Recycling of used lubricating oil by solvent extraction: experimental results, Aspen Plus simulation and feasibility study

Author(s):  
Nancy Zgheib ◽  
Hosni Takache
2020 ◽  
Vol 3 ◽  
pp. 100010
Author(s):  
José C. Velasco-Calderón ◽  
Arturo A. Garcia-Figueroa ◽  
José Luis Lopez Cervantes ◽  
Jesús Gracia-Fadrique

Data in Brief ◽  
2018 ◽  
Vol 19 ◽  
pp. 2240-2252 ◽  
Author(s):  
Temitayo E. Oladimeji ◽  
Jacob A. Sonibare ◽  
James A. Omoleye ◽  
Abiola A. Adegbola ◽  
Hilary I. Okagbue

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
O. P. Abioye ◽  
P. Agamuthu ◽  
A. R. Abdul Aziz

Soil and surface water contamination by used lubricating oil is a common occurrence in most developing countries. This has been shown to have harmful effects on the environment and human beings at large. Bioremediation can be an alternative green technology for remediation of such hydrocarbon-contaminated soil. Bioremediation of soil contaminated with 5% and 15% (w/w) used lubricating oil and amended with 10% brewery spent grain (BSG), banana skin (BS), and spent mushroom compost (SMC) was studied for a period of 84 days, under laboratory condition. At the end of 84 days, the highest percentage of oil biodegradation (92%) was recorded in soil contaminated with 5% used lubricating oil and amended with BSG, while only 55% of oil biodegradation was recorded in soil contaminated with 15% used lubricating oil and amended with BSG. Results of first-order kinetic model to determine the rate of biodegradation of used lubricating oil revealed that soil amended with BSG recorded the highest rate of oil biodegradation (0.4361 day−1) in 5% oil pollution, while BS amended soil recorded the highest rate of oil biodegradation (0.0556 day−1) in 15% oil pollution. The results of this study demonstrated the potential of BSG as a good substrate for enhanced remediation of hydrocarbon contaminated soil at low pollution concentration.


2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Yan-zhen Wang ◽  
Hai-long Xu ◽  
Li Gao ◽  
Meng-meng Yan ◽  
Hong-ling Duan ◽  
...  

Step-by-step solvent extraction was used to regenerate spent clay by recovering the adsorbed oil in lubricating oil refining clay. Several polar and nonpolar solvents were tested, and petroleum ether (90–120°C) and ethanol (95 v%) were selected as the nonpolar and polar solvents, respectively. The spent clay was first extracted using petroleum ether (90–120°C) to obtain ideal oil and then extracted with a mixed solvent of petroleum ether (90–120°C) and ethanol (95 v%) two or three times to obtain nonideal oil before being extracted with ethanol and water. Finally, the clay was dried at 130°C to obtain regenerated clay. The total oil recovery can be more than 99 wt% of the adsorbed oil. The recovered ideal oil can be used as lubricating base oil. Shorter storage times for spent clay produce better regeneration results. The regenerated clay can be reused to refine the lubricating base oils.


Fuel ◽  
2019 ◽  
Vol 239 ◽  
pp. 717-725 ◽  
Author(s):  
Yangchao Xia ◽  
Zili Yang ◽  
Rui Zhang ◽  
Yaowen Xing ◽  
Xiahui Gui

Author(s):  
Karen Hosomi Teramae ◽  
Mariana Lopes de Sousa ◽  
Dejanira de Fransceschi De Angelis ◽  
Ederio Dino Bidoia

Sign in / Sign up

Export Citation Format

Share Document