The Optimum Location of Delay Latches Between Dynamic Pipeline Stages

2007 ◽  
pp. 14-17
Author(s):  
Mahmoud Lotfi Anhar ◽  
Mohammad Ali Jabraeil Jamali
Keyword(s):  
Optimum Location

Study on Cuff-Less Blood Pressure Measurement Based on Electrocardiography and Photoplethysmography Signal

2019 ◽  
Vol 2 (3) ◽  
pp. 206-214
Author(s):  
Putri Indes Oktabriani ◽  
Fuad Ughi ◽  
Aulia Arif Iskandar
Keyword(s):  
Blood Pressure ◽  
Pressure Measurement ◽  
Blood Pressure Monitoring ◽  
Blood Pressure Measurement ◽  
Ecg Signal ◽  
Optimum Location ◽  
Blood Pressure Monitor ◽  
Pressure Monitor ◽  
Left Hand ◽  
Measure Blood Pressure

The continuous blood pressure measurement research is widely known for helpingthe development of ambulatory blood pressure monitoring where it measures blood pressureevery 15 to 30 minutes throughout the day. The cuff is a problem for the patient withAmbulatory Blood Pressure Monitor. It can make a person feel uncomfortable and must staystill when the cuff starts to inflate. It is limiting and disturbing their daily activity when thedevice is starting to measure the blood pressure. Blood pressure measurement without cuff isbeing proposed in this research, called cuff-less blood pressure measurement. It will be based onPhotoplethysmography (PPG) and Electrocardiography (ECG) signal analysis. ECG (Lead 1,Lead 2, and Lead 3) with PPG signal produced from index finger on the left hand are comparedand analyzed. Then the relation of PPG and ECG signal and the optimum location for daily usecan be obtained. The optimum location will be based on the electrode’s position that producedthe optimum ECG lead Signal to measure blood pressure. Based on the result, PPG and ECGsignal have a linear relation with Blood Pressure Measurement and Lead 1 is more stable inproducing the ECG signal. The equation from Lead 1 appeared as one of the optimum equationsfor measuring Systolic Blood Pressure (SBP) or Diastolic Blood Pressure (DBP).

Modeling of Strain Energy Harvesting in Pneumatic Tires Using Piezoelectric Transducer

2014 ◽  
Vol 42 (1) ◽  
pp. 16-34 ◽  
Author(s):  
Ali E. Kubba ◽  
Mohammad Behroozi ◽  
Oluremi A. Olatunbosun ◽  
Carl Anthony ◽  
Kyle Jiang
Keyword(s):  
Energy Harvesting ◽  
Strain Energy ◽  
Fiber Composite ◽  
Experimental Tests ◽  
Evaluation Study ◽  
Monitoring Systems ◽  
Monitoring Device ◽  
Optimum Location ◽  
Piezoelectric Fiber Composite ◽  
Piezoelectric Fiber

ABSTRACT This paper presents an evaluation study of the feasibility of harvesting energy from rolling tire deformation and using it to supply a tire monitoring device installed within the tire cavity. The developed technique is simulated by using a flexible piezoelectric fiber composite transducer (PFC) adhered onto the tire inner liner acting as the energy harvesting element for tire monitoring systems. The PFC element generates electric charge when strain is applied to it. Tire cyclic deformation, particularly at the contact patch surface due to rolling conditions, can be exploited to harvest energy. Finite element simulations, using Abaqus package, were employed to estimate the available strain energy within the tire structure in order to select the optimum location for the PFC element. Experimental tests were carried out by using an evaluation kit for the energy harvesting element installed within the tire cavity to examine the PFC performance under controlled speed and loading conditions.

Safe Workplace for Agricultural Tractor: Design Principle and Application

2021 ◽  
pp. 106480462110099
Author(s):  
Abhijit Khadatkar ◽  
Prabhakar Shukla
Keyword(s):  
Reference Point ◽  
Design Principle ◽  
Agricultural Workers ◽  
Optimum Location ◽  
Body Dimensions ◽  
Agricultural Tractor ◽  
Indian Male

This study focuses on developing a safe workplace for agricultural tractor drivers and recommending the optimum location for tractor control. Thirteen anthropometric body dimensions of 8,025 Indian male agricultural workers were considered for developing reach envelopes for hand- and foot-operated controls. The optimum reach for hand controls is in the range of 456 to 700 mm forward and 265 to 492 mm above the seat reference point. Similarly, for foot-operated control, the foot could reach within the range 429 to 897 mm forward and 367 mm below, and 30 mm above the seat reference point.

Optimum Location of an Internal Hinge of a Uniform Column on an Elastic Foundation

2008 ◽  
Vol 75 (3) ◽  
Author(s):  
C. Y. Wang
Keyword(s):  
Elastic Foundation ◽  
Optimum Location

The buckling of a column affected by both an internal hinge and an elastic foundation is studied analytically. It is found that the elastic foundation raises the buckling force, but nonlinearly. The optimum locations for the hinge are determined.

scholarly journals Optimum Location of DG for Loss Reduction with Ant Colony Algorithm

2021 ◽  
Vol 1045 (1) ◽  
pp. 012045
Author(s):  
Saodah Omar ◽  
Muhammad Nasrullah Abdul Manan ◽  
Muhammad Naqib Mat Siam ◽  
Ahmad Asri Abd Samat ◽  
Kamarul Azhar Daud
Keyword(s):  
Ant Colony Algorithm ◽  
Ant Colony ◽  
Loss Reduction ◽  
Optimum Location
Sign in / Sign up

Export Citation Format

Share Document