Predictive mapping of seabed sediments based on multibeam bathymetric (BM), and backscatter (BS) data is effective for mapping the spatial distribution of the substrate. A robust modeling technique, the random forest decision tree (RFDT), was used to predict the seabed sediments in an area of the Joseph Bonaparte Gulf, Northern Australia, using the multibeam data and seabed sediment samples collected simultaneously. The results showed that: (1) Using multibeam bathymetry data in addition to multibeam backscatter data improves the prediction performance of the RFDT. In comparison to only multibeam backscatter data, the prediction performance achieved a ~10% improvement in sediment properties; it achieved a ~44.45% improvement of overall accuracy in sediment types, and a ~0.55 improvement in Kappa. (2) The underlying relationships between sediment properties and multibeam data show that there is an opposite non-linear correlation between sediment property-BS and sediment property-BM. For example, there is an obvious negative relationship between %mud-BS at incidence angles of 13° and 21°, but the relationship between %mud-BM is positive. As such, the RFDT is a useful and well-performing method in predicting the relationship between sediment properties and multibeam data and in predicting the distribution of sediment properties and types. However, the sediment prediction method in deep-water areas with high gravel content needs to be further evaluated.
Predicted Mapping of Seabed Sediments Based on MBES Backscatter and Bathymetric Data: A Case Study in Joseph Bonaparte Gulf, Australia, Using Random Forest Decision Tree