Design and Development of Microstrip Patch Antenna for Millimeter-Wave Application

2018 ◽  
pp. 79-85 ◽  
Author(s):  
Kumari Mamta ◽  
Raj Kumar Singh ◽  
Navin Kumar Sinha ◽  
Ritesh Kumar Keshri
Keyword(s):  
Millimeter Wave ◽  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Design And Development ◽  
Microstrip Patch

83 GHz Microstrip Patch Antenna for Millimeter Wave Applications

2021 ◽  
Author(s):  
Abdulguddoos S. A. Gaid ◽  
Sultan M. E. Saleh ◽  
Akram H. M. Qahtan ◽  
Samar G. A. Aqlan ◽  
Belques A. E. Yousef ◽  
...  
Keyword(s):  
Millimeter Wave ◽  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Microstrip Patch

scholarly journals Design of a Single Band Microstrip Patch Antenna for 5G Applications

2018 ◽  
Vol 7 (2.7) ◽  
pp. 532 ◽  
Author(s):  
R Siri Chandana ◽  
P Sai Deepthi ◽  
D Sriram Teja ◽  
N Veera JayaKrishna ◽  
M Sujatha
Keyword(s):  
Millimeter Wave ◽  
Patch Antenna ◽  
Return Loss ◽  
Dielectric Substrate ◽  
Microstrip Patch Antenna ◽  
Single Band ◽  
Wave Frequency ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Simulation Purpose

This article is about a single band microstrip patch antenna used for the 5G applications. And this antenna is suitable for the millimeter wave frequency. The patch antenna design consists of 2 E shaped slots and 1 H shaped slot. These slots are loaded on the radiating patch with the 50 ohms microstrip feed line. For the simulation purpose, Rogers’s RT5880 dielectric substrate with relative permittivity of 2.2 and loss tangent of 0.0009 is used. The design and simulation of the antenna is done using HFSS (High Frequency Structure Simulator) software. The results are simulated for the parameters Return loss, VSWR, 3D Radiation pattern. The proposed antenna has a return loss of -42.4383 at 59 GHz millimeter wave frequency. 

Design and Development of Compact Microstrip Patch Antenna for Wireless Applications

2017 ◽  
Vol 6 (3) ◽  
pp. 1
Author(s):  
R. Nagendra ◽  
T. Venkateswarulu
Keyword(s):  
Patch Antenna ◽  
Impedance Matching ◽  
Characteristic Impedance ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Design And Development ◽  
Wireless Applications ◽  
Composite Patch ◽  
Microstrip Patch ◽  
Operating Band

In this paper, a novel dual band microstrip patch antenna based on composite patch antenna and radiating part. By selecting a suitable offset feed position, it is feasible to provide 50Ω characteristic impedance and thus making better impedance matching. The proposed antenna has been improved broader bandwidth by using RT Duroid substrate. The radiating part is plays a important role in creating a lower operating band (2.45 GHz) in addition to achieve miniaturization. The proposed antenna has to be fabricated with RT / Duroid substrate and dimensions of 19 × 22 × 0.8 mm. The measured -10 dB bandwidth of 200 MHz at 2.45 GHz and 990 MHz at 5.45 GHz, which is quite useful for Industrial, Scientific and Medical (ISM) and WLAN applications. 

Sign in / Sign up

Export Citation Format

Share Document