Abstract
We conducted a study using the magnetotelluric method in the Kutai Basin, which is one of the largest and deepest tertiary sedimentary basin located in the province of East Kalimantan, Indonesia. The Kutai Basin, which is one of the sedimentary basin that is proven to produce hydrocarbons in Indonesia, also has the potential for shale gas with all the complexities of its geological structure. Inversion of 2-D MT can generally be done in three modes with different sensitivity. We perform data processing objectively to obtain the best quality data. We continued our data processing to the inversion process with a range from 80.78% to 97.09% coherency data. We also performed sensitivity skewness calculations to determine the dimensionality of our data. The map of sensitivity skewness is shown for the vertical path A – A’ with direction N – S in our study area. Based on the calculation results, the skewness value below 0.3 is obtained around the frequency 320 - 0.002 Hz, and associated with the 2-D structure while value above 0.3 are obtained around the frequency 0.00198 - 0.00034 Hz at KT34 and KT36 stations. Based on dimensionality calculations, it is concluded that the MT data in the Kutai Basin is dominated by 2-D structural responses, so that the TE + TM (invariant) mode is the best measurement mode for inversion modeling. We also performed calculations to obtain the optimum smoothness factor (tau) using a trade-off curve. Based on the results of the inversion with the optimization of these data parameters, we obtained a subsurface geological structure pattern such as fault and fold structure along the vertical path of A – A’. The low resistivity anomaly is interpreted as a response to the presence of black shale which is part of the Pamaluan Formation. The top of the Pamaluan Formation is estimated at the depth that varies from 2000m to 4000m below the surface along the A – A’ vertical cross-section.
Local Earthquake Tomography in the Tjörnes Fracture Zone (North Iceland)
