In this study, a life cycle assessment (LCA) was used to investigate the environmental benefits of using styrene-butadiene-styrene (SBS) to modify polylactide (PLA)-based wood plastic composites (WPCs), with a process-based and input–output hybrid model. The results showed that one metric ton of the SBS-modified WPCs required 1.93 × 108 kJ of energy (Sample 2) and 46 m3 of water (Sample 4), and that it could produce 42.3 kg of solid waste (Sample 2) during its cradle-to-gate life cycle phases. The environmental impact load (EIL) and photochemistry oxidation potential (PCOP) accounted for the largest share, while the eutrophication potential (EP) took the smallest one. The total EIL index of Samples 1, 2, 3, and 4 added up to 1.942, 1.960, 1.899, and 1.838, respectively. The SBS-modified WPCs were found to be more environmentally friendly than their unmodified counterparts when they had the same or higher wood fiber (WF) content. SBS was viable to toughen the PLA-based WPCs from an environmental perspective. This cradle-to-gate LCA is likely to help optimize the manufacturing process and mitigate environmental impacts for the natural fiber-reinforced polymer biocomposites.
Life Cycle Assessment of Novel Aircraft Interior Panels Made from Renewable or Recyclable Polymers with Natural Fiber Reinforcements and Non-Halogenated Flame Retardants
