Measurement of Cardiac Magnetic Field Vector

1989 ◽  
pp. 425-428 ◽  
Author(s):  
Y. Sakauchi ◽  
H. Kado ◽  
N. Awano ◽  
N. Kasai ◽  
M. Higuchi ◽  
...  
Sensors ◽  
2021 ◽  
Vol 21 (19) ◽  
pp. 6450
Author(s):  
Sharanabasaweshwara Asundi ◽  
Norman Fitz-Coy ◽  
Haniph Latchman

Pico- and nano-satellites, due to their form factor and size, are limited in accommodating multiple or redundant attitude sensors. For such satellites, Murrell’s implementation of the extended Kalman filter (EKF) can be exploited to accommodate multiple sensor configurations from a set of non redundant attitude sensors. The paper describes such an implementation involving a sun sensor suite and a magnetometer as attitude sensors. The implementation exploits Murrell’s EKF to enable three sensor configurations, which can be operationally commanded, for satellite attitude estimation. Among the three attitude estimation schemes, (i) sun sensor suite and magnetometer, (ii) magnetic field vector and its time derivative and (iii) magnetic field vector, it is shown that the third configuration is better suited for attitude estimation in terms of precision and accuracy, but can consume more time to converge than the other two.


2021 ◽  
Vol 923 (1) ◽  
pp. 84
Author(s):  
Ana Belén Griñón-Marín ◽  
Adur Pastor Yabar ◽  
Yang Liu ◽  
J. Todd Hoeksema ◽  
Aimee Norton

Abstract A spectral line inversion code, Very Fast Inversion of the Stokes Vector (VFISV), has been used since 2010 May to infer the solar atmospheric parameters from the spectropolarimetric observations taken by the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory. The magnetic filling factor, the fraction of the surface with a resolution element occupied by magnetic field, is set to have a constant value of 1 in the current version of VFISV. This report describes an improved inversion strategy for the spectropolarimetric data observed with HMI for magnetic field strengths of intermediate values in areas spatially not fully resolved. The VFISV inversion code has been modified to enable inversion of the Stokes profiles with two different components: one magnetic and one nonmagnetic. In this scheme, both components share the atmospheric components except for the magnetic field vector. In order to determine whether the new strategy is useful, we evaluate the inferred parameters inverted with one magnetic component (the original version of the HMI inversion) and with two components (the improved version) using a Bayesian analysis. In pixels with intermediate magnetic field strengths (e.g., plages), the new version provides statistically significant values of filling fraction and magnetic field vector. Not only does the fitting of the Stokes profile improve, but also the inference of the magnetic parameters and line-of-sight velocity are obtained uniquely. The new strategy is also proven to be effective for mitigating the anomalous hemispheric bias in the east–west magnetic field component in moderate field regions.


Author(s):  
Rafał MECH

Paper shows study on the magnetoelectric composite material placed in an external magnetic field with changing magnetic field vecotr. An experimental setup for investigation of magnetoelectric properties of magnetostrictive-piezoelectric material was prepared. The hybrid structure is made of magnetostrictive composite (based on Terfenol-D) and piezoelectric material. Experimental results shown the response of prepared hybrid material to the rate of changes of direction of magnetic field vector. Investigation were mainly focused on possibility of generating of electric power from prepared material. It was found that the prepared hybrid material exhibits magnetoelectric effect in the case of work when direction of magnetic field vector was changing. This effect might be use in Energy Harvesting applications.


Sign in / Sign up

Export Citation Format

Share Document