Prediction of Ultimate Bearing Capacity of Eccentrically Loaded Rectangular Foundations Using ANN

2017 ◽  
pp. 148-159 ◽  
Author(s):  
B. P. Sethy ◽  
C. R. Patra ◽  
N. Sivakugan ◽  
B. M. Das
Keyword(s):  
Bearing Capacity ◽  
Ultimate Bearing Capacity

scholarly journals Study on the ultimate bearing capacity of a strip footing influenced by an irregular underlying cavity in karst areas

2021 ◽  
Author(s):  
Lianheng Zhao ◽  
Shan Huang ◽  
Zhonglin Zeng ◽  
Rui Zhang ◽  
Gaopeng Tang ◽  
...  
Keyword(s):  
Bearing Capacity ◽  
Ultimate Bearing Capacity ◽  
Strip Footing ◽  
Karst Areas

Experimental Investigation for Horizontal Ultimate Bearing Capacity and Target Ductility Factor Improvement Results of the RC Column Reinforced by AFL with Damages

2014 ◽  
Vol 488-489 ◽  
pp. 497-500
Author(s):  
You Lin Zou ◽  
Pei Yan Huang
Keyword(s):  
Bearing Capacity ◽  
Ultimate Bearing Capacity ◽  
Test Results ◽  
Rc Columns ◽  
Static Test ◽  
Rc Column ◽  
Ductility Factor ◽  
Secant Stiffness ◽  
Function Relationship ◽  
Reversed Cyclic

Deem test results from the low reversed cyclic loading quasi-static test with 2 RC columns as the basic information of secant stiffness damage of the reference column and take use of the TMS instrument in the test to artificially make the damage percentage of secant stiffness of the RC column as 33%, 50% and 66%, 6 damaged columns in total; reinforce the 6 damaged columns and 2 undamaged ones under the same conditions with AFL, through quasi-static contrast test. Test results show that it is able to effectively boost horizontal ultimate bearing capacity and ductility deformability of the RC columns with AFL for reinforcement; besides, there is a linear function relationship between horizontal ultimate bearing capacity, target ductility factor, and damage percentage of secant stiffness.

Effect of horizontal ring beams on the ultimate bearing capacity of masonry walls

2013 ◽  
Vol 44 (5) ◽  
pp. 436-448 ◽  
Author(s):  
J. Radnic ◽  
M. Smilovic ◽  
A. Harapin ◽  
M. Sunara
Keyword(s):  
Bearing Capacity ◽  
Ultimate Bearing Capacity ◽  
Masonry Walls

Bearing Capacity Characteristic of Unsaturated Granular Soils

2011 ◽  
Vol 261-263 ◽  
pp. 989-993 ◽  
Author(s):  
Anuchit Uchaipichat ◽  
Ekachai Man Koksung
Keyword(s):  
Bearing Capacity ◽  
Matric Suction ◽  
Ultimate Bearing Capacity ◽  
Experimental Program ◽  
Granular Soils ◽  
Test Results ◽  
High Level ◽  
Unsaturated Granular Soils ◽  
Capacity Characteristic

An experimental program of laboratory bearing tests was performed to characterize the bearing capacity of foundation on unsaturated granular soils. All tests were performed by pushing a circular rod on the surface of compacted sand specimens with different values of matric suction until failure. The test results show an increase in ultimate bearing capacity with increasing matric suction at low suction value but a decrease in that at high level of suction. The comparisons between the test results and simulations using the expressions proposed in this paper are presented and discussed. Good agreements are achieved for all testing values of suction.

Sign in / Sign up

Export Citation Format

Share Document