.372 ± 0.01 mg/mL, and 1.029 ± 0.03 mg/mL, respectively, confirming high antioxidant activity. For the n-butanol and petroleum ether phases, antioxidant activity was lower. This study showed that the polyphenol extract from Pleioblastus amarus (Keng) shell displayed excellent antioxidant activity, enhancing its practical application.

Production and Optimization of Bio-Based Silica Nanoparticle from Teff Straw (Eragrostis tef) Using RSM-Based Modeling, Characterization Aspects, and Adsorption Efficacy of Methyl Orange Dye

The brown teff straw was utilized in this study to produce silica using the sol-gel technique. After pretreatment, the raw material of brown teff straw was characterized. The data were analyzed using the central composite design and response surface technique, and four independent parameters, namely, temperature, NaOH concentration, rotational speed, and extraction time, were evaluated for process optimization. Before extracting silica with an alkaline solution, the silica content in the ash was determined using an AAS spectrometer. The silica content of teff straw ash is around 92.89%. The ash was treated with NaOH solution in the concentrations range of 1 M to 3 M (0.5 M interval). The extraction time varied at intervals of 55, 70, 85, 100, and 115 minutes. Temperatures were changed using magnetic stirrer equipment in the range of 80°C to 100°C (5°C interval). At 350 rpm, 400 rpm, 450 rpm, 500 rpm, and 550 rpm, the rotating speed was adjusted. The best extraction conditions for amorphous silica were 1.50 M NaOH, 109.99 min, 94.98°C, and a rotating speed of 499.57 rpm, with a maximum yield of 85.85%. XRD and FTIR analyses were used to assess the physicochemical characteristics of the extracted silica. The aqueous solutions of methyl orange were used to test the adsorption efficiency of silica. The percent of removal efficiency for methyl orange was 90.48%.

Optimization and Preliminary Physicochemical Characterization of Pectin Extraction from Watermelon Rind (Citrullus lanatus) with Citric Acid

Watermelon rind was used for the pectin extraction with citric acid as the extractant solvent. The effects of pH (2.0-3.0), extraction time (45-75 min), and liquid-solid ratio (10 : 1 to 40 : 1 mL/g) on the pectin yield, degree of esterification, methoxyl content, and anhydrouronic acid content were investigated using Box-Behnken surface response experimental design. The pH was the most significant variable for the pectin yield and properties. The responses optimized separately showed different optimal conditions for each one of the variables studied in this work. Therefore, the desirability function was used to determine the sole theoretical optimum for the highest pectin yield and highest anhydrouronic acid content, which was found to be pH of 2.0, extraction time of 62.31 min, and liquid-solid ratio of 35.07 mL/g. Under this optimal condition, the pectin yield, degree of esterification, methoxyl content, and anhydrouronic acid content were 24.30%, 73.30%, 10.45%, and 81.33%, respectively. At optimal conditions, watermelon rind pectin can be classified as high methoxyl and rapid-set pectin with high quality and high purity. Practical Applications. This study evaluated the pectin extraction from watermelon rind and carried out an optimization of multiple responses as a function of pH, time, and liquid-solid ratio to obtain the best preliminary quality parameters (pectin yield and anhydrouronic acid content). The results revealed that watermelon rind waste can be an inexpensive source to obtain good pectin quality and high purity. According to the chemical characterization and physicochemical properties studied, the extracted pectin from watermelon rind would have a high potential to be used in food industry.

Response Surface Methodology (RSM)-Based Optimization of Ultrasound-Assisted Extraction of Sennoside A, Sennoside B, Aloe-Emodin, Emodin, and Chrysophanol from Senna alexandrina (Aerial Parts): HPLC-UV and Antioxidant Analysis

In this study, ultrasound-assisted extraction conditions were optimized to maximize the yields of sennoside A, sennoside B, aloe-emodin, emodin, and chrysophanol from S. alexandrina (aerial parts). The three UAE factors, extraction temperature (S1), extraction time (S2), and liquid to solid ratio (S3), were optimized using response surface methodology (RSM). A Box–Behnken design was used for experimental design and phytoconstituent analysis was performed using high-performance liquid chromatography-UV. The optimal extraction conditions were found to be a 64.2 °C extraction temperature, 52.1 min extraction time, and 25.2 mL/g liquid to solid ratio. The experimental values of sennoside A, sennoside B, aloe-emodin, emodin, and chrysophanol (2.237, 12.792, 2.457, 0.261, and 1.529%, respectively) agreed with those predicted (2.152, 12.031, 2.331, 0.214, and 1.411%, respectively) by RSM models, thus demonstrating the appropriateness of the model used and the accomplishment of RSM in optimizing the extraction conditions. Excellent antioxidant properties were exhibited by S. alexandrina methanol extract obtained using the optimized extraction conditions with a DPPH assay (IC50 = 59.7 ± 1.93, µg/mL) and ABTS method (47.2 ± 1.40, µg/mL) compared to standard ascorbic acid.

