Comparison of Soil Strength Parameters in a Small and Large Scale Direct Shear Test

2018 ◽  
pp. 173-177
Author(s):  
S. Farid F. Mojtahedi ◽  
Saeed Rezvani ◽  
Ali Nazari
Keyword(s):  
Large Scale ◽  
Direct Shear Test ◽  
Shear Test ◽  
Soil Strength ◽  
Direct Shear ◽  
Strength Parameters

scholarly journals Determination of Soil Strength Using 2D Geoelectric Methods and Direct Shear Test (Case Study in Istana Tidar Regency Housing – Jember)

2017 ◽  
Vol 5 (2) ◽  
Author(s):  
Nurul Priyantari ◽  
Supriyadi . ◽  
Devi Putri Sulistiani ◽  
Winda Aprita Mayasari
Keyword(s):  
Direct Shear Test ◽  
Shear Test ◽  
Resistivity Measurement ◽  
Soil Strength ◽  
Test Case ◽  
Cohesive Soils ◽  
Direct Shear ◽  
Geoelectrical Resistivity

2D geoelectrical resitivity measurement and direct shear test has been conducted to determine soil type and soil strength on land settlement Istana Tidar Regency housing, Jember. Resistivity measurement is conducted at two line that have latitude 08.10’102” – 08.10’108” S, 113.43’404” – 113.43’408” E (line 1) dan 08.10’102” – 08.10’108” S, 113.43’410” – 113.43’414” E (line 2). Soil specimen were taken at 3 point, 2 point at line 1 and 1 point at line 2. Based on result of 2D geoelectrical resistivity measurement and direct shear test, this location was dominated by clay, silt and sandy silt are included in the type of cohesive soils. Soil strength of this type is capable to support light bulding contruction one or two floors.

Discussion of “Direct-Shear Test for Effective-Strength Parameters”

1963 ◽  
Vol 89 (1) ◽  
pp. 313-317
Author(s):  
Leslie G. Bromwell ◽  
Charles C. Ladd ◽  
Raymond H. Rogers ◽  
Carl B. Crawford
Keyword(s):  
Direct Shear Test ◽  
Shear Test ◽  
Direct Shear ◽  
Strength Parameters ◽  
Effective Strength

The Effect of Scale Direct Shear Test on the Strength Parameters of Clayey Sand in Isfahan City, Iran

2010 ◽  
Vol 10 (18) ◽  
pp. 2027-2033 ◽  
Author(s):  
R. Dadkhah ◽  
M. Ghafoori ◽  
R. Ajalloeian ◽  
G.R. Lashkaripo
Keyword(s):  
Direct Shear Test ◽  
Shear Test ◽  
Direct Shear ◽  
Strength Parameters ◽  
Clayey Sand

scholarly journals Influence of Maximum Particle Diameter on the Mechanical Behavior of Soil-Rock Mixtures

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Zhuoling He ◽  
Junyun Zhang ◽  
Tao Sun
Keyword(s):  
Shear Strength ◽  
Large Scale ◽  
Direct Shear Test ◽  
Shear Test ◽  
Particle Diameter ◽  
Size Difference ◽  
Direct Shear ◽  
Fine Grained ◽  
Fine Grained Soil ◽  
Maximum Particle

With the steady development of the development of the western region in China, the construction of mountain highways has developed rapidly, and the soil-rock mixed filler, as an excellent filler, is widely used in the subgrade filling of mountain highways. Unlike ordinary fine-grained soil, the source of the soil-rock mixtures (S-RMs) is not unique, and the particle size difference is large and the water content is not uniform, resulting in very complicated mechanical properties. But the current highway embankment codes are still mainly established on the fine-grained soil. It is not fully applicable to soil-rock filled embankment. Based on soil-rock filled embankment engineering practice, this research uses a large-scale direct shear test to research the mechanical characteristics of the S-RMs with different maximum particle diameters. According to the large-scale direct shear test of S-RMs with different maximum particle diameters, the shear displacement vs shear stress curve, shear dilation, and strength characteristics with maximum particle diameter were analyzed. Results demonstrate that whether secondary hardening occurs mainly depends on the normal stress and the maximum particle diameter of the filler. At different maximum particle diameters, the horizontal displacement vs vertical displacement curves of the S-RMs can be roughly divided into continuous shearing and beginning of shearing and quick dilation. And the shear strength increases with the increase of the maximum particle diameter. Moreover, the cohesion decreases first and then increases with the increase of the maximum particle diameter, and the internal friction angle increases with the increase of the maximum particle diameter. Therefore, some RBs with large particle diameter added to filler can effectively improve the shear strength of the S-RMs, which may be valuable for realistic engineering.

scholarly journals Determining the Shear Strength Properties of a Soil-geogrid Interface Using a Large-scale Direct Shear Test Apparatus

2020 ◽  
Author(s):  
Jakub Stacho ◽  
Monika Sulovska ◽  
Ivan Slavik
Keyword(s):  
Shear Stress ◽  
Shear Strength ◽  
Large Scale ◽  
Direct Shear Test ◽  
Shear Test ◽  
Strength Properties ◽  
Coarse Grained ◽  
Direct Shear ◽  
Test Apparatus ◽  
Fine Gravel

The paper deals with the laboratory testing of coarse-grained soils that are reinforced using a geogrid. The shear strength properties were determined using a large-scale direct shear test apparatus. The tests were executed on original as well as on reinforced soil, when the geogrid was placed on a sliding surface, which permitted determining the shear strength properties of the soil-geogrid interface. The aim of the tests was to determine the interface shear strength coefficient α, which represents the ratio of the shear strength of the soil-geogrid interface to the unreinforced soil. The tests were executed on 3 samples of coarse-grained materials, i.e., poorly graded sand, poorly graded fine gravel and poorly graded medium gravel. Two types of geogrids were tested, i.e., a woven polyester geogrid and a stiff polypropylene geogrid. The results of the laboratory tests on the medium gravel showed that the reduction coefficient α reached higher values in the case of the stiff polypropylene geogrid. In the cases of the fine gravel and sand, the values of the interface coefficient α were similar to each other. The shear strength of the interface was reduced or was similar to the shear strength of unreinforced soil in a peak shear stress state, but significantly increased with horizontal deformations, especially for the fine gravel and sand. The largest value of the coefficient α was measured in the critical shear stress state. Based on the results of the testing, a correlation which allows for determining the optimal grain size distribution was obtained.

scholarly journals Effect of Rock Particle Content on the Mechanical Behavior of a Soil-Rock Mixture (SRM) via Large-Scale Direct Shear Test

2019 ◽  
Vol 2019 ◽  
pp. 1-16
Author(s):  
Longqi Liu ◽  
Xuesong Mao ◽  
Yajun Xiao ◽  
Qian Wu ◽  
Ke Tang ◽  
...  
Keyword(s):  
Shear Strength ◽  
Normal Stress ◽  
Large Scale ◽  
Direct Shear Test ◽  
Shear Test ◽  
Volumetric Strain ◽  
Direct Shear ◽  
Stress Strain ◽  
Particle Content ◽  
Rock Particle

The mechanical strength of the landslide deposits directly affects the safety and operation of the roads in the western mountainous area of China. Therefore, the research is aimed at studying the mechanisms of a landslide deposit sample with different rock particle contents by analyzing its characteristics of the stress-strain behavior, the “jumping” phenomenon, the volumetric strain, and the shear strength parameters via a large-scale direct shear test. Stress-strain results show that stress-strain curves can be divided into 3 different stages: liner elastic stage, yielding stage, and strain-hardening stage. The shear strength of SRM behaves more like “soil” at a lower rock particle content and behaves more like “rock joints” at a higher rock particle content. Characteristics of the “jumping” phenomenon results show that the “intense jumping” stage becomes obvious with the increasing rock particle content and the normal stress. However, the lower the rock particle content is, the more obvious the “jumping” phenomenon under the same normal stress is. Volumetric strain results show that the sample with a lower rock particle content showed a dilatancy behavior under the low normal stress and shrinkage behavior under the high normal stress. The dilatancy value becomes smaller with the increasing normal stress. The maximum shear stress value of the rock particle content corresponds to the maximum value of dilatancy or shrinkage. We also conclude that the intercept of the Mohr failure envelope of the soil-rock mixture should be called the “equivalent cohesion,” not simply called the “cohesion.” The higher the normal stress and rock particle content are, the bigger the equivalent cohesion and the internal friction angle is.

Sign in / Sign up

Export Citation Format

Share Document