On the numerical analysis of the nonstationary Navier-Stokes equations

1990 ◽  
pp. 180-193 ◽  
Author(s):  
Rolf Rannacher
Keyword(s):  
Numerical Analysis ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Navier Stokes Equations

scholarly journals Navier Stokes Equations: Theory and Numerical Analysis

1978 ◽  
Vol 45 (2) ◽  
pp. 456-456 ◽  
Author(s):  
Roger Temam ◽  
A. Chorin
Keyword(s):  
Numerical Analysis ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Navier Stokes Equations

Variation of Hydraulic Performance by Impeller Trimming of a Mixed-Flow Pump

2015 ◽  
Author(s):  
Hyeonmo Yang ◽  
Sung Kim ◽  
Kyoung-Yong Lee ◽  
Young-Seok Choi ◽  
Jin-Hyuk Kim
Keyword(s):  
Numerical Analysis ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Total Efficiency ◽  
Mixed Flow ◽  
Navier Stokes Equations ◽  
Ansys Cfx ◽  
Total Head ◽  
Flow Pump

One of the best examples of wasted energy is the selection of oversized pumps versus the rated conditions. Oversized pumps are forced to operate at reduced flows, far from their highest efficiency point. An unnecessarily large impeller will produce more flow than required, wasting energy. In the industrial field, trimming the impeller diameter is used more than changing the rotation speed to reduce the head of a pump. In this paper, the impeller trimming method of a mixed-flow pump is defined, and the variation in pump performance by reduction of the impeller diameter was predicted based on computational fluid dynamics. The impeller was trimmed to the same meridional ratio of the hub and shroud, and was compared in five cases. Numerical analysis was performed, including the inlet and outlet pipes in configurations of the mixed-flow pump to be tested. The commercial CFD code, ANSYS CFX-14.5, was used for the numerical analysis, and a three-dimensional Reynolds-averaged Navier-Stokes equations with a shear stress transport turbulence model were used to analyze incompressible turbulence flow. The performance parameters for evaluating the trimmed pump impellers were defined as the total efficiency and total head at the designed flow rate. The numerical and experimental results for the trimmed pump impellers were compared and discussed in this work.

scholarly journals Effect of Impeller Parameters on the Flow inside the Centrifugal Blower using CFD

2020 ◽  
Vol 8 (6) ◽  
pp. 3977-3980
Keyword(s):  
Numerical Analysis ◽  
Stokes Equations ◽  
Control Volume ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Navier Stokes ◽  
Computational Domain ◽  
Centrifugal Blower ◽  
Impeller Blade ◽  
Navier Stokes Equations

A numerical analysis is carried out to understand the flow characteristics for different impeller configurations of a single stage centrifugal blower. The volute design is based on constant velocity method. Four different impeller configurations are selected for the analysis. Impeller blade geometry is created with point by point method. Numerical simulation is carried out by CFD software GAMBIT 2.4.6 and FLUENT 6.3.26. GAMBIT work includes geometry definition and grid generation of computational domain. This process includes selection of grid types, grid refinements and defining correct boundary conditions. Processing work is carried out in FLUENT. The viscous Navier-Stokes equations are solved with control volume approach and the k-ε turbulence model. In this three dimensional numerical analysis is carried out with steady flow approach. The rotor and stator interaction is solved by mixing plane approach. Results of simulation are presented in terms of flow parameters, at impeller outlet and various angular positions inside the volute. Also, the contours of flow properties are presented at the outlet plane of fluid domain. Results suggest that for the same configurations of centrifugal blower, as we change geometrical parameter of impeller the flow inside the blower get affected.

Sign in / Sign up

Export Citation Format

Share Document