Fractional Factorial Design Study for the Extraction of Cannabinoids from CBD-Dominant Cannabis Flowers by Supercritical Carbon Dioxide

The optimization of the supercritical fluid extraction (SFE) of cannabinoids, using supercritical carbon dioxide (scCO2), was investigated in a fractional factorial design study. It is hypothesized that four main parameters (temperature, pressure, dry flower weight, and extraction time) play an important role. Therefore, these parameters were screened at predetermined low, medium, and high relative levels. The density of scCO2 was used as a factor for the extraction of cannabinoids by changing the pressure and temperature. The robustness of the mathematical model was also evaluated by regression analysis. The quantification of major (cannabidiol (CBD), cannabidiolic acid (CBDA), delta 9-tetrahydrocannabinol (Δ9-THC), delta 8-tetrahydrocannabinol (Δ8-THC), and delta 9-tetrahydrocannabinol acid (THCA-A)) and minor (cannabidivann (CBDV), tetrahydrocannabivann (THCV), cannabigerolic acid (CBG), cannabigerol (CBGA), cannabinol (CBN), and cannabichomere (CBC)) cannabinoids in the scCO2 extract was performed by RP-HPLC analysis. From the model response, it was identified that long extraction time is a significant parameter to obtain a high yield of cannabinoids in the scCO2 extract. Higher relative concentrations of CBD(A) (0.78 and 2.41% w/w, respectively) and THC(A) (0.084 and 0.048% w/w, respectively) were found when extraction was performed at high relative pressures and temperatures (250 bar and 45 °C). The higher yield of CBD(A) compared to THC(A) can be attributed to the extract being a CBD-dominant cannabis strain. The study revealed that conventional organic solvent extraction, e.g., ethanol gives a marginally higher yield of cannabinoids from the extract compared to scCO2 extraction. However, scCO2 extraction generates a cleaner (chlorophyll-free) and organic solvent-free extract, which requires less downstream processing, such as purification from waxes and chlorophyll.

Extraction of Kaempferitrin and Astragalin from Justicia Spicigera by Supercritical Fluid Extraction and Its Comparison with Conventional Extraction

A study of supercritical fluid CO2 extraction of kaempferitrin (KM) and astragalin (KG) from Justicia spicigera (muicle) was conducted. A 33 Box-Behnken design was used to analyze the effects of pressure (200-300 bar), temperature (40-60° C), and co-solvent flow rate (0.5-1.0 mL/min). The highest KM and KG concentration were achieved at a pressure of 300 bar, a temperature of 60° C, and co-solvent flow rate of 1.0 mL/min (ethanol 99.5 %), with a constant CO2 flow rate of 5 mL/min and extraction time of 180 min. Under these conditions, the experimental values for KM and KG (115.08±2.81 and 56.63±9.02 mg/100 g of dry powder, respectively) were similar to those calculated by the models (109.0 and 44.07 mg/100 g of dry powder, respectively). The use of 70 % ethanol as co-solvent in the supercritical extraction process considerably improved the yields of KM and KG (562.71±156.85 and 79.90±18.03 mg/100 g of dry powder, respectively) compared to the 99.5 % ethanol extractions. The conventional extraction showed the highest yields of KM and KG (574.20±65.10 and 113.10±15.06 mg/100 g of dry powder, respectively) at 70° C and extraction time of 120 min. Adequate yields were achieved of KM and KG by supercritical fluid extraction compared with conventional extraction (98 and 70 %, respectively); therefore supercritical fluid extract of J. spicigera could be used in the development of functional foods, as well as its possible use in traditional medicine by the health professionals.

