scholarly journals WAAM process for metal block structure parts based on mixed heat input

2021 ◽  
Vol 113 (1-2) ◽  
pp. 503-521
Author(s):  
Junyi Cui ◽  
Lei Yuan ◽  
Philip Commins ◽  
Fengyang He ◽  
Jun Wang ◽  
...  
2017 ◽  
Vol 33 (6) ◽  
pp. 445-452
Author(s):  
Monika Fleischhauer

Abstract. Accumulated evidence suggests that indirect measures such as the Implicit Association Test (IAT) provide an increment in personality assessment explaining behavioral variance over and above self-reports. Likewise, it has been shown that there are several unwanted sources of variance in personality IATs potentially reducing their psychometric quality. For example, there is evidence that individuals use imagery-based facilitation strategies while performing the IAT. That is, individuals actively create mental representations of their person that fit to the category combination in the respective block, but do not necessarily fit to their implicit personality self-concept. A single-block IAT variant proposed by attitude research, where compatible and incompatible trials are presented in one and the same block, may prevent individuals from using such facilitation strategies. Consequently, for the trait need for cognition (NFC), a new single-block IAT version was developed (called Moving-IAT) and tested against the standard IAT for differences in internal consistency and predictive validity in a sample of 126 participants. Although the Moving-IAT showed lower internal consistency, its predictive value for NFC-typical behavior was higher than that of the standard IAT. Given individual’s strategy reports, the single-block structure of the Moving-IAT indeed reduces the likelihood of imagery-based strategies.


CICTP 2020 ◽  
2020 ◽  
Author(s):  
Wanqing Zhang ◽  
Jinyan Zhu ◽  
Ying Cheng ◽  
Chen Liu ◽  
Rongchun Shi

2010 ◽  
Vol 48 (04) ◽  
pp. 289-296 ◽  
Author(s):  
Myung-Bok Kim ◽  
Sang-Ju Kim ◽  
Bong-Keun Lee ◽  
Xinjian Yuan ◽  
Byoung-Hyun Yoon ◽  
...  

2020 ◽  
Vol 38 (1A) ◽  
pp. 88-104
Author(s):  
Anwar S. Barrak ◽  
Ahmed A. M. Saleh ◽  
Zainab H. Naji

This study is investigated the thermal performance of seven turns of the oscillating heat pipe (OHP) by an experimental investigation and CFD simulation. The OHP is designed and made from a copper tube with an inner diameter 3.5 mm and thickness 0.6 mm and the condenser, evaporator, and adiabatic lengths are 300, 300, and 210 mm respectively.  Water is used as a working fluid with a filling ratio of 50% of the total volume. The evaporator part is heated by hot air (35, 40, 45, and 50) oC with various face velocity (0.5, 1, and 1.5) m/s. The condenser section is cold by air at temperature 15 oC. The CFD simulation is done by using the volume of fluid (VOF) method to model two-phase flow by conjugating a user-defined function code (UDF) to the FLUENT code. Results showed that the maximum heat input is 107.75 W while the minimum heat is 13.75 W at air inlet temperature 35 oC with air velocity 0.5m/s. The thermal resistance decreased with increasing of heat input. The results were recorded minimum thermal resistance 0.2312 oC/W at 107.75 W and maximum thermal resistance 1.036 oC/W at 13.75W. In addition, the effective thermal conductivity increased due to increasing heat input.  The numerical results showed a good agreement with experimental results with a maximum deviation of 15%.


Sign in / Sign up

Export Citation Format

Share Document