Potential of Direct Water Injection to Reduce Knocking and Increase the Efficiency of Gasoline Engines

2017 ◽  
pp. 338-359 ◽  
Author(s):  
Matthias Hunger ◽  
Tobias Böcking ◽  
Ulrich Walther ◽  
Michael Günther ◽  
Normann Freisinger ◽  
...  
Keyword(s):  
Water Injection ◽  
Gasoline Engines ◽  
Direct Water Injection

Infrared Experimental Investigations on the Effects of Direct Water Injection in an Optical Engine

2021 ◽  
Author(s):  
Amer Farhat ◽  
Taewon Kim ◽  
Marcis Jansons ◽  
Ming-Chia Lai ◽  
Xin Yu
Keyword(s):  
Water Injection ◽  
Experimental Investigations ◽  
Optical Engine ◽  
Direct Water Injection

Significant NOx Reductions with Direct Water Injection into the Sub-Chamber of an IDI Diesel Engine

1995 ◽  
Author(s):  
Noboru Miyamoto ◽  
Hideyuki Ogawa ◽  
Jianxin Wang ◽  
Hiroshi Ohashi
Keyword(s):  
Diesel Engine ◽  
Water Injection ◽  
Direct Water Injection

Parametric analysis of simultaneous humidification and cooling for PEMFCs using direct water injection method

2017 ◽  
Vol 42 (17) ◽  
pp. 12531-12542 ◽  
Author(s):  
Eun Jung Choi ◽  
Seong Hoon Hwang ◽  
Jinyoung Park ◽  
Min Soo Kim
Keyword(s):  
Parametric Analysis ◽  
Water Injection ◽  
Injection Method ◽  
Direct Water Injection

Water injection for gasoline engines – potentials and challenges

2019 ◽  
pp. 115-138
Author(s):  
Ingo Hermann ◽  
Claus Glahn ◽  
Martin Paroll ◽  
Werner Gumprich
Keyword(s):  
Water Injection ◽  
Gasoline Engines

Effects of direct water injection and injector configurations on performance and emission characteristics of a gasoline direct injection engine: A computational fluid dynamics analysis

2019 ◽  
Vol 21 (8) ◽  
pp. 1520-1540 ◽  
Author(s):  
Ankit A Raut ◽  
J M Mallikarjuna
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Direct Injection ◽  
Water Injection ◽  
Gasoline Direct Injection ◽  
Water Evaporation ◽  
Emission Characteristics ◽  
Performance And Emission ◽  
Gasoline Direct Injection Engine ◽  
Direct Water Injection

In-cylinder water injection is a promising approach for reducing NOx and soot emissions from internal combustion engines. It allows one to use a higher compression ratio by reducing engine knock; hence, higher fuel economy and power output can be achieved. However, water injection can also affect engine combustion and emission characteristics if water injection and injector parameters are not properly set. Majority of the previous studies on the water injection are done through experiments. Therefore, subtle aspects of water injection such as in-cylinder interaction of water sprays, spatial distribution of water vapor, and effect on flame propagation are not clearly understood and rarely reported in literature due to experimental limitations. Thus, in the present article, a computational fluid dynamics investigation is carried out to analyze the effects of direct water injection under various injector configurations on water evaporation, combustion, performance, and emission characteristics of a gasoline direct injection engine. The emphasis is given to analyze in-cylinder water spray interactions, flame propagation, water spray droplet size distribution, and water vapor spatial distribution inside the engine cylinder. For the study, the water-to-fuel ratio is varied from 0 to 1. Various water injector configurations using nozzle hole diameters of 0.14, 0.179, and 0.205 mm, along with nozzle holes of 4, 5, 6, and 7, are considered for comparison in addition to the case of no_water. Computational fluid dynamics models used in this study are validated with the available data in literature. From the results, it is found that the emission and performance characteristics of the engine are highly dependent on water evaporation characteristics. Also, the water-to-fuel ratio of 0.6 with 6 number of nozzle holes and the nozzle diameter of 0.14 mm results in the highest indicated mean effective pressure and the lowest NOx, soot, and CO emissions compared to other cases considered.

Gasoline engine performance simulation of water injection and low-pressure exhaust gas recirculation using tabulated chemistry

2020 ◽  
Vol 21 (10) ◽  
pp. 1857-1877 ◽  
Author(s):  
Tim Franken ◽  
Fabian Mauss ◽  
Lars Seidel ◽  
Maike Sophie Gern ◽  
Malte Kauf ◽  
...  
Keyword(s):  
Carbon Monoxide ◽  
Nitrogen Oxide ◽  
Water Injection ◽  
Exhaust Gas Recirculation ◽  
Low Pressure ◽  
Exhaust Gas ◽  
Nitrogen Oxide Emissions ◽  
Direct Water Injection ◽  
Tabulated Chemistry ◽  
Gas Recirculation

This work presents the assessment of direct water injection in spark-ignition engines using single cylinder experiments and tabulated chemistry-based simulations. In addition, direct water injection is compared with cooled low-pressure exhaust gas recirculation at full load operation. The analysis of the two knock suppressing and exhaust gas cooling methods is performed using the quasi-dimensional stochastic reactor model with a novel dual fuel tabulated chemistry model. To evaluate the characteristics of the autoignition in the end gas, the detonation diagram developed by Bradley and co-workers is applied. The single cylinder experiments with direct water injection outline the decreasing carbon monoxide emissions with increasing water content, while the nitrogen oxide emissions indicate only a minor decrease. The simulation results show that the engine can be operated at λ = 1 at full load using water–fuel ratios of up to 60% or cooled low-pressure exhaust gas recirculation rates of up to 30%. Both technologies enable the reduction of the knock probability and the decrease in the catalyst inlet temperature to protect the aftertreatment system components. The strongest exhaust temperature reduction is found with cooled low-pressure exhaust gas recirculation. With stoichiometric air–fuel ratio and water injection, the indicated efficiency is improved to 40% and the carbon monoxide emissions are reduced. The nitrogen oxide concentrations are increased compared to the fuel-rich base operating conditions and the nitrogen oxide emissions decrease with higher water content. With stoichiometric air–fuel ratio and exhaust gas recirculation, the indicated efficiency is improved to 43% and the carbon monoxide emissions are decreased. Increasing the exhaust gas recirculation rate to 30% drops the nitrogen oxide emissions below the concentrations of the fuel-rich base operating conditions.

Potentials of cooled EGR and water injection for knock resistance and fuel consumption improvements of gasoline engines

2016 ◽  
Vol 169 ◽  
pp. 112-125 ◽  
Author(s):  
Fabio Bozza ◽  
Vincenzo De Bellis ◽  
Luigi Teodosio
Keyword(s):  
Fuel Consumption ◽  
Water Injection ◽  
Gasoline Engines
Sign in / Sign up

Export Citation Format

Share Document