Objectivity, and Objective and Corotational Rate Tensors

Author(s):  
Koichi Hashiguchi
Keyword(s):  
Author(s):  
S. Alireza Momeni ◽  
Mohsen Asghari

In Hypo-elastic constitutive models an objective rate of the Cauchy stress tensor is expressed in terms of the current state of the stress and the deformation rate tensor D in a way that the dependency on the latter is a homogeneously linear one. In this work, a type of grade-one hypo-elastic models (i.e. models with linear dependency of the hypo-elasticity tensor on the stress) is considered for isotropic materials based on the objective corotational rates of stress. A positive real parameter denoted by n is involved in the considered type. Different values can be selected for this parameter, each selection leads to a specific model within the class of grade-one hypo-elasticity. The spin of the associated corotational rate is also dependent on the parameter n. In the special case of n=0, the corresponding hypo-elastic model reduces to a grade-zero one with the logarithmic rate of stress; noting that this rate is a corotational rate associated with the logarithmic spin tensor. Moreover, by choosing n=2, the model reduces to a grade-one hypo-elastic model with the Jaumann rate, i.e. the corotational rate associated with the vorticity spin tensor. As case studies, the simple shear problem is investigated with utilizing the considered type of hypo-elastic models with various values for parameter n, and the curves for the stress-shear response are depicted.


Volume 1 ◽  
2004 ◽  
Author(s):  
Kamyar Ghavam ◽  
Reza Naghdabadi

In this paper, based on the multiplicative decomposition of the deformation gradient tensor an elastic-plastic modeling of kinematic hardening materials is introduced. In this model, the elastic constitutive equation as well as the flow rule and hardening equation are expressed in terms of the corotational rate of the elastic and plastic logarithmic strains. As an application, the simple shear problem is solved and the stress components are plotted versus shear displacement for a kinematic hardening material.


Author(s):  
Reza Naghdabadi ◽  
Kamyar Ghavam

In this paper a model for analyzing elastic-plastic kinematic hardening materials is introduced, based on the additive decomposition of the corotational rate of an Eulerian strain tensor In this model, the elastic constitutive equation as well as the flow rule and the hardening equation is expressed in terms of the elastic and plastic parts of the corotational rate of the mentioned Eulerian stain tensor and its conjugate stress tensor. In the flow rule, the plastic part of the corotational rate of the Eulerian strain tensor is related to the difference of the deviatoric part of the conjugate stress and the back stress tensors. A proportionality factor is used in this flow rule which must be obtained from a consistency condition based on the von Mises yield criterion. A Prager type kinematic hardening model is used which relates the corotational rate of the back stress tensor to the plastic part of the corotational rate of the Eulerian strain tensor. Also in this paper a proper corotational rate corresponding to the Eulerian strain tensor is introduced. Finally the governing equations for the analysis of elastic-plastic kinematic hardening materials are obtained. As an application, these governing equations are solved numerically for the simple shear problem and the stress and back stress components are plotted versus the shear displacement. The results are compared with those, which are available in the literature.


Author(s):  
Kamyar Ghavam ◽  
Reza Naghdabadi

In this paper based on the multiplicative decomposition of the deformation gradient, the plastic spin tensor and the plastic spin corotational rate are introduced. Using this rate (and also log-rate), an elastic-plastic constitutive model for hardening materials are proposed. In this model, the Armstrong-Frederick kinematic hardening and the isotropic hardening equations are used. The proposed model is solved for the simple shear problem with the material properties of the stainless steel SUS 304. The results are compared with those obtained experimentally by Ishikawa [1]. This comparison shows a good agreement between the results of proposed theoretical model and the experimental data. As another example, the Prager kinematic hardening equation is used. In this case, the stress results are compared with those obtained by Bruhns et al. [2], in which they used the additive decomposition of the strain rate tensor.


Author(s):  
Reza Naghdabadi ◽  
Mehdi Yeganeh ◽  
Alireza Saidi

In this paper a flow rule for rigid plastic hardening materials based on von Mises yield criterion is introduced. This flow rule relates the corotational rate of the logarithmic strain tensor to the difference of the deviatoric Cauchy stress and the back stress tensors. Using different corotational rates in the proposed flow rule, the deviatoric Cauchy stress tensor is calculated for rigid plastic isotropic, kinematic and combined hardening materials in the simple shear problem at large deformations. For the purpose of verification, the results for different corotational rates are compared with the results presented in referenced articles.


Sign in / Sign up

Export Citation Format

Share Document