Extraction and Back-Extraction Behaviors of La(III), Ce(III), Pr(III), and Nd(III) Single Rare Earth and Mixed Rare Earth by TODGA

N,N,N′,N′-Tetraoctyl diglycolamide (TODGA), as a new extraction agent, is effective for its excellent performance and low environmental hazard, and it is very welcome for the rare earth separation process. In this paper, by controlling the extraction time, diluent type, acid type and its concentration, rare earth concentration, etc., the optimum extraction and back-extraction effects of TODGA on La(III), Ce(III), Pr(III), and Nd(III) and mixed rare earths were obtained. The experiment showed that 0.10 mol·L−1 TODGA had the best extraction effect on single rare earth under the conditions of using petroleum ether as diluent, 5 mol·L−1 nitric acid, 20 min extraction time, and 0.01 mol·L−1 rare earth. In the mixed rare earth extraction, the percentage concentrations of La(III), Ce(III), Pr(III), and Nd(III) could be achieved from 21.7%, 19.9%, 30.8%, and 22.2% at the initial stage to 90.5%, 37%, 51%, and 62% after extraction, respectively, by controlling the number of back-extraction cycles and the concentrations of hydrochloric acid and nitric acid in the back-extraction system. The TODGA–rare earth carrier system showed the best back-extraction effect when the hydrochloric acid concentration was 1 mol·L−1 and the back-extraction time was 20 min. At the same time, the mixed rare earth liquid system with low initial concentration was selected for extraction and separation of mixed rare earth. The separation effect was better, and the recovery rate was higher than that of mixed rare earth liquid system with a high initial concentration.

Quality Characteristics of Senior-Friendly Gelatin Gels Formulated with Hot Water Extract from Red Maple Leaf as a Novel Anthocyanin Source

The objectives of this study were to evaluate antioxidant capacity of hot water extract from red maple leaf with different extraction times (experiment I) and to determine their impacts on color, free anthocyanin content, and hardness of gelatin gels (experiment II). In experiment I, hot water extraction time (30, 60, 120, 180, and 360 min at 60 °C) was fixed as a main effect. The different extraction times had no impacts on total polyphenol content and DPPH radical scavenging activity (p > 0.05). However, extraction time for 360 min could decrease anthocyanin content as well as ferric reducing antioxidant power (p < 0.05). In experiment II, 6%, 18%, and 30% gelatin gels were prepared without/with red maple leaf extract (1000 mg/L). The red maple leaf extract significantly increased redness, yellowness, and hardness, but decreased free anthocyanin content. Such impacts were obviously observed at high gelatin concentration. Thus, red maple leaf extract could be a novel anthocyanin source for improving antioxidant capacity and reddish color of gelatin gels. However, the addition amount of red maple leaf extract may be limited in the development of senior-friendly jelly food for soft texture in that it could increase the hardness of the gelatin gel.

Effects of Sargassum thunbergii Extract on Skin Whitening and Anti-Wrinkling through Inhibition of TRP-1 and MMPs

Sargassum thunbergii has been traditionally used as an edible and medicinal material in oriental countries. However, the skin-whitening and anti-wrinkling effects of S. thunbergii have not yet been investigated. This study was conducted to establish optimal extraction conditions for the production of bioactive compounds with antioxidant activity as well as skin-whitening and anti-wrinkle effects using ultrasound-assisted extraction (UAE) in S. thunbergii. The extraction time (5.30~18.7 min), extraction temperature (22.4~79.6 °C), and ethanol concentration (0.0~99.5%), which are the main variables of the UAE, were optimized using a central composite design. Quadratic regression equations were derived based on experimental data and showed a high coefficient of determination (R2 > 0.85), demonstrating suitability for prediction. The optimal UAE condition for maximizing all dependent variables, including radical scavenging activity (RSA), tyrosinase inhibitory activity (TIA), and collagenase inhibitory activity (CIA), was identified as an extraction time of 12.0 min, an extraction temperature of 65.2 °C, and ethanol of 53.5%. Under these conditions, the RSA, TIA, and CIA of S. thunbergii extract were 86.5%, 88.3%, and 91.4%, respectively. We also confirmed S. thunbergii extract had inhibitory effects on the mRNA expression of tyrosinase-related protein-1, matrix metalloproteinase-1, and matrix metalloproteinase-9, which are the main genes of melanin synthesis and collagen hydrolysis. Liquid chromatography-tandem mass spectrometry was used to identify the main phenolic compounds in S. thunbergii extract, and caffeic acid was identified as a major peak, demonstrating that high value-added ingredients with skin-whitening and anti-wrinkling effects can be produced from S. thunbergii and used for developing cosmetic materials.