Optical phonons of Rare-Earth halides in a magnetic field

1977 ◽  
Vol 26 (4) ◽  
pp. 323-328 ◽  
Author(s):  
Peter Thalmeier ◽  
Peter Fulde



1965 ◽  
Author(s):  
R. E. Thoma


Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3717
Author(s):  
Jae-Young Jung ◽  
Soung-Soo Yi ◽  
Dong-Hyun Hwang ◽  
Chang-Sik Son

The precursor prepared by co-precipitation method was sintered at various temperatures to synthesize crystalline manganese tungstate (MnWO4). Sintered MnWO4 showed the best crystallinity at a sintering temperature of 800 °C. Rare earth ion (Dysprosium; Dy3+) was added when preparing the precursor to enhance the magnetic and luminescent properties of crystalline MnWO4 based on these sintering temperature conditions. As the amount of rare earth ions was changed, the magnetic and luminescent characteristics were enhanced; however, after 0.1 mol.%, the luminescent characteristics decreased due to the concentration quenching phenomenon. In addition, a composite was prepared by mixing MnWO4 powder, with enhanced magnetism and luminescence properties due to the addition of dysprosium, with epoxy. To one of the two prepared composites a magnetic field was applied to induce alignment of the MnWO4 particles. Aligned particles showed stronger luminescence than the composite sample prepared with unsorted particles. As a result of this, it was suggested that it can be used as phosphor and a photosensitizer by utilizing the magnetic and luminescent properties of the synthesized MnWO4 powder with the addition of rare earth ions.



Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4079
Author(s):  
Radhalayam Dhanalakshmi ◽  
Nambi Venkatesan Giridharan ◽  
Juliano C. Denardin

Magnetic-field-accelerated photocatalytic degradation of the phenol red (PR) as a model organic pollutant was studied using rare-earth elements modified BiFeO3 (Bi1−xRxFeO3 (R = Ce, Tb; x = 0.0, 0.05, 0.10 and 0.15); BFO: RE) nanostructures. The nanostructures were prepared via the hydrothermal process and their morphological, structural, functional, optical and magnetic features were investigated in detail. The effect of magnetic fields (MFs) on photocatalysis were examined by applying the different MFs under visible light irradiation. The enhanced photodegradation efficiencies were achieved by increasing the MF up to 0.5T and reduced at 0.7T for the compositions x = 0.10 in both Ce and Tb substituted BFO. Further, mineralization efficiencies of PR, reproducibility of MF-assisted photocatalysis, stability and recyclability of BFO: RE nanostructures were also tested.





1931 ◽  
Vol s5-22 (131) ◽  
pp. 426-430 ◽  
Author(s):  
A. Pabst




2017 ◽  
Vol 46 (40) ◽  
pp. 13756-13767 ◽  
Author(s):  
Maja A. Dunstan ◽  
Elodie Rousset ◽  
Marie-Emmanuelle Boulon ◽  
Robert W. Gable ◽  
Lorenzo Sorace ◽  
...  

Two tetraoxolene-bridged dinuclear Dy(iii) complexes exhibit slow relaxation in ac magnetic susceptibility studies with zero-field quantum tunnelling of the magnetisation that is suppressed by the application of a dc magnetic field.



2015 ◽  
Vol 792 ◽  
pp. 476-481
Author(s):  
Michele Forzan ◽  
Fabrizio Dughiero

This paper presents a review of the research activities carried out at the Laboratory for Electroheat of Padova University (LEP) in the field of high efficiency through heating of aluminum workpieces. Induction heating obtained by rotating a billet in a DC magnetic field produced by superconductive coils was the first attempt to reach high electrical efficiency in mass heating of high conductive metals, like aluminum, copper and brass. More recently, the same concept has been applied by rotating rare earth permanent magnets around a metal billet kept in a fixed position. This technology appears much more promising because of lower cost of installation and a more robust mechanical design.



Sign in / Sign up

Export Citation Format

Share Document