Experimental study on thermal performance of micro pin fin heat sinks with various shapes

2016 ◽  
Vol 53 (3) ◽  
pp. 1093-1104 ◽  
Author(s):  
Junye Hua ◽  
Gui Li ◽  
Xiaobao Zhao ◽  
Qihe Li
Keyword(s):  
Experimental Study ◽  
Thermal Performance ◽  
Heat Sinks ◽  
Pin Fin

An Experimental Study of Pin Fin Heat Sinks and Determination of End Wall Heat Transfer

2003 ◽  
Author(s):  
Massimiliano Rizzi ◽  
Ivan Catton
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Heat Sink ◽  
Optimization Methods ◽  
Heat Sinks ◽  
Base Region ◽  
Transfer Coefficients ◽  
Media Type ◽  
Pin Fin ◽  
Heat Transfer Coefficients

An experimental study of a pin fin heat sink was carried out in support of the development of heat sink optimization methods requiring more detailed measurements be made. Measurements of heat flux and temperature are used to separately determine heat transfer coefficients for the pins and the base region between the pins. Three pitch to diameter ratios (distance from pin center to pin center measured diagonally) were studied: P/d = 3/1, 9/4, 3/2. Heat generation was accomplished using cartridge heaters inserted into a copper block. The high thermal conductivity of the copper ensured that the surface beneath the heat sink would be at a constant temperature. The cooling fluid was air and the experiments were conducted with a Reynolds numbers based on a porous media type hydraulic diameter ranging from 500 to 25000. The channel had a shroud that touches the fin tips, eliminating any flow bypass. The pin surface heat transfer coefficients match the values reported by Kays and London and by Zukauskas. The base region heat transfer coefficients were, surprisngly, larger than the pin values.

Thermo-Mechanical Fatigue Life Prediction of Orthotropic Composite Pin Fin Heat Sinks for Electronic Packaging

2011 ◽  
Author(s):  
Sulaman Pashah ◽  
Abul Fazal M. Arif
Keyword(s):  
Thermal Performance ◽  
Heat Sink ◽  
Electronic Packaging ◽  
Base Plate ◽  
Heat Sinks ◽  
Metallic Base ◽  
Plate Interface ◽  
Pin Fin ◽  
Pin Fins ◽  
Reliability Performance

Heat sinks are used in modern electronic packaging system to enhance and sustain system thermal performance by dissipating heat away from IC components. Pin fins are commonly used in heat sink applications. Conventional metallic pins fins are efficient in low Biot number range whereas high thermal performance can be achieved in high Biot number regions with orthotropic composite pin fins due to their adjustable thermal properties. However, several challenges related to performance as well as manufacturing need to be addressed before they can be successfully implemented in a heat sink design. A heat sink assembly with metallic base plate and polymer composite pin fins is a solution to address manufacturing constraints. During the service life of an electronic packaging, the heat sink assembly is subjected to power cycles. Cyclic thermal stresses will be important at the pin-fin and base-plate interface due to thermal mismatch. The cyclic nature of stresses can lead to fatigue failure that will affect the reliability of the heat sink and electronic packaging. A finite element model of the heat sink is used to investigate the thermal stress cyclic effect on thermo-mechanical reliability performance. The aim is to assess the reliability performance of the epoxy bond at the polymer composite pin fins and metallic base plate interface in a heat-sink assembly.

S-Shaped Pin-Fins for Enhancement of Overall Performance of the Pin-Fin Heat Sink

2010 ◽  
Author(s):  
T. J. John ◽  
B. Mathew ◽  
H. Hegab
Keyword(s):  
Reynolds Number ◽  
Thermal Resistance ◽  
Thermal Performance ◽  
Heat Sink ◽  
Heat Sinks ◽  
Uniform Heat Flux ◽  
Pumping Power ◽  
Pin Fin ◽  
Pin Fins ◽  
Overall Performance

In this paper the authors are studying the effect of introducing S-shaped pin-fin structures in a micro pin-fin heat sink to enhance the overall thermal performance of the heat sinks. For the purpose of evaluating the overall thermal performance of the heat sink a figure of merit (FOM) term comprising both thermal resistance and pumping power is introduced in this paper. An optimization study of the overall performance based on the pitch distance of the pin-fin structures both in the axial and the transverse direction, and based on the curvature at the ends of S-shape fins is also carried out in this paper. The value of the Reynolds number of liquid flow at the entrance of the heat sink is kept constant for the optimization purpose and the study is carried out over a range of Reynolds number from 50 to 500. All the optimization processes are carried out using computational fluid dynamics software CoventorWARE™. The models generated for the study consists of two sections, the substrate (silicon) and the fluid (water at 278K). The pin fins are 150 micrometers tall and the total structure is 500 micrometer thick and a uniform heat flux of 500KW is applied to the base of the model. The non dimensional thermal resistance and nondimensional pumping power calculated from the results is used in determining the FOM term. The study proved the superiority of the S-shaped pin-fin heat sinks over the conventional pin-fin heat sinks in terms of both FOM and flow distribution. S-shaped pin-fins with pointed tips provided the best performance compared to pin-fins with straight and circular tips.

Thermal Performance Analysis of Fan-Heat Sinks for CPU Cooling

2003 ◽  
Author(s):  
Seo Young Kim ◽  
Ralph L. Webb
Keyword(s):  
Thermal Resistance ◽  
Thermal Performance ◽  
Heat Sink ◽  
Heat Sinks ◽  
Operating Point ◽  
Pin Fin ◽  
Flow Impedance ◽  
Impedance Curve ◽  
Convective Thermal ◽  
Offset Strip Fin

The thermal performance of plate fin, round pin-fin and offset strip-fin heat sinks with a duct-flow type fan arrangement was analytically evaluated. Heat sinks of 65mm × 60mm plan area × 50 mm height with a 4300-RPM DC fan (60mm × 15mm) were chosen for the performance comparison. A constant temperature, 6 mm thick heat sink base plate is assumed so that thermal spreading resistance is not involved. The operating point on the fan curve is based on the flow pressure drop impedance curve through a heat sink using the friction factor correlation for the chosen heat sink. The loss coefficients at both the entrance and the exit of heat sink are included in the flow impedance curve. The operating point is defined by the balance point of the flow impedance curve and the fan performance curve. After determining the operating air velocity, the convective thermal resistance of heat sinks is evaluated from the Nusselt number correlation for the chosen heat sink. Results obtained show that optimized round pin-fin heat sinks provide 32.8%-to-46.4% higher convective thermal resistance compared to an optimized plate-fin heat sink. The optimized offset strip-fin heat sink shows a slightly lower convective thermal resistance than the plate-fin heat sink. As the offset strip length decreases, however, thermal performance seriously deteriorates.

Sign in / Sign up

Export Citation Format

Share Document