Compact Fourth-Order Finite-Volume Method for Numerical Solutions of Navier–Stokes Equations on Staggered Grids

Author(s):  
Arpiruk Hokpunna ◽  
Michael Manhart
Author(s):  
Roque Corral ◽  
Javier Crespo

A novel high-order finite volume method for the resolution of the Navier-Stokes equations is presented. The approach combines a third order finite volume method in an unstructured two-dimensional grid, with a spectral approximation in the third dimension. The method is suitable for the resolution of complex two-dimensional geometries that require the third dimension to capture three-dimensional non-linear unsteady effects, such as those for instance present in linear cascades with separated bubbles. Its main advantage is the reduction in the computational cost, for a given accuracy, with respect standard finite volume methods due to the inexpensive high-order discretization that may be obtained in the third direction using fast Fourier transforms. The method has been applied to the resolution of transitional bubbles in flat plates with adverse pressure gradients and realistic two-dimensional airfoils.


Author(s):  
Xingwei Zhang ◽  
Chaoying Zhou

Fundamental research on interaction between flow and structure is presented for computation the fluid dynamics of different two-dimensional oscillating models. The Navier-Stokes equations are solved using finite volume method. A multigrid mesh method which was applied to the situation of flow past the stagnating or vibrating cylinder is developed to simulate this type of flow. The interactive results between flow and structure rigid cylinders have been present. The computation fluid dynamic codes mainly with low Reynolds RANS solver are used to solve the impressible viscous Navier-Stokes equations. Finite volume method which is coupled with conformal hybrid mesh method is developed to simulate this type of flow. Numerical investigation focused on the response and the fluid forces on the cylinders and also observed the different shedding model in the wake. The numerical results are compared in detail with recent experimental and computational work. Present numerical comparison also showed that solution using different turbulence model will make the result have a little discrepancy and each turbulence model has respective characteristics in numerical solution on the vortex-induced vibration of the cylinder. In addition, the formation of the 2P vortex shedding model through the lock-in region and the beginning of the shedding model transformation in numerical calculation from 2S model to 2P model has been analyzed.


Sign in / Sign up

Export Citation Format

Share Document