An Octagonal Shaped MIMO UWB Antenna with Dual Band Notched Characteristics

2019 ◽  
pp. 599-606
Author(s):  
V. N. Koteswara Rao Devana ◽  
A. Maheswara Rao
Keyword(s):  
Dual Band ◽  
Uwb Antenna

scholarly journals Realizing UWB Antenna Array with Dual and Wide Rejection Bands Using Metamaterial and Electromagnetic Bandgaps Techniques

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 269
Author(s):  
Ayman A. Althuwayb ◽  
Mohammad Alibakhshikenari ◽  
Bal S. Virdee ◽  
Pancham Shukla ◽  
Ernesto Limiti
Keyword(s):  
Antenna Array ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Dual Band ◽  
Area Network ◽  
Electromagnetic Bandgap ◽  
Uwb Antenna ◽  
Average Gain ◽  
Left Handed ◽  
Notched Band

This research article describes a technique for realizing wideband dual notched functionality in an ultra-wideband (UWB) antenna array based on metamaterial and electromagnetic bandgap (EBG) techniques. For comparison purposes, a reference antenna array was initially designed comprising hexagonal patches that are interconnected to each other. The array was fabricated on standard FR-4 substrate with thickness of 0.8 mm. The reference antenna exhibited an average gain of 1.5 dBi across 5.25–10.1 GHz. To improve the array’s impedance bandwidth for application in UWB systems metamaterial (MTM) characteristics were applied it. This involved embedding hexagonal slots in patch and shorting the patch to the ground-plane with metallic via. This essentially transformed the antenna to a composite right/left-handed structure that behaved like series left-handed capacitance and shunt left-handed inductance. The proposed MTM antenna array now operated over a much wider frequency range (2–12 GHz) with average gain of 5 dBi. Notched band functionality was incorporated in the proposed array to eliminate unwanted interference signals from other wireless communications systems that coexist inside the UWB spectrum. This was achieved by introducing electromagnetic bandgap in the array by etching circular slots on the ground-plane that are aligned underneath each patch and interconnecting microstrip-line in the array. The proposed techniques had no effect on the dimensions of the antenna array (20 mm × 20 mm × 0.87 mm). The results presented confirm dual-band rejection at the wireless local area network (WLAN) band (5.15–5.825 GHz) and X-band satellite downlink communication band (7.10–7.76 GHz). Compared to other dual notched band designs previously published the footprint of the proposed technique is smaller and its rejection notches completely cover the bandwidth of interfering signals.

scholarly journals Implementation and investigation of circular slot UWB antenna with dual-band-notched characteristics

2011 ◽  
Vol 2011 (1) ◽  
Author(s):  
Abdol Aziz Kalteh ◽  
Gholamreza DadashZadeh ◽  
Mohammad Naser-Moghadasi
Keyword(s):  
Dual Band ◽  
Uwb Antenna

Frequency reconfigurable antenna for cognitive radios with sequential UWB mode of perception and multiband mode of operation

2018 ◽  
Vol 10 (9) ◽  
pp. 1096-1102 ◽  
Author(s):  
Ali Mansoul ◽  
Farid Ghanem
Keyword(s):  
Narrow Band ◽  
Cognitive Radios ◽  
Dual Band ◽  
Uwb Antenna ◽  
Switch Operation ◽  
Resonance Frequencies ◽  
Mode Of Operation ◽  
The Mean ◽  
Conductive Strip ◽  
Good Agreement

AbstractIn this work, an UWB/narrow band reconfigurable elliptical-shaped monopole antenna for cognitive radio applications with sequential perception and operation modes is presented. The proposed approach consists in integrating a reconfigurable filter, in an UWB antenna ground plan, by the mean of four horizontal slots and integrated switches that allow inserting/removing/varying zeros and poles in the frequency response. By acting on the slot lengths in order to alter their resonance frequencies, the different switch configurations allow the antenna to switch between an UWB mode that could be used for the perception (sensing) and different narrowband modes, mono-band and dual-band, that could be used for the operation at 2.4 or/and 3.5 GHz. To validate the concept, an experimental prototype has been fabricated and a good agreement between the simulated and the measured S-parameters has been obtained. While the presented work uses the presence/absence of a perfect conductive strip (PEC) to model real switch operation, it is believed that the obtained results conjugated with previous work using real switches on a very similar structure allows validating approach.

COMPACT PRINTED DUAL BAND-NOTCHED U-SHAPE UWB ANTENNA

2012 ◽  
Vol 27 ◽  
pp. 169-181 ◽  
Author(s):  
Sanjeev Kumar Mishra ◽  
Jayanta Mukherjee
Keyword(s):  
Dual Band ◽  
Uwb Antenna

PRINTED BLUETOOTH AND UWB ANTENNA WITH DUAL BAND-NOTCHED FUNCTIONS

2011 ◽  
Vol 26 ◽  
pp. 39-48 ◽  
Author(s):  
Feng-Chao Ren ◽  
Fu-Shun Zhang ◽  
Jian Hui Bao ◽  
Yong-Chang Jiao ◽  
Lei Zhou
Keyword(s):  
Dual Band ◽  
Uwb Antenna

Design of a dual band-notched UWB antenna and improvement of the 5.5 GHz WLAN notched characteristic

2019 ◽  
Vol 33 (14) ◽  
pp. 1834-1845 ◽  
Author(s):  
Guoping Gao ◽  
Bin Hu ◽  
Chen Yang ◽  
Shaofei Wang ◽  
Ruifeng Zhang
Keyword(s):  
Dual Band ◽  
Uwb Antenna
Sign in / Sign up

Export Citation Format

Share Document