Correlation between viscoelastic properties of letterpress printing inks and film splitting parameters

1975 ◽  
Vol 14 (11) ◽  
pp. 1001-1011 ◽  
Author(s):  
I. N. Watson ◽  
F. R. Young
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Thomas Rathschlag

Abstract This review article is a summary of the current knowledge in the field of colorants in printing applications. Printing inks belong as well as paints, coatings, plastics, and cosmetic formulations to the most important application systems for colorants, both for pigments and dyes. Colorants have to meet increasing demands in printing applications due to the considerable number of printing methods and consequently of a large number of specific printing formulations. Crucial factors besides the specific properties of a certain printing ink are the processing method and the required quality of the final printed product. Amongst the most important printing methods are letterpress printing, offset printing, flexographic printing, gravure printing, screen printing, and digital printing. Different processing methods are used for coloring of the individual printing inks. The coloring processes need to be coordinated in accordance with the steps of the printing processes leading to the final product.


1993 ◽  
Vol 3 (5) ◽  
pp. 597-602 ◽  
Author(s):  
Gregory A. DiLisi ◽  
E. M. Terentjev ◽  
Anselm C. Griffin ◽  
Charles Rosenblatt

Author(s):  
E. M. Timanin ◽  
N. S. Sydneva ◽  
A. A. Zakharova

Introduction. To date there is a lack of studies dedicated to the objectification of the palpation data obtained by a specialist during the osteopathic examination. The issue of the evidence of the results of osteopathic correction still remains important. Search for instrumental methods allowing to register and to measure various palpation phenomena and manifestations of somatic dysfunctions is very relevant for the development of osteopathy as a science. It is also very important to find objective characteristics of these methods.Goal of research — to study viscoelastic characteristics of the soft tissues of the lower legs by palpation and instrumental methods before and after osteopathic correction.Materials and methods. 22 volunteers (12 women and 10 men) aged 18–23 years without complaints of the musculoskeletal system were examined. Osteopathic diagnostics and measurement of the viscoelastic properties of muscles were carried out by the method of vibration viscoelastometry before and after osteopathic correction.Results. Correlation analysis by Spearman showed that the subjective assessment of an osteopath positively correlated with both elasticity (r=0,43, p<0,05) and viscosity of soft issues (r=0,29, p<0,05). For the gastrocnemius muscle, this pattern was even more pronounced — for elasticity r=0,51, p<0,05, for viscosity =0,34, p<0,05. After osteopathic correction no changes in the elasticity of the soft tissues were observed. The viscosity of the tissues reduced, but in the projection of the gastrocnemius muscle, these changes were not statistically significant (p=0,12), whereas in the projection of the soleus muscle statistically significant changes (p=0,034) were observed.Conclusion. Changes in the viscoelastic properties of tissues demonstrated that the effects of osteopathic correction with the use of myofascial mobilization techniques, articulation mobilization techniques, and lymphatic drainage techniques were not obvious. The elasticity of soft tissues of the lower legs did not change, while the viscosity decreased, especially in the projection of the soleus muscles. This effect of the osteopathic correction can be associated with the effect of thixotropy — the transformation of gel-like intercellular substance into sol. Thus, the research showed that vibration viscoelastometry can be used for the objectifi cation of the condition of soft tissues and of the effects of osteopathic correction.


TAPPI Journal ◽  
2011 ◽  
Vol 10 (9) ◽  
pp. 7-13
Author(s):  
KHODADAD MALMIRCHEGINI ◽  
FARSHAD SARKHOSH RAHMANI

Flexography is an evolving printing technology that is suitable for printing on coated and uncoated paperboard and board, nonporous substrates including metalized and paperboard foils, and plastic films used especially in the packaging industry. This study evaluated the effect of paperboard and ink characteristics on flexographic print density in paperboard. Three commercial paperboards from different companies were prepared: brown kraft from Thailand, white kraft from Spain, and test liner from Iran. Four samples of process print inks from Iran were used in this investigation. Paperboard properties, such as roughness and water absorption, and ink characteristics, including solids content, PH and particle diameter, were measured. The inks were printed on paperboards using a roll no.15 applicator with a blade metering device, and the print densities were measured. Results showed that solids content, pH, and particle diameter of printing inks influenced print density, while the roughness and water absorption of the three types of paperboard had no significant influence on print density. Results also illustrated that two levels of ink viscosity (25–30 and 50–55 mPa·s) were insignificant to print density.


2010 ◽  
Vol 1 (2) ◽  
pp. 56
Author(s):  
Arturo Rodriguez ◽  
Mohini M. Sain ◽  
Robert Jeng ◽  
Alexis Baltazar y Jimenez

Sign in / Sign up

Export Citation Format

Share Document