Dielectric Elastomer Intelligent Devices for Soft Robots

Author(s):  
Yawu Wang ◽  
Jundong Wu ◽  
Wenjun Ye ◽  
Peng Huang ◽  
Kouhei Ohnishi ◽  
...  
Author(s):  
bicheng Chen ◽  
Nianfeng Wang ◽  
Haozheng Chen ◽  
Xianmin Zhang

2019 ◽  
Vol 28 (10) ◽  
pp. 103002 ◽  
Author(s):  
Ujjaval Gupta ◽  
Lei Qin ◽  
Yuzhe Wang ◽  
Hareesh Godaba ◽  
Jian Zhu

2021 ◽  
pp. 1-26
Author(s):  
Fanghao Zhou ◽  
Jin He ◽  
Mingqi Zhang ◽  
Youhua Xiao ◽  
Chen Zheng ◽  
...  

Abstract Dielectric elastomer (DE) possesses attributes such as large deformation and fast response. As a typical DE actuating structure, the multilayered DE bending actuator (MDEBA) is lightweight, and can actuate in relatively low voltage without a rigid frame and pre-stretch. These attributes arouse wide research interest in the MDEBA on the application of soft robots. However, due to its large deformation and nonlinear electromechanical dynamics, the control of MDEBA remains highly challenged. Considering the large bending deformation and gravity effect, we develop an electromechanical dynamic model-based control strategy, which can adaptively compensate for the parameter uncertainties during the actuation of MDEBA. Experimental results validate that this control strategy provides highly enhanced control performances compared to the PID controller. The electromechanical modeling method and dynamic control strategy may guide the further study of MDEBA, soft robots, and flexible devices.


2017 ◽  
Vol 12 (1) ◽  
pp. 011003 ◽  
Author(s):  
Guo-Ying Gu ◽  
Jian Zhu ◽  
Li-Min Zhu ◽  
Xiangyang Zhu

2018 ◽  
Vol 27 (11) ◽  
pp. 115024 ◽  
Author(s):  
Wen-Bo Li ◽  
Wen-Ming Zhang ◽  
Hong-Xiang Zou ◽  
Zhi-Ke Peng ◽  
Guang Meng

2019 ◽  
Vol 116 (7) ◽  
pp. 2476-2481 ◽  
Author(s):  
Mihai Duduta ◽  
Ehsan Hajiesmaili ◽  
Huichan Zhao ◽  
Robert J. Wood ◽  
David R. Clarke

Soft robotics represents a new set of technologies aimed at operating in natural environments and near the human body. To interact with their environment, soft robots require artificial muscles to actuate movement. These artificial muscles need to be as strong, fast, and robust as their natural counterparts. Dielectric elastomer actuators (DEAs) are promising soft transducers, but typically exhibit low output forces and low energy densities when used without rigid supports. Here, we report a soft composite DEA made of strain-stiffening elastomers and carbon nanotube electrodes, which demonstrates a peak energy density of 19.8 J/kg. The result is close to the upper limit for natural muscle (0.4–40 J/kg), making these DEAs the highest-performance electrically driven soft artificial muscles demonstrated to date. To obtain high forces and displacements, we used low-density, ultrathin carbon nanotube electrodes which can sustain applied electric fields upward of 100 V/μm without suffering from dielectric breakdown. Potential applications include prosthetics, surgical robots, and wearable devices, as well as soft robots capable of locomotion and manipulation in natural or human-centric environments.


2018 ◽  
Vol 86 (3) ◽  
Author(s):  
Liyuan Chen ◽  
Weijia Chen ◽  
Yaoting Xue ◽  
Mingqi Zhang ◽  
Xiangping Chen ◽  
...  

Compared to robots and devices made of rigid components, soft robots and flexible devices driven by soft active materials possess various advantages including high adaptability under extreme environment and compatibility with a human. Dielectric elastomer (DE) membrane, which is commonly used in building soft actuators, can achieve large actuation by the combined loadings of voltage-induced Maxwell stress and fluidic pressures (pneumatic and hydraulic pressure). This paper proposes a pneumatic–hydraulic coupled electromechanical actuator (PHCEA), which exhibits strong coupling effect of electromechanical actuation (the Maxwell stress on DE membrane), pneumatic and hydraulic pressures. Considering the moving boundary and state transition, a computational model has been developed to investigate the coupling behaviors of the PHCEA. The numerical result by this model is in accordance with the experimental measurements. The combination of experimental data and the theoretical result indicates that the state transition and moving boundary separate the potential region of electrical breakdown and mechanical damage. This model can be utilized as a practical method to characterize the performance and guide the design of soft devices. The experimental setup and computational method of the PHCEA bring new insights into the fabrication and characterization of soft robots, adaptive optics, and flexible bio-medical devices. The PHCEA possesses wide applications in underwater robots, soft muscles, and microfluidics systems. It can serve as the gas bladder of soft swimming robots, the soft actuator of hydraulic–pneumatic coupling systems, and the gas–liquid valve of flexible microfluidics systems.


Sign in / Sign up

Export Citation Format

Share Document