Effect of Toe Cutting on Hillslope Stability

Author(s):  
Rubi Chakraborty ◽  
Arindam Dey
Keyword(s):  
10.1029/wm011 ◽  
1985 ◽  
Author(s):  
Roy C. Sidle ◽  
Andrew J. Pearce ◽  
Colin L. O'Loughlin
Keyword(s):  
Land Use ◽  

TECCIENCIA ◽  
2020 ◽  
Vol 14 (26) ◽  
pp. 1-7
Author(s):  
Carlos Arturo Peña Rincón ◽  
Hermes Martínez

2007 ◽  
Vol 7 (5) ◽  
pp. 523-534 ◽  
Author(s):  
A. Talebi ◽  
R. Uijlenhoet ◽  
P. A. Troch

Abstract. Recently, we presented a steady-state analytical hillslope stability model to study rain-induced shallow landslides. This model is based on kinematic wave dynamics of saturated subsurface storage and the infinite slope stability assumption. Here we apply the model to investigate the effect of neglecting the unsaturated storage on the assessment of slope stability in the steady-state hydrology. For that purpose we extend the hydrological model to compute the soil pore pressure distribution over the entire flow domain. We also apply this model for hillslopes with non-constant soil depth to compare the stability of different hillslopes and to find the critical slip surface in hillslopes with different geometric characteristics. In order to do this, we incorporate more complex approaches to compute slope stability (Janbu's non-circular method and Bishop's simplified method) in the steady-state analytical hillslope stability model. We compare the safety factor (FS) derived from the infinite slope stability method and the more complex approach for two cases: with and without the soil moisture profile in the unsaturated zone. We apply this extended hillslope stability model to nine characteristic hillslope types with three different profile curvatures (concave, straight, convex) and three different plan shapes (convergent, parallel, divergent). Overall, we find that unsaturated zone storage does not play a critical role in determining the factor of safety for shallow and deep landslides. As a result, the effect of the unsaturated zone storage on slope stability can be neglected in the steady-state hydrology and one can assume the same bulk specific weight below and above the water table. We find that steep slopes with concave profile and convergent plan shape have the least stability. We also demonstrate that in hillslopes with non-constant soil depth (possible deep landslides), the ones with convex profiles and convergent plan shapes have slip surfaces with the minimum safety factor near the outlet region. In general, when plan shape changes from divergent to convergent, stability decreases for all length profiles. Finally, we show that the applied slope stability methods and steady-state hydrology model based on the relative saturated storage can be used safely to investigate the relation between hillslope geometry and hillslope stability.


TECCIENCIA ◽  
2020 ◽  
Vol 14 (26) ◽  
pp. 1-7
Author(s):  
Carlos Peña Rincón ◽  
Hermes Martinez

TECCIENCIA ◽  
2019 ◽  
Vol 14 (26) ◽  
pp. 1-7
Author(s):  
Carlos Arturo Peña Rincón ◽  
Hermes Martinez

2013 ◽  
Vol 59 (No. 11) ◽  
pp. 417-423 ◽  
Author(s):  
R. Naghdi ◽  
S. Maleki ◽  
E. Abdi ◽  
R. Mousavi ◽  
M. Nikooy

The role of plant roots in stabilizing slopes is obvious, but the amount of the effect is varied in different species. The purpose of this study was to evaluate the effect of alder (Alnus subcordata) roots on hillslope stability. The profile trenching method was used to obtain root characteristics and a standard Instron testing machine was used for determining the tensile strength of roots. Direct shear test with undisturbed samples was used for determining the soil strength parameters. Using the results of biotechnical characteristics and the Wu model, the reinforcement effect was calculated. Using the reinforcement values and soil strength parameters and Slip4Ex program, factor of safety with and without vegetation was calculated. The obtained results indicated that the root density and number of roots decreased with increasing depth and the average root area ratio was 0.071% ± 0.01. Tensile strength decreased with increasing diameter of roots following the power function with an average of 16.29 ± 3.10 MPa. The minimum and maximum of reinforcement were 0.55 KPa and 110.76 KPa, respectively. The results of this paper augment the knowledge about biotechnical characteristics of root systems of Alder species and indicate that this species increases the factor of safety about 16.79%.


2002 ◽  
Vol 16 (14) ◽  
pp. 2833-2851 ◽  
Author(s):  
Marco Borga ◽  
Giancarlo Dalla Fontana ◽  
Carlo Gregoretti ◽  
Lorenzo Marchi

Sign in / Sign up

Export Citation Format

Share Document