Sintered iron filters for the fine purification of diesel fuel

1965 ◽  
Vol 3 (5) ◽  
pp. 423-427
Author(s):  
V. N. Morozov ◽  
Yu. N. Semenov
2019 ◽  
Vol 23 (8) ◽  
pp. 4-7
Author(s):  
G.I. Pavlov ◽  
P.V. Nakorjakov ◽  
O.R. Sitnikov ◽  
A.I. Akhmetshina

This article describes a method of burning fuel without spraying through the nozzle due to the conversion of the liquid fraction in the vapor phase in vortex flow. When this occurs the flammable liquid in the vortex zone is carried out not through a calibrated orifice (nozzle), and the tube having a diameter of several tens of times larger than the nozzle diameter. This principle is equally effective can be burned as fuel commodity and pitched liquid combustible waste without fine purification.


2020 ◽  
pp. 59-66
Author(s):  
Ie.V. Polunkin ◽  
◽  
V.S. Pilyavsky ◽  
Ya.O. Bereznitsky ◽  
T.M. Kamenieva ◽  
...  
Keyword(s):  

Author(s):  
Petar Kazakov ◽  
Atanas Iliev ◽  
Emil Marinov

Over the decades, more attention has been paid to emissions from the means of transport and the use of different fuels and combustion fuels for the operation of internal combustion engines than on fuel consumption. This, in turn, enables research into products that are said to reduce fuel consumption. The report summarizes four studies of fuel-related innovation products. The studies covered by this report are conducted with diesel fuel and usually contain diesel fuel and three additives for it. Manufacturers of additives are based on already existing studies showing a 10-30% reduction in fuel consumption. Comparative experimental studies related to the use of commercially available diesel fuel with and without the use of additives have been performed in laboratory conditions. The studies were carried out on a stationary diesel engine СМД-17КН equipped with brake КИ1368В. Repeated results were recorded, but they did not confirm the significant positive effect of additives on specific fuel consumption. In some cases, the factors affecting errors in this type of research on the effectiveness of fuel additives for commercial purposes are considered. The reasons for the positive effects of such use of additives in certain engine operating modes are also clarified.


2013 ◽  
Vol 23 (8) ◽  
pp. 725-744 ◽  
Author(s):  
Mohd Zaid Akop ◽  
Yoshio Zama ◽  
Tomohiko Furuhata ◽  
Masataka Arai

2014 ◽  
Vol 24 (8) ◽  
pp. 651-671 ◽  
Author(s):  
Mohd Zaid Akop ◽  
Yoshio Zama ◽  
Tomohiko Furuhata ◽  
Masataka Arai
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document