Ductile Fracture and Stress-Induced Defects in Multiscaled Plastic Deformation

Author(s):  
Ming Wang Fu
1986 ◽  
Vol 83 (1) ◽  
pp. 39-44 ◽  
Author(s):  
R.J. Klassen ◽  
M.N. Bassim ◽  
M.R. Bayoumi ◽  
H.G.F. Wilsdorf

Author(s):  
Andrew Cosham ◽  
Naoto Hagiwara ◽  
Naoki Fukuda ◽  
Tomoki Masuda

New and existing pipelines can be subjected to high plastic strains. Denting a pipeline causes permanent plastic deformation. Onshore pipelines subject to subsidence, frost heave or earthquake loading can experience significant plastic strain during service. Offshore pipelines that are reeled prior to laying, or are laid in deep water, or are operating at high temperatures and high pressures, can experience significant plastic strain both prior to, and during, service. Experimental studies have indicated that pre-strain (permanent plastic deformation) has a detrimental effect on the fracture toughness of steel; it reduces the resistance to crack initiation, reduces the resistance to crack growth, and increases the transition temperature. Consequently, there is a need for a thorough understanding of the effect of pre-strain on the fracture toughness of line pipe. Accordingly, a theoretical model for predicting the effect of tensile pre-strain on the ductile fracture toughness has been developed using the local approach. The effect of pre-strain is expressed in terms of an equation for the ratio of the fracture toughness of the pre-strained material to that of the virgin (not pre-strained) material. The model indicates that the effect of tensile pre-strain on the material’s fracture toughness can be characterised in terms of the effect of pre-strain on the stress-strain characteristics of the material, the critical fracture strain for a stress state corresponding to that during pre-strain, and several parameters that relate to the conditions for ductile fracture (or cleavage fracture). The implications of the model are that it may be possible to estimate the reduction in toughness caused by pre-strain simply from a full stress-strain curve of the virgin material. The model has been validated against the results of crack tip opening displacement (CTOD) tests conducted by Tokyo Gas on two line pipe steels subject to uniaxial tensile pre-strain. It is shown that the predictions and trends of the theoretical model are in broad agreement with the test results.


2011 ◽  
Vol 264-265 ◽  
pp. 913-918 ◽  
Author(s):  
Jindrich Petruška ◽  
Jan Borkovec ◽  
Jiri Hulka ◽  
Rudolf Foret

Experimental and numerical studies of fracture prediction with Czech steel no.41 2050 are presented. Seven ductile fracture criteria were calibrated, applied to simulation of rod cutting and bolt head trimming operation and compared with experimental results of these processes, obtained in semi-industrial conditions in cooperation with our industrial partner. Movement of the cutting tool was stopped in predefined positions, so that a step-by-step mapping of subsequent stages of both processes were obtained at different specimens. By metallographic analysis of these, full view of plastic deformation and damage in the vicinity of the cutting region could be seen, and their comparison with the computational results was done.


1977 ◽  
Vol 63 (9) ◽  
pp. 1549-1555
Author(s):  
Tatsu FUJITA ◽  
Atsuo MIZUTA ◽  
Osamu TSUDA

Sign in / Sign up

Export Citation Format

Share Document