The impedance matching element of dielectric image line

1986 ◽  
Vol 3 (3) ◽  
pp. 204-210
Author(s):  
Shi Meiqi
2018 ◽  
Vol 10 (3) ◽  
pp. 336-344 ◽  
Author(s):  
Rajarshi Sanyal ◽  
Partha Pratim Sarkar ◽  
Santosh Kumar Chowdhury

This article presents a compact novel quasi-self-complementary semi-octagonal-shaped antenna for ultra-wideband (UWB) application. The proposed novel structure is fed by a microstrip line where different rectangular truncation is etched to the ground plane as an impedance matching element, which results for much wider impedance bandwidth (VSWR<2) from 2.9 to 20 GHz. In order to obtain band-notched characteristics at 5.5 GHz, an open-ended, quarter wavelength, spiral-shaped stub is introduced in the vicinity of the truncated part of the ground plane. An equivalent circuit model is adopted to investigate the band rejection characteristics of the ground plane stub. Sharpness of the rejection band can be controlled by maintaining the gap between stub resonator and the slotted periphery of ground plane. The proposed antenna design is validated by experimental measurements.


Materials ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 2921 ◽  
Author(s):  
Wei Huang ◽  
Yujiang Wang ◽  
Shicheng Wei ◽  
Bo Wang ◽  
Yi Liang ◽  
...  

Hollow magnetic structures have great potential to be used in the microwave absorbing field. Herein, Fe3O4 hollow spheres with different levels of hollowness were synthesized by the hydrothermal method under Ostwald ripening effect. In addition to their microstructures, the microwave absorption properties of such spheres were investigated. The results show that the grain size and hollowness of Fe3O4 hollow spheres both increase as the reaction time increases. With increasing hollowness, the attenuation ability of electromagnetic wave of Fe3O4 spheres increases first and then decreases, finally increases sharply after the spheres break down. Samples with strong attenuation ability can achieve good impedance matching, which it does preferentially as the absorber thickness increases. Fe3O4 hollow spheres show the best microwave absorption performance when the reaction time is 24 h. The minimum reflection loss (RL (min)) can reach −40 dB, while the thickness is only 3.2 mm.


Frequenz ◽  
2020 ◽  
Vol 74 (5-6) ◽  
pp. 191-199
Author(s):  
M. K. Verma ◽  
Binod K. Kanaujia ◽  
J. P. Saini ◽  
Padam S. Saini

AbstractA broadband circularly polarized slotted square patch antenna with horizontal meandered strip (HMS) is presented and studied. The HMS feeding technique provides the good impedance matching and broadside symmetrical radiation patterns. A set of cross asymmetrical slots are etched on the radiating patch to realize the circular polarization. An electrically small stub is added on the edge of the antenna for further improvement in performance. Measured 10-dB impedance bandwidth (IBW) and 3-dB axial ratio bandwidth (ARBW) of the proposed antenna are 32.31 % (3.14–4.35 GHz) and 20.91 % (3.34–4.12 GHz), respectively. The gain of the antenna is varied from 3.5 to 4.86dBi within 3-dB ARBW. Measured results matched well with the simulated results.


Sign in / Sign up

Export Citation Format

Share